Symposium CA
Advances in Processing Science and Manufacturing of High Performance Ceramics and Composites
Session CA-1 Advances in powder synthesis and processing
CA-1:IL01 From Droplet Evolution to Activity: Process–Structure–Property Design via Glatt Powder Synthesis
J. BUCHHEIM, V. DRESCHER, T. VOCKENBERG, Glatt Ingenieurtechnik Gmbh, Weimar, Germany
CA-1:IL02 Synthesis of Aerogels as Functional Ceramics: Routes to Improved Thermal Stability
J.A. KROGSTAD, University of Illinois Urbana Champaign, Urbana, IL, USA
CA-1:L03 Application of Radiation-Thermal Sintering of Deposited Functional Layers of Structured Catalysts, Membranes and Solid Oxide Fuel Cells
Y. BESPALKO1, N. EREMEEV1, O. BULAVCHENKO1, E. SUPRUN, M. MIKHAILENKO2, M. KOROBEYNIKOV3, V. SADYKOV1, 1Federal Research Center Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia; 2Institute of Solid State Chemistry and Mechanochemistry SB RAS, Novosibirsk, Russia; 3Budker Institute of Nuclear Physics SB RAS, Novosibirsk, Russia
CA-1:L04 Alternative Methods for the Calibration of the Drucker-Prager/Cap Model, Application to the MOX Fuel Shaping
B. SPANU1, T. REBILLON1, J. P. BAYLE1, A. SOCIÉ2, T. HELFER2, G. BERNARD-GRANGER1, 1CEA, DES, ISEC, DMRC, Univ. Montpellier, Marcoule, France; 2CEA, DES, IRESNE, DEC, Saint-Paul-lez-Durance, France
CA-1:L05 Application of the Heterocoagulation Phenomenon in Reactive Sintering of MgAl₂O₄ and Production of MgAl₂O₄- Al₂O₃ Composites
O. JURECKA, K. KORNAUS, Ł. ZYCH, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Kraków, Poland
CA-1:IL06 Sintering Investigations of UO2 and MOX Formulations: Mechanisms and Microstructure
G. BERNARD-GRANGER, CEA/DES/ISEC/DMRC/SPTC/LSEM & Université de Montpellier Centre de Marcoule, Bagnols sur Cèze, France
CA-1:IL07 Multiscale Microstructure Control of Ceramics Using Powder Assembly Techniques
HIROYUKI MUTO, Toyohashi University of Technology, Institute of Liberal Arts and Sciences, Department of Electrical and Electronics Information Engineering, Institute for Research on Next Generation Semiconductor and Sensing Science, Toyohashi, Japan
CA-1:L08 Computational Modeling of Cold Press Compaction in B4C Ceramic Powder
M.C. ŞİMŞEK, K. KAYA, Ş. RAKICI, M.B. ÜNAL, H.H. TÜRKMEN, Oğulbey Mah., Ankara, Türkiye
CA-1:L09 CuO-TiO2-Nb2O5 Sintering Aid for Reducing Sintering Temperature of Alumina and Zirconia Ceramics
R. SHAKIRZYANOV, N. VOLODINA, YU. GARANIN, K. KALIYEKPEROVA, A. KOZLOVSKIY, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; The Institute of Nuclear Physics, Almaty, Kazakhstan
CA-1:L10 Optimizing Iron Removal from Fly Ashes of Varying Compositions for Use in Ceramic Applications
S. SHADDEL, C.C. SORRELL, P. KOSHY, School of Materials Science and Engineering, University of New South Wales, Sydney, NSW, Australia
CA-1:IL11 Colloidal Approach to the Additive Manufacturing of Cemented Carbides
A. MARTINEZ-BARJA, B. FERRARI, A. FERRANDEZ, A.J. SANCHEZ-HERENCIA, Institute for Ceramic and Glass, Madrid, Spain
CA-1:IL12 Different Powder Technology Routes for TZP Ceramics with Multiple Stabilizers
F. KERN, B. OSSWALD, University of Stuttgart, IKMT, Stuttgart, Germany
CA-1:L13 Synthesis of Monodispersed ZrC Nanoparticles Derived from MOF-801
YUN ZOU, H.J. LEE, S.H. LEE, Korea Institute of Materials Science, Changwon, Republic of Korea
CA-1:L14 Mechanical Destabilization Drives Thermally-activated Phase Transformation in Layered MAX Phases
B. RATZKER1,2, O. MESSER2, M. SOKOL2, 1Max Planck Institute for Sustainable Materials, Düsseldorf, Germany; 2Tel Aviv University, Israel
CA-1:L15 Understanding the Sintering of MOX Nuclear Fuels: Challenges Associated with the Characterization of a Multiphasic Microstructure
E. MOREL, F. LEBRETON, L. GAUTHIER, L. RAMOND, G. BERNARD-GRANGER, CEA, DES, ISEC, DMRC, Univ Montpellier, Marcoule, France; G. CUNHA COSTA MIRANDA, T. GENEVES, ORANO MELOX, Chusclan, France
CA-1:L16 Enhanced Alumina Sintering Via Electrostatically Assembled Alumina Composite Particles
WAI KIAN TAN, KATSUMI FUJISHIRO, GO KAWAMURA, ATSUNORI MATSUDA, HIROYUKI MUTO, Toyohashi University of Technology, Toyohashi, Aichi, Japan
CA-1:L17 Structural and Optical Evolution of BaCuSi₄O₁₀ and BaCuSi₂O₆ Obtained through a Scalable, Cost-Effective Precipitation Process
M. BALAYAN, A. ISAHAKYAN, A. TERZYAN, H. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia; Yerevan State University, Yerevan, Armenia
Session CA-2 Advanced molecular-level processing of functional nanomaterials
CA-2:IL18 Direct Coating and Patterning of Nano-Structured Ceramic Materials in/from Solution via Soft, Solution Processing
MASAHIRO YOSHIMURA, Prof. Emeritus Tokyo Institute of Technology, presently KISTEC, Kanagawa, Japan; Former Distinguished Chair Professor, Dept of Mater.,Sci. and Eng., National Cheng Kung University, Tainan, Taiwan
CA-2:IL19 Automated Flow Reactors for the Controlled Synthesis of Functional Materials
J. DE MELLO, Norwegian Open Laboratory for High Throughput Experimentation and Scale-Up Norwegian University of Science and Technology, Trondheim, Norway
CA-2:IL20 Transition-Metal Ceramic Electrocatalysts with Bifunctional Activity for Aqueous Zinc-Air Batteries
J. GONZÁLEZ-MORALES¹, M. APARICIO¹, J. MOSA¹, ¹Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
Session CA-3 Polymer-derived ceramics
CA-3:IL21 Engineering the Unmeltable: The Rise of Polymer-derived Ceramics for Extreme Environments
R. RIEDEL, Technical University of Darmstadt, Darmstadt, Germany
CA-3:IL22 Ceramic Matrix Nanocomposites from Tailor-made Preceramic Polymers
S. BERNARD, CNRS, IRCER, UMR 7315, Univ. Limoges, Limoges, France
CA-3:IL23 Generation of Polymer-derived Ceramic Coatings on Light Metals via Laser Treatment
G. MOTZ, S. SCHAFFÖNER, A. HORCHER, University of Bayreuth, Ceramic Materials Engineering (CME), Bayreuth, Germany; K. TANGERMANN-GERK, Bayerisches Laserzentrum GmbH, Erlangen, Germany
CA-3:IL24 Polymer-derived Amorphous Silicon Nitride-Based Nanocomposites
YUJI IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
CA-3:IL25 Polymer-derived Ceramics as Thermal and Environmental Barrier Coatings
N.-C. PETRY, M.C. GALETZ, DECHEMA research institute, Frankfurt, Germany; A.S. ULRICH, Metals and Alloys II, University of Bayreuth, Bayreuth, Germany; M. LEPPLE, Institute of Inorganic and Analytical Chemistry, Justus Liebig University Giessen, Giessen, Germany
CA-3:L26 Synthesis, Constituents, and Processing Technologies for UHTCMCs
J.H. DELCAMP, L. RUESCHHOFF, Z. APOSTOLOV, M.B. DICKERSON, T.L. PRUYN, Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA
CA-3:L27 Ultraviolet Curing of Polysilazane-based Coating System with Metallic Fillers
J.-F. WENDEL, A. FISCHER, S. SCHAFFÖNER, G. MOTZ, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany; D. LEYKAM, Chair of Electrochemical Process Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany
Session CA-4 Microwave processing
CA-4:IL28 Microwave Synthesis of MAX Phases and Beyond
V. JOSHI, C.S. BIRKEL, Arizona State University, Tempe, AZ, USA
CA-4:IL29 Microwave-assisted Catalysis Constructed at the Atomic Scale
FUMINAO KISHIMOTO, The University of Tokyo, Tokyo, Japan
CA-4:IL30 Microwave-assisted Chemical Vapor Infiltration of SiCf/SiC Composites: State-of-the-art and Recent Developments
R. D’AMBROSIO1, A. CINTIO1, A. LAZZERI1,2, G. ANNINO1, 1Istituto per i Processi Chimico-Fisici, IPCF-CNR, Pisa, Italy; 2Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy
CA-4:L31 Pressure-assisted Microwave Sintering of Lead Free Piezoelectric Ceramics
A. ONFROY, C. MANIERE, S. MARINEL, Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
Session CA-5 Novel sintering approaches - Spark Plasma, Flash Sintering, Laser Sintering, Cold Sintering
CA-5:IL32 Cold Sintering of Functional Materials and Control of Grain Boundaries
C.A. RANDALL, Materials Research Institute, Department of Material Science and Engineering The Pennsylvania State University, University Park, PA, USA
CA-5:IL33 In Situ Analysis of Solid-liquid Interfaces during Cold Sintering Process through Impedance Spectroscopy
T. HERISSON DE BEAUVOIR, E. SANCHEZ, A. KORBI, N. ALBAR, C. ESTOURNÈS, CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France
CA-5:IL34 Cold Sintering of Electroceramics: Road to Solution or Troubles?
M. OTONIČAR1,2, M. LACHHAB1,2, A. ABASS SHAH1, A. LALAGUE-DARDANT1,3, S. SALMANOV1, D. KUŠČER1,2, B. MALIČ11,2, 1Jožef Stefan Institute, Electronic ceramics department, Ljubljana, Slovenia; 2Jožef Stefan International postgraduate school, Ljubljana, Slovenia; 3GREMAN laboratory, University of Tours, Blois, France
CA-5:IL35 Very High Heating Rate during Ceramic Sintering vs Conventionnal Sintering: Influence on Microstructure and Properties
C. ESTOURNÈS1, T. HERISSON DE BEAUVOIR1, E. MARTIN1, L. KARACASULU2, G. CHEVALLIER1, A. WEIBEL1, C. MANIÈRE3, M. BIESUZ2, 1CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France; 2University of Trento, Department of Industrial Engineering, Trento, Italy; 3Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
CA-5:IL36 Fabrication of Transparent Oxide Ceramics by Spark-Plasma-Sintering
KOJI MORITA, National Institute for Materials Science (NIMS), Research Center for Electronic and Optical Materials, Polycrystalline Optical Material Group, Tsukuba, Japan
CA-5:IL37 Scale-bridging Processing of Advanced Ceramics
D. GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands
CA-5:L38 Application of Discrete Element Simulations to Two-step Sintering
B. PAREDES-GOYES1, D. JAUFFRES2, C.L. MARTIN2, 1IMT Mines Albi, Université de Toulouse, CNRS, Centre RAPSODEE, Albi, France; 2Université Grenoble-Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
CA-5:L39 Fabrication of Boron-Rich Boron Carbide Ceramics (B₁₀C) by Hybrid High-Energy Ball Milling and Reactive SPS
N. KESHTKAR, J. LOPEZ-ARENAL, B. MALMAL MOSHTAGHIOUN, D. GOMEZ-GARCÍA, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Sevilla, Spain
CA-5:L40 Behavior of a C/UHTC Composite under Oxy-Acetylene Torch: In-Situ Analysis
F. TRAD1, J. SEYMOUR1, T. BOURDEAU1, J. BRAUN2, G. COUÉGNAT1, F. REBILLAT1, L. MAILLÉ1, 1Laboratoire des Composites ThermoStructuraux, UMR 5801 - CNRS - CEA - Safran - Université de Bordeaux, Pessac, France; 2CEA, DAM Le Ripault, Monts, France
CA-5:IL41 Low-temperature Chemical Densification of Ceramic Membranes for Electrochemical Devices
YUKI YAMAGUCHI, National Institute of Advance Industrial Science and Technology (AIST), Nagoya, Japan
CA-5:L42 Pressure-assisted Densification of 3D printed ZrB2 Using Minimal Sintering Additives by Quasi-HIP Approach
S. BHANDARI, F. LEBAS, C. MANIERE, Université de Caen Normandie, CRISMAT, Normandie University, ENSICAEN, CNRS, Caen, France
CA-5:L43 Design of Porous Silica Compacts via Cold Sintering Process
SHIORI NAWA1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
CA-5:L44 Spontaneous Crystallization of Amorphous SiC
T. AYVAZYAN1, M. ZAKARYAN1, K. NAZARETYAN1, K. MANUKYAN2, S. KHARATYAN1, 1Laboratory of Macrokinetics of Solid State Reactions, Institute of Chemical Physics NAS of Armenia, Yerevan, Armenia; 2Nuclear Science Laboratory, Department of Physics and Astronomy, University of Notre Dame, Notre Dame, IN, USA
Session CA-6 Inorganic Functionally Graded Materials
CA-6:IL45 Synthesis of Functional Electrochemical Materials from Inorganic–organic Hybrid Precursors
YOSHIYUKI SUGAHARA, School of Advanced Science and Engineering and Kagami Memorial Institute for Materials Science and Technology, Waseda University, Tokyo, Japan
CA-6:IL46 Additive Manufacturing of Zirconia-based Multi-material Components with Improved Mechanical Resistance
FEI ZHANG1,2, JUNHUI ZHANG1,2, B. NEIRINCK3, J. VLEUGELS1, 1KU Leuven, Department of Materials Engineering, Leuven, Belgium; 2KU Leuven, Department of Oral Health Sciences, BIOMAT -Biomaterials Research group & UZ Leuven, Dentistry, Leuven, Belgium; 3Schaeffler Aerosint SA, Herstal, Belgium
CA-6:L47 Room-Temperature Crack Healing of TiC Ceramics via Electrochemical Process and its Mechanism
JINYU LIU1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2 Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
Session CA-7 SHS ceramics
CA-7:L48 Synthesis of Non-stoichiometric Carbides and Carbohydrides of Ti-Nb-Zr, using Self-propagating High-temperature Synthesis Technique
A. HOVHANNISYAN, S. DOLUKHANYAN, O. TER-GALSTYAN, N. MNATSAKANYAN, G. MURADYAN, E. VARDANYAN, A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, Yerevan, Armenia
CA-7:L49 The Influence of Nb, Cr, Mn Alloying on the Process of γ -TiAl Formation by High-temperature Synthesis (SHS) and Hydride Cycle (HC) Methods
G. MURADYAN1, S. DOLUKHANYAN1, O. TER-GALSTYAN1, N. MNATSAKANYAN1, S. KHASANOV2, S. MARDANYAN3, E. VARDANYAN1, 1A. B. Nalbandyan Institute of Chemical Physics of NAS RA, Yerevan, Republic of Armenia; 2Y. A. Osipyan Institute of Solid-State Physics of RAS, Chernogolovka, Moscow District, Russia; 3H. Kh. Buniatian Institute of Biochemistry of NAS RA, Yerevan, Republic of Armenia
CA-7:L50 Ti₂AlB MAX Phase and MXene Derivative Prepared by Self-Propagating High-Temperature Synthesis
N. AMIRKHANYAN¹, M.A. RODRIGUEZ², J. ROSEN³, S. AYDINYAN¹˒⁴, S. KHARATYAN¹, ¹A.B. Nalbandyan Institute of Chemical Physics, NAS RA, Yerevan, Armenia; ²Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain; ³Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden; ⁴Tallinn University of Technology, Tallinn, Estonia
Session CA-8 The glass ceramics route
CA-8:IL51 Aluminate Glasses: from Glass to Ceramics
D. GALUSEK, Centre for Functional and Surface-functionalized Glass, TnUAD, Trenčín, Slovakia; and Joint Glass Centre of the IIC SAS, TnUAD, and FChPT STU, Trenčín, Slovakia
CA-8:IL52 Solid-state Field-assisted Ion Exchange of Ag in Lithium Aluminum Silicate Glass-ceramics
M. BIESUZ, V.M. SGLAVO, G.D. SORARÙ, Department of Industrial Engineering, University of Trento, Trento, Italy
Session CA-9 Other special processing routes
CA-9:IL53 Light-assisted Solidification Templating of Preceramic Polymers towards Porous Ceramic CO2 Utilization Frameworks
T. KONEGGER, K. RAUCHENWALD, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
CA-9:IL54 High-Pressure Synthesis and Crystal Chemistry of Novel Functional Transition-Metal Silicides
T. SASAKI, T. KITAHARA, K. NIWA, M. HASEGAWA, Department of Materials Physics, Nagoya University, Nagoya, Aichi, Japan
CA-9:IL55 In-situ Exploration of New Materials under Extreme Conditions using the Large Volume Press at beamline P61B DESY
S. BHAT, Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany
CA-9:IL56 Using Cellulose Nanofibers as Polymeric Support and Biotemplate of Photocatalytic Nanophases to Shape 3D Advanced Structures
Z. GONZÁLEZ1,2, J.M. LUQUE1, G. ESTRELLA-GUISADO1, R. MONTENEGRO1,2, P. ORTEGA-COLUMBRANS3,4, A. RODRÍGUEZ1,2, B. FERRARI2,3, 1BioPrEn Group (RNM-940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, Córdoba, Spain; 2Unidad Asociada CSIC-UCO. Fabricación aditiva de materiales compuestos basados en celulosa funcionalizada, obtenida de residuos de biomasa, Spain; 3Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, Madrid, Spain; 4COLFEED4Print S.L., Tres Cantos, Madrid, Spain
CA-1:IL01 From Droplet Evolution to Activity: Process–Structure–Property Design via Glatt Powder Synthesis
J. BUCHHEIM, V. DRESCHER, T. VOCKENBERG, Glatt Ingenieurtechnik Gmbh, Weimar, Germany
CA-1:IL02 Synthesis of Aerogels as Functional Ceramics: Routes to Improved Thermal Stability
J.A. KROGSTAD, University of Illinois Urbana Champaign, Urbana, IL, USA
CA-1:L03 Application of Radiation-Thermal Sintering of Deposited Functional Layers of Structured Catalysts, Membranes and Solid Oxide Fuel Cells
Y. BESPALKO1, N. EREMEEV1, O. BULAVCHENKO1, E. SUPRUN, M. MIKHAILENKO2, M. KOROBEYNIKOV3, V. SADYKOV1, 1Federal Research Center Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia; 2Institute of Solid State Chemistry and Mechanochemistry SB RAS, Novosibirsk, Russia; 3Budker Institute of Nuclear Physics SB RAS, Novosibirsk, Russia
CA-1:L04 Alternative Methods for the Calibration of the Drucker-Prager/Cap Model, Application to the MOX Fuel Shaping
B. SPANU1, T. REBILLON1, J. P. BAYLE1, A. SOCIÉ2, T. HELFER2, G. BERNARD-GRANGER1, 1CEA, DES, ISEC, DMRC, Univ. Montpellier, Marcoule, France; 2CEA, DES, IRESNE, DEC, Saint-Paul-lez-Durance, France
CA-1:L05 Application of the Heterocoagulation Phenomenon in Reactive Sintering of MgAl₂O₄ and Production of MgAl₂O₄- Al₂O₃ Composites
O. JURECKA, K. KORNAUS, Ł. ZYCH, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Kraków, Poland
CA-1:IL06 Sintering Investigations of UO2 and MOX Formulations: Mechanisms and Microstructure
G. BERNARD-GRANGER, CEA/DES/ISEC/DMRC/SPTC/LSEM & Université de Montpellier Centre de Marcoule, Bagnols sur Cèze, France
CA-1:IL07 Multiscale Microstructure Control of Ceramics Using Powder Assembly Techniques
HIROYUKI MUTO, Toyohashi University of Technology, Institute of Liberal Arts and Sciences, Department of Electrical and Electronics Information Engineering, Institute for Research on Next Generation Semiconductor and Sensing Science, Toyohashi, Japan
CA-1:L08 Computational Modeling of Cold Press Compaction in B4C Ceramic Powder
M.C. ŞİMŞEK, K. KAYA, Ş. RAKICI, M.B. ÜNAL, H.H. TÜRKMEN, Oğulbey Mah., Ankara, Türkiye
CA-1:L09 CuO-TiO2-Nb2O5 Sintering Aid for Reducing Sintering Temperature of Alumina and Zirconia Ceramics
R. SHAKIRZYANOV, N. VOLODINA, YU. GARANIN, K. KALIYEKPEROVA, A. KOZLOVSKIY, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; The Institute of Nuclear Physics, Almaty, Kazakhstan
CA-1:L10 Optimizing Iron Removal from Fly Ashes of Varying Compositions for Use in Ceramic Applications
S. SHADDEL, C.C. SORRELL, P. KOSHY, School of Materials Science and Engineering, University of New South Wales, Sydney, NSW, Australia
CA-1:IL11 Colloidal Approach to the Additive Manufacturing of Cemented Carbides
A. MARTINEZ-BARJA, B. FERRARI, A. FERRANDEZ, A.J. SANCHEZ-HERENCIA, Institute for Ceramic and Glass, Madrid, Spain
CA-1:IL12 Different Powder Technology Routes for TZP Ceramics with Multiple Stabilizers
F. KERN, B. OSSWALD, University of Stuttgart, IKMT, Stuttgart, Germany
CA-1:L13 Synthesis of Monodispersed ZrC Nanoparticles Derived from MOF-801
YUN ZOU, H.J. LEE, S.H. LEE, Korea Institute of Materials Science, Changwon, Republic of Korea
CA-1:L14 Mechanical Destabilization Drives Thermally-activated Phase Transformation in Layered MAX Phases
B. RATZKER1,2, O. MESSER2, M. SOKOL2, 1Max Planck Institute for Sustainable Materials, Düsseldorf, Germany; 2Tel Aviv University, Israel
CA-1:L15 Understanding the Sintering of MOX Nuclear Fuels: Challenges Associated with the Characterization of a Multiphasic Microstructure
E. MOREL, F. LEBRETON, L. GAUTHIER, L. RAMOND, G. BERNARD-GRANGER, CEA, DES, ISEC, DMRC, Univ Montpellier, Marcoule, France; G. CUNHA COSTA MIRANDA, T. GENEVES, ORANO MELOX, Chusclan, France
CA-1:L16 Enhanced Alumina Sintering Via Electrostatically Assembled Alumina Composite Particles
WAI KIAN TAN, KATSUMI FUJISHIRO, GO KAWAMURA, ATSUNORI MATSUDA, HIROYUKI MUTO, Toyohashi University of Technology, Toyohashi, Aichi, Japan
CA-1:L17 Structural and Optical Evolution of BaCuSi₄O₁₀ and BaCuSi₂O₆ Obtained through a Scalable, Cost-Effective Precipitation Process
M. BALAYAN, A. ISAHAKYAN, A. TERZYAN, H. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia; Yerevan State University, Yerevan, Armenia
Session CA-2 Advanced molecular-level processing of functional nanomaterials
CA-2:IL18 Direct Coating and Patterning of Nano-Structured Ceramic Materials in/from Solution via Soft, Solution Processing
MASAHIRO YOSHIMURA, Prof. Emeritus Tokyo Institute of Technology, presently KISTEC, Kanagawa, Japan; Former Distinguished Chair Professor, Dept of Mater.,Sci. and Eng., National Cheng Kung University, Tainan, Taiwan
CA-2:IL19 Automated Flow Reactors for the Controlled Synthesis of Functional Materials
J. DE MELLO, Norwegian Open Laboratory for High Throughput Experimentation and Scale-Up Norwegian University of Science and Technology, Trondheim, Norway
CA-2:IL20 Transition-Metal Ceramic Electrocatalysts with Bifunctional Activity for Aqueous Zinc-Air Batteries
J. GONZÁLEZ-MORALES¹, M. APARICIO¹, J. MOSA¹, ¹Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
Session CA-3 Polymer-derived ceramics
CA-3:IL21 Engineering the Unmeltable: The Rise of Polymer-derived Ceramics for Extreme Environments
R. RIEDEL, Technical University of Darmstadt, Darmstadt, Germany
CA-3:IL22 Ceramic Matrix Nanocomposites from Tailor-made Preceramic Polymers
S. BERNARD, CNRS, IRCER, UMR 7315, Univ. Limoges, Limoges, France
CA-3:IL23 Generation of Polymer-derived Ceramic Coatings on Light Metals via Laser Treatment
G. MOTZ, S. SCHAFFÖNER, A. HORCHER, University of Bayreuth, Ceramic Materials Engineering (CME), Bayreuth, Germany; K. TANGERMANN-GERK, Bayerisches Laserzentrum GmbH, Erlangen, Germany
CA-3:IL24 Polymer-derived Amorphous Silicon Nitride-Based Nanocomposites
YUJI IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
CA-3:IL25 Polymer-derived Ceramics as Thermal and Environmental Barrier Coatings
N.-C. PETRY, M.C. GALETZ, DECHEMA research institute, Frankfurt, Germany; A.S. ULRICH, Metals and Alloys II, University of Bayreuth, Bayreuth, Germany; M. LEPPLE, Institute of Inorganic and Analytical Chemistry, Justus Liebig University Giessen, Giessen, Germany
CA-3:L26 Synthesis, Constituents, and Processing Technologies for UHTCMCs
J.H. DELCAMP, L. RUESCHHOFF, Z. APOSTOLOV, M.B. DICKERSON, T.L. PRUYN, Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA
CA-3:L27 Ultraviolet Curing of Polysilazane-based Coating System with Metallic Fillers
J.-F. WENDEL, A. FISCHER, S. SCHAFFÖNER, G. MOTZ, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany; D. LEYKAM, Chair of Electrochemical Process Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany
Session CA-4 Microwave processing
CA-4:IL28 Microwave Synthesis of MAX Phases and Beyond
V. JOSHI, C.S. BIRKEL, Arizona State University, Tempe, AZ, USA
CA-4:IL29 Microwave-assisted Catalysis Constructed at the Atomic Scale
FUMINAO KISHIMOTO, The University of Tokyo, Tokyo, Japan
CA-4:IL30 Microwave-assisted Chemical Vapor Infiltration of SiCf/SiC Composites: State-of-the-art and Recent Developments
R. D’AMBROSIO1, A. CINTIO1, A. LAZZERI1,2, G. ANNINO1, 1Istituto per i Processi Chimico-Fisici, IPCF-CNR, Pisa, Italy; 2Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy
CA-4:L31 Pressure-assisted Microwave Sintering of Lead Free Piezoelectric Ceramics
A. ONFROY, C. MANIERE, S. MARINEL, Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
Session CA-5 Novel sintering approaches - Spark Plasma, Flash Sintering, Laser Sintering, Cold Sintering
CA-5:IL32 Cold Sintering of Functional Materials and Control of Grain Boundaries
C.A. RANDALL, Materials Research Institute, Department of Material Science and Engineering The Pennsylvania State University, University Park, PA, USA
CA-5:IL33 In Situ Analysis of Solid-liquid Interfaces during Cold Sintering Process through Impedance Spectroscopy
T. HERISSON DE BEAUVOIR, E. SANCHEZ, A. KORBI, N. ALBAR, C. ESTOURNÈS, CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France
CA-5:IL34 Cold Sintering of Electroceramics: Road to Solution or Troubles?
M. OTONIČAR1,2, M. LACHHAB1,2, A. ABASS SHAH1, A. LALAGUE-DARDANT1,3, S. SALMANOV1, D. KUŠČER1,2, B. MALIČ11,2, 1Jožef Stefan Institute, Electronic ceramics department, Ljubljana, Slovenia; 2Jožef Stefan International postgraduate school, Ljubljana, Slovenia; 3GREMAN laboratory, University of Tours, Blois, France
CA-5:IL35 Very High Heating Rate during Ceramic Sintering vs Conventionnal Sintering: Influence on Microstructure and Properties
C. ESTOURNÈS1, T. HERISSON DE BEAUVOIR1, E. MARTIN1, L. KARACASULU2, G. CHEVALLIER1, A. WEIBEL1, C. MANIÈRE3, M. BIESUZ2, 1CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France; 2University of Trento, Department of Industrial Engineering, Trento, Italy; 3Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
CA-5:IL36 Fabrication of Transparent Oxide Ceramics by Spark-Plasma-Sintering
KOJI MORITA, National Institute for Materials Science (NIMS), Research Center for Electronic and Optical Materials, Polycrystalline Optical Material Group, Tsukuba, Japan
CA-5:IL37 Scale-bridging Processing of Advanced Ceramics
D. GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands
CA-5:L38 Application of Discrete Element Simulations to Two-step Sintering
B. PAREDES-GOYES1, D. JAUFFRES2, C.L. MARTIN2, 1IMT Mines Albi, Université de Toulouse, CNRS, Centre RAPSODEE, Albi, France; 2Université Grenoble-Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
CA-5:L39 Fabrication of Boron-Rich Boron Carbide Ceramics (B₁₀C) by Hybrid High-Energy Ball Milling and Reactive SPS
N. KESHTKAR, J. LOPEZ-ARENAL, B. MALMAL MOSHTAGHIOUN, D. GOMEZ-GARCÍA, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Sevilla, Spain
CA-5:L40 Behavior of a C/UHTC Composite under Oxy-Acetylene Torch: In-Situ Analysis
F. TRAD1, J. SEYMOUR1, T. BOURDEAU1, J. BRAUN2, G. COUÉGNAT1, F. REBILLAT1, L. MAILLÉ1, 1Laboratoire des Composites ThermoStructuraux, UMR 5801 - CNRS - CEA - Safran - Université de Bordeaux, Pessac, France; 2CEA, DAM Le Ripault, Monts, France
CA-5:IL41 Low-temperature Chemical Densification of Ceramic Membranes for Electrochemical Devices
YUKI YAMAGUCHI, National Institute of Advance Industrial Science and Technology (AIST), Nagoya, Japan
CA-5:L42 Pressure-assisted Densification of 3D printed ZrB2 Using Minimal Sintering Additives by Quasi-HIP Approach
S. BHANDARI, F. LEBAS, C. MANIERE, Université de Caen Normandie, CRISMAT, Normandie University, ENSICAEN, CNRS, Caen, France
CA-5:L43 Design of Porous Silica Compacts via Cold Sintering Process
SHIORI NAWA1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
CA-5:L44 Spontaneous Crystallization of Amorphous SiC
T. AYVAZYAN1, M. ZAKARYAN1, K. NAZARETYAN1, K. MANUKYAN2, S. KHARATYAN1, 1Laboratory of Macrokinetics of Solid State Reactions, Institute of Chemical Physics NAS of Armenia, Yerevan, Armenia; 2Nuclear Science Laboratory, Department of Physics and Astronomy, University of Notre Dame, Notre Dame, IN, USA
Session CA-6 Inorganic Functionally Graded Materials
CA-6:IL45 Synthesis of Functional Electrochemical Materials from Inorganic–organic Hybrid Precursors
YOSHIYUKI SUGAHARA, School of Advanced Science and Engineering and Kagami Memorial Institute for Materials Science and Technology, Waseda University, Tokyo, Japan
CA-6:IL46 Additive Manufacturing of Zirconia-based Multi-material Components with Improved Mechanical Resistance
FEI ZHANG1,2, JUNHUI ZHANG1,2, B. NEIRINCK3, J. VLEUGELS1, 1KU Leuven, Department of Materials Engineering, Leuven, Belgium; 2KU Leuven, Department of Oral Health Sciences, BIOMAT -Biomaterials Research group & UZ Leuven, Dentistry, Leuven, Belgium; 3Schaeffler Aerosint SA, Herstal, Belgium
CA-6:L47 Room-Temperature Crack Healing of TiC Ceramics via Electrochemical Process and its Mechanism
JINYU LIU1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2 Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
Session CA-7 SHS ceramics
CA-7:L48 Synthesis of Non-stoichiometric Carbides and Carbohydrides of Ti-Nb-Zr, using Self-propagating High-temperature Synthesis Technique
A. HOVHANNISYAN, S. DOLUKHANYAN, O. TER-GALSTYAN, N. MNATSAKANYAN, G. MURADYAN, E. VARDANYAN, A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, Yerevan, Armenia
CA-7:L49 The Influence of Nb, Cr, Mn Alloying on the Process of γ -TiAl Formation by High-temperature Synthesis (SHS) and Hydride Cycle (HC) Methods
G. MURADYAN1, S. DOLUKHANYAN1, O. TER-GALSTYAN1, N. MNATSAKANYAN1, S. KHASANOV2, S. MARDANYAN3, E. VARDANYAN1, 1A. B. Nalbandyan Institute of Chemical Physics of NAS RA, Yerevan, Republic of Armenia; 2Y. A. Osipyan Institute of Solid-State Physics of RAS, Chernogolovka, Moscow District, Russia; 3H. Kh. Buniatian Institute of Biochemistry of NAS RA, Yerevan, Republic of Armenia
CA-7:L50 Ti₂AlB MAX Phase and MXene Derivative Prepared by Self-Propagating High-Temperature Synthesis
N. AMIRKHANYAN¹, M.A. RODRIGUEZ², J. ROSEN³, S. AYDINYAN¹˒⁴, S. KHARATYAN¹, ¹A.B. Nalbandyan Institute of Chemical Physics, NAS RA, Yerevan, Armenia; ²Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain; ³Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden; ⁴Tallinn University of Technology, Tallinn, Estonia
Session CA-8 The glass ceramics route
CA-8:IL51 Aluminate Glasses: from Glass to Ceramics
D. GALUSEK, Centre for Functional and Surface-functionalized Glass, TnUAD, Trenčín, Slovakia; and Joint Glass Centre of the IIC SAS, TnUAD, and FChPT STU, Trenčín, Slovakia
CA-8:IL52 Solid-state Field-assisted Ion Exchange of Ag in Lithium Aluminum Silicate Glass-ceramics
M. BIESUZ, V.M. SGLAVO, G.D. SORARÙ, Department of Industrial Engineering, University of Trento, Trento, Italy
Session CA-9 Other special processing routes
CA-9:IL53 Light-assisted Solidification Templating of Preceramic Polymers towards Porous Ceramic CO2 Utilization Frameworks
T. KONEGGER, K. RAUCHENWALD, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
CA-9:IL54 High-Pressure Synthesis and Crystal Chemistry of Novel Functional Transition-Metal Silicides
T. SASAKI, T. KITAHARA, K. NIWA, M. HASEGAWA, Department of Materials Physics, Nagoya University, Nagoya, Aichi, Japan
CA-9:IL55 In-situ Exploration of New Materials under Extreme Conditions using the Large Volume Press at beamline P61B DESY
S. BHAT, Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany
CA-9:IL56 Using Cellulose Nanofibers as Polymeric Support and Biotemplate of Photocatalytic Nanophases to Shape 3D Advanced Structures
Z. GONZÁLEZ1,2, J.M. LUQUE1, G. ESTRELLA-GUISADO1, R. MONTENEGRO1,2, P. ORTEGA-COLUMBRANS3,4, A. RODRÍGUEZ1,2, B. FERRARI2,3, 1BioPrEn Group (RNM-940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, Córdoba, Spain; 2Unidad Asociada CSIC-UCO. Fabricación aditiva de materiales compuestos basados en celulosa funcionalizada, obtenida de residuos de biomasa, Spain; 3Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, Madrid, Spain; 4COLFEED4Print S.L., Tres Cantos, Madrid, Spain