Symposium FI
Caloric and Multicaloric Materials and Effects: from Fundamentals to Applications
MONDAY JUNE 22 AFTERNOON
Room: SPOLETO A
Chair: Franca ALBERTINI, Italy (Convener)
14.25 Welcome
Session FI-1 Theory, simulation and modeling of caloric materials
14.30 FI-1:IL01 Caloric Behaviour near Critical and Tricritical Points
A. PLANES, E. MENDIVE-TAPIA, Departament de Física de la Matèria Condensada, Universitat de Barcelona, Barcelona, Catalonia
15.00 FI-1:IL02 Fundamental Properties of Compositionally Complex Heusler-Based Compounds: Insights from DFT and XAS
O. MIROSHKINA1, B. EGGERT1, B. BECKMANN2, J. LILL1, D. KOCH2, F. SCHEIBEL2, K. OLLEFS1, W. DONNER2, O. GUTFLEISCH2, H. WENDE1, M.E. GRUNER1, 1University of Duisburg-Essen, Duisburg, NRW, Germany; 2Technical University of Darmstadt, Darmstadt, Hessen, Germany
15.30 FI-1:IL03 Searching for New Magnetocaloric Materials—A High-Throughput Approach
R. MARTINHO VIEIRA, Uppsala University, Uppsala, Sweden; T. BJÖRKMAN, Åbo Akademi, Åbo, Finland; O. ERIKSSON, H.C. HERPER, Uppsala University, Uppsala, Sweden
16.00 Break
Chair: Antoni PLANES, Spain
16.30 FI-1:IL04 Stress-Induced Martensitic Transformation in Ni2MnGa Single Crystals
L. RIGHI, Department of Chemistry, Life Sciences and Environmental Sustainability, University of Parma, Parma, Italy
17.00 FI-1:L05 Modelling the Dynamics of the Martensitic Transformation in Ni2MnGa with Machine-learning Force-fields
M.E. GRUNER, University of Duisburg-Essen, Duisburg, Germany; M.J. BRUCKHOFF, University of Duisburg-Essen, Duisburg, Germany
17.20 FI-1:IL06 Ab initio Understanding of Large Caloric Effects around First-order Magnetic Phase Transitions with Low Hysteresis
E. MENDIVE TAPIA, Universitat de Barcelona, Barcelona, Spain; D. BOLDRIN, University of Glasgow, UK; WEI LIU, K. SKOKOV, O. GUTFLEISCH, TU Darmstadt, Germany
TUESDAY JUNE 23 MORNING
Room: SPOLETO A
Chair: Luana CARON, Germany
Session FI-2 Preparation and characterization of caloric materials
8.30 FI-2:IL07 Simultaneous Application of Pressure and Electric Field in Ferroelectric Materials
M. ZENG1, M. ROMANINI1, I. GORICAN2, S. DRNOVSEK2, H. URSIC2,3, A. SALVATORI1, M. BARRIO1, S. LOEHLE4, N. OBRECHT4, C. ESCORIHUELA-SAYALERO1, C. CAZORLA1, A. TORELLÓ1, P. LLOVERAS1, J.-L. TAMARIT1, 1Group of Characterization of Materials, Department of Physics and Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Catalonia, Spain; 2Electronic Ceramics Department, Jozef Stefan Institute, Ljubljana, Slovenia; 3Jozef Stefan International Postgraduate School, Ljubljana, Slovenia; 4TotalEnergies OneTech, Solaize, France
9.00 FI-2:IL08 Caloric Properties of Spin Crossover-Polymer Compounds
K. LÜNSER1,2,3, C. SALAZAR MEJÍA4, T. GOTTSCHALL4, E. KAVAK5, K. GÜRPINAR6, B. EMRE5, O. ATAKOL6, M. PORTA3, A. PLANES3, P. LLOVERAS7, J.-LL. TAMARIT7, E. STERN-TAULATS3, LL. MAÑOSA3, 1Institute for Energy and Materials Processes – Applied Quantum Materials, University Duisburg-Essen, Duisburg, Germany; 2Research Center Future Energy Materials and Systems (RC FEMS), University of Duisburg-Essen, Duisburg, Germany; 3Universitat de Barcelona, Barcelona, Catalonia, Spain; 4Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany; 5Department of Engineering Physics, Faculty of Engineering, Ankara University, Ankara, Turkey; 6Department of Chemistry, Faculty of Science, Ankara University, Ankara, Turkey; 7Universitat Politècnica de Catalunya, Barcelona, Catalonia, Spain
9.30 FI-2:IL10 Multifunctional High Entropy Alloys for Caloric Applications
V. FOURNÉE1, D. SIHOM KWEKAM1, G. LENGAIGNE1, J. LEDIEU1, J. VALENTIN1, P. BOULET1, S. MIGOT1, J. GHANBAJA1, S. SEMSARI PARAPARI2, S. ŠTURM2, S. FABBRICI3, F. CUGINI3,4, M. SOLZI3,4, F. ALBERTINI3, 1Institut Jean Lamour, CNRS-Université de Lorraine, Nancy, France; 2Jozef Stefan Institute, Department for Nanostructured Materials, Ljubljana, Slovenia; 3Institute of Materials for Electronics and Magnetism (IMEM), CNR, Parma, Italy; 4Department of Physics, University of Parma, Parma, Italy
10.00 Break
Chair: Elena VILLA, Italy
10.30 FI-2:IL11 High Pressure Characterization of the Magnetoelastic Phase Transitions in Magnetocaloric Materials
L. CARON, Department of Physics, Bielefeld University, Bielefeld, Germany & Helmholtz-Zentrum Berlin für Materialien und Energie, Berlin, Germany
11.00 FI-2:IL12 Bulk Ceramics and Thick Films for Caloric Applications
H. URŠIČ1,2, M. D’ANGELO1, V. REGIS1,2, I. GORIČAN1,2, 1Electronic Ceramics Department, Jožef Stefan Institute, Ljubljana, Slovenia; 2Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
11.30 FI-2:L13 Development of Copper Based Shape Memory Alloy for Elastocaloric Cooling Applications
JUN CUI, Department of Materials Science and Engineering, Iowa State University, Ames, IA, USA
11.50 FI-2:L14 Exploring the Elastocaloric Potential of NiMnTi Alloys
F. VILLA1,2, E. BESTETTI1, ZEJUN DENG2, L. RIGHI3, D. SALAZAR4, N. BENNATO1, F. PASSARETTI1, R. CASATI2, E. VILLA1, 1CNR ICMATE, Lecco Unit, Lecco, Italy; 2Politecnico di Milano, Milano, Italy; 3Università di Parma, Parma, Italy; 4BCMaterials, Leioa, Spain
12.10 FI-2:L15 Revealing Complex Magnetic Interactions in Fe2P-based Compounds: A Study using Mössbauer Spectroscopy and Neutron Diffraction
K.K. THILAKAN, S. GHORAI, WEI LIU, L. HÄGGSTRÖM, F. LINDGREN, V. POMJAKUSHIN, P. BERAN, O. GUTFLEISCH, P. SVEDLINDH, J. CEDERVALL, Department of Chemistry - Ångström Laboratory, Uppsala University, Uppsala, Sweden Institute of Materials Science, Technical University of Darmstadt, Darmstadt, Germany; Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden; Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institut, Villigen, Switzerland; European Spallation Source ESS ERIC, Lund, Sweden Nuclear Physics Institute, ASCR, Rez, Czech Republic; Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
TUESDAY JUNE 23 AFTERNOON
Room: SPOLETO A
Chair: Lluis MANOSA, Spain
Session FI-2 Preparation and characterization of caloric materials
15.00 FI-3:IL25 Multicaloric Materials in Pulsed Magnetic Fields
T. GOTTSCHALL, T. NIEHOFF, E. BYKOV, M. STRASSHEIM, C. SALAZAR-MEJIA, J. WOSNITZA, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
15.30 FI-2:IL18 Multi-caloric Cooling for Room Temperature and Cryo-applications
O. GUTFLEISCH, A. AUBERT, A. DÖRING, B. BECKMANN, F. SCHEIBEL, WEI LIU, S. GHORAI, K. SKOKOV, TU Darmstadt, Functional Materials, Darmstadt, Germany
16.00 FI-2:L19 Fabrication of Pb(Sc0.5Ta0.5)O3 Thick Films by Powder Aerosol Deposition
M. D’ANGELO1, V. REGIS1,2, I. GORIČAN1,2, S. DRNOVŠEK1, H. URŠIČ1,2, 1Electronic Ceramics Department, Jožef Stefan Institute, Ljubljana, Slovenia; 2Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
16.20 Break
Chair: Oliver GUTFLEISCH, Germany
Session FI-3 Functional characterization of caloric materials
16.50 FI-3:IL20 New Versatile Instruments to Measure Element-specific and Macroscopic Hysteresis at ID12 of the ESRF
A. AUBERT, Functional Materials, TU Darmstadt, Darmstadt, Germany
17.20 FI-3:IL21 Recent Developments in Magnetocaloric Measurements
F. CUGINI1,2, G. GARULLI1, M. SOLZI1,2, 1University of Parma, Parma, Italy, 2IMEM-CNR Institute, Italy
17.50 FI-3:L22 Mechanocaloric Effects in Spin Crossover Complexes subjected to Uniaxial Load and Hydrostatic Pressure
L. MAÑOSA, E. STERN-TAULATS, A. PLANES, M. PORTA, E. VIVES, Universitat de Barcelona, Barcelona, Catalonia; K. GURPINAR, S. BOZUKS, E. KAVAK, B. EMRE, O. ATAKOL, Ankara University. Ankara, Turkey; K. LÜNSER, Universität Duisburg-Essen, Duisburg, Germany; A. SALVATORI, P. LLOVERAS, J.L. TAMARIT, Universitat Politècnica de Catalunya, Barcelona, Catalonia
18.10 FI-3:L23 Dynamics of the Phase Transformation in a Giant Magnetocaloric Material along T- and B-scans
F. GUILLOU, F. VEILLON, V. HARDY, Normandie University, ENSICAEN, UNICAEN, CNRS, CRISMAT, France; B. HUHE, Inner Mongolia Normal University, China
WEDNESDAY JUNE 24 MORNING
Room: SPOLETO A
Chair: Tino GOTTSCHALL, Germany
Session FI-3 Functional characterization of caloric materials
8.30 FI-2:IL16 Additive Manufacturing of Magnetocaloric and Thermomagnetic Materials via Polymer based Composite Filaments
V. FRANCO, Multidisciplinary Unit for Energy Science, University of Seville, Seville, Spain
9.00 FI-3:L26 NiMnGa-based Multicaloric Alloys: Experimental Investigation in Magneto-mechanical Coupling
E. VILLA, F. VILLA, E. BESTETTI, F. PASSARETTI, C. TOMASI, E. BASSANI, N. BENNATO, CNR ICMATE Lecco Unit, Lecco, Italy; CNR ICMATE Genova Unit, Genova, Italy
9.20 FI-3:L27 Beyond the Single-Phase Paradigm: Third-Generation High-Entropy Alloys with Enhanced Magnetocaloric Properties
JIA YAN LAW1, L. HAN2, D. RAABE2, O. GUTFLEISCH3, V. FRANCO1, 1Multidisciplinary Unit for Energy Science, University of Seville, Spain; 2Max Planck Institute for Sustainable Materials, Düsseldorf, Germany; 3Department of Materials Science, Technical University of Darmstadt, Darmstadt, Germany
9.40 FI-3:L28 In-Operando Comparison of Tailored Full-Heuslers with First- and Second-Order Transitions for Low-Grade Waste Heat Harvesting
E. RUSCONI, L. GALLO, S. FABBRICI, G. TREVISI, F. ALBERTINI, IMEM-CNR, Parma, Italy; F. CUGINI, M. SOLZI, Department of mathematical, physical and computer sciences of the University of Parma, Parma, Italy
10.00 Break
Chair: Ichiro TAKEUCHI, USA
Session FI-4 Devices for solid state refrigeration, heat pumps and other energy related applications
10.30 FI-4:IL29 Electrocaloric Cooling Devices
E. DEFAY, Luxembourg Institute of Science and Technology, Esch sur Alzette, Luxembourg
11.00 FI-4:IL30 Digital Twin Driven Design and Modelling of Next-generation Thermomagnetic Generators with Optimized Efficiency
A. IZADI1,2, S. FÄHLER1, 1Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany; 2Faculty of Mechanical Science and Engineering, TUD Dresden University of Technology, Dresden, Germany
11.30 FI-4:L31 Impact of Rotor Design on Heat Exchange Efficiency for Thermomagnetic Rotary Generators
L. GALLO, S. FABBRICI, F. ALBERTINI, IMEM-CNR, Parma, Italy; F. CUGINI, G. GARULLI, M. SOLZI, University of Parma, Parma, Italy; J.Y. LAW, V. FRANCO, University of Sevilla, Sevilla, Spain
11.50 FI-4:L32 Elastocaloric Microcooling
JINGYUAN XU1, N.S. AGHDAM1, YI-TING HSIAU1, KUN WANG1, L. BUMKE2, E. QUANDT2, M. KOHL1, 1Institute of Microstructure Technology, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; 2Institute for Materials Science, Kiel University (CAU), Kiel, Germany
12.10 FI-4:L33 Pyroelectric Energy Harvester Based on Commercial Lead-Free Multilayer Capacitors
A. HELT1,2, O. RAMÍREZ1, M. GERARD1, N. BOUSRI1, M. KHALIL1,2, E. DEFAY1,2, 1Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg; 2University of Luxembourg, Esch-sur-Alzette, Luxembourg
12.30 FI-4:L34 Cost-Effective Elastocaloric Cooling by Rubber-Based Microchannel Regenerators
KUN WANG, M. KOHL, JINGYUAN XU, Institute of Microstructure Technology, Karlsruhe Institute of Technology, KIT, Eggenstein-Leopoldshafen, Germany
WEDNESDAY JUNE 24 AFTERNOON
Room: SPOLETO A
Chair: Emmanuel DEFAY, Luxembourg
Session FI-4 Devices for solid state refrigeration, heat pumps and other energy related applications
14.30 FI-4:IL35 Gradient Materials Architectures for Efficient and Scalable Elastocaloric Cooling Systems
ICHIRO TAKEUCHI, Department of Materials Science and Engineering, University of Maryland, College Park, MD, USA
15.00 FI-4:L37 Polymer-based Electrocaloric Regenerators with Large Temperature Spans
O. RAMÍREZ, N. SAURABH, Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg; F. DOMINGUES DOS SANTOS, ARKEMA FRANCE SA, Colombes, France; S. MÖNCH, University of Stuttgart, Stuttgart, Germany; V. ZERILLO, KEMET ELECTRONICS ITALIA S.R.L., Sasso Marconi, Italy; E. DEFAY, Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg. University of Luxembourg, Esch-sur-Alzette, Luxembourg
15.20 Break
Chair: Franca ALBERTINI, Italy
15.50 FI-4:IL38 Thermomagnetic Energy Generation and Heat-Driven Elastocaloric Cooling at Miniature Scales
M. KOHL, Karlsruhe Institute of Technology, Karlsruhe, Germany
16.20 FI-4:IL39 From Lab to Life: Advancing Elastocaloric Heat Pumps for Real-World Sustainability
A. GRECO, Department of Industrial Engineering, University of Naples “Federico II”, Italy
16.50 FI-4:IL40 Additive Manufacturing of Magnetocaloric Regenerator: Material, Design, Processing and Performance
F. SCHEIBEL, S. GHORAI, O. GUTFLEISCH, Institute for Functional Materials TU Darmstadt, Darmstadt, Germany; D. ZENTGRAF, Institute for Production Management TU Darmstadt, Darmstadt, Germany; J-P. ZWICK, D. BENKE, MAGNOTHERM Solutions GmbH, Darmstadt, Germany
Room: SPOLETO A
Chair: Franca ALBERTINI, Italy (Convener)
14.25 Welcome
Session FI-1 Theory, simulation and modeling of caloric materials
14.30 FI-1:IL01 Caloric Behaviour near Critical and Tricritical Points
A. PLANES, E. MENDIVE-TAPIA, Departament de Física de la Matèria Condensada, Universitat de Barcelona, Barcelona, Catalonia
15.00 FI-1:IL02 Fundamental Properties of Compositionally Complex Heusler-Based Compounds: Insights from DFT and XAS
O. MIROSHKINA1, B. EGGERT1, B. BECKMANN2, J. LILL1, D. KOCH2, F. SCHEIBEL2, K. OLLEFS1, W. DONNER2, O. GUTFLEISCH2, H. WENDE1, M.E. GRUNER1, 1University of Duisburg-Essen, Duisburg, NRW, Germany; 2Technical University of Darmstadt, Darmstadt, Hessen, Germany
15.30 FI-1:IL03 Searching for New Magnetocaloric Materials—A High-Throughput Approach
R. MARTINHO VIEIRA, Uppsala University, Uppsala, Sweden; T. BJÖRKMAN, Åbo Akademi, Åbo, Finland; O. ERIKSSON, H.C. HERPER, Uppsala University, Uppsala, Sweden
16.00 Break
Chair: Antoni PLANES, Spain
16.30 FI-1:IL04 Stress-Induced Martensitic Transformation in Ni2MnGa Single Crystals
L. RIGHI, Department of Chemistry, Life Sciences and Environmental Sustainability, University of Parma, Parma, Italy
17.00 FI-1:L05 Modelling the Dynamics of the Martensitic Transformation in Ni2MnGa with Machine-learning Force-fields
M.E. GRUNER, University of Duisburg-Essen, Duisburg, Germany; M.J. BRUCKHOFF, University of Duisburg-Essen, Duisburg, Germany
17.20 FI-1:IL06 Ab initio Understanding of Large Caloric Effects around First-order Magnetic Phase Transitions with Low Hysteresis
E. MENDIVE TAPIA, Universitat de Barcelona, Barcelona, Spain; D. BOLDRIN, University of Glasgow, UK; WEI LIU, K. SKOKOV, O. GUTFLEISCH, TU Darmstadt, Germany
TUESDAY JUNE 23 MORNING
Room: SPOLETO A
Chair: Luana CARON, Germany
Session FI-2 Preparation and characterization of caloric materials
8.30 FI-2:IL07 Simultaneous Application of Pressure and Electric Field in Ferroelectric Materials
M. ZENG1, M. ROMANINI1, I. GORICAN2, S. DRNOVSEK2, H. URSIC2,3, A. SALVATORI1, M. BARRIO1, S. LOEHLE4, N. OBRECHT4, C. ESCORIHUELA-SAYALERO1, C. CAZORLA1, A. TORELLÓ1, P. LLOVERAS1, J.-L. TAMARIT1, 1Group of Characterization of Materials, Department of Physics and Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Catalonia, Spain; 2Electronic Ceramics Department, Jozef Stefan Institute, Ljubljana, Slovenia; 3Jozef Stefan International Postgraduate School, Ljubljana, Slovenia; 4TotalEnergies OneTech, Solaize, France
9.00 FI-2:IL08 Caloric Properties of Spin Crossover-Polymer Compounds
K. LÜNSER1,2,3, C. SALAZAR MEJÍA4, T. GOTTSCHALL4, E. KAVAK5, K. GÜRPINAR6, B. EMRE5, O. ATAKOL6, M. PORTA3, A. PLANES3, P. LLOVERAS7, J.-LL. TAMARIT7, E. STERN-TAULATS3, LL. MAÑOSA3, 1Institute for Energy and Materials Processes – Applied Quantum Materials, University Duisburg-Essen, Duisburg, Germany; 2Research Center Future Energy Materials and Systems (RC FEMS), University of Duisburg-Essen, Duisburg, Germany; 3Universitat de Barcelona, Barcelona, Catalonia, Spain; 4Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany; 5Department of Engineering Physics, Faculty of Engineering, Ankara University, Ankara, Turkey; 6Department of Chemistry, Faculty of Science, Ankara University, Ankara, Turkey; 7Universitat Politècnica de Catalunya, Barcelona, Catalonia, Spain
9.30 FI-2:IL10 Multifunctional High Entropy Alloys for Caloric Applications
V. FOURNÉE1, D. SIHOM KWEKAM1, G. LENGAIGNE1, J. LEDIEU1, J. VALENTIN1, P. BOULET1, S. MIGOT1, J. GHANBAJA1, S. SEMSARI PARAPARI2, S. ŠTURM2, S. FABBRICI3, F. CUGINI3,4, M. SOLZI3,4, F. ALBERTINI3, 1Institut Jean Lamour, CNRS-Université de Lorraine, Nancy, France; 2Jozef Stefan Institute, Department for Nanostructured Materials, Ljubljana, Slovenia; 3Institute of Materials for Electronics and Magnetism (IMEM), CNR, Parma, Italy; 4Department of Physics, University of Parma, Parma, Italy
10.00 Break
Chair: Elena VILLA, Italy
10.30 FI-2:IL11 High Pressure Characterization of the Magnetoelastic Phase Transitions in Magnetocaloric Materials
L. CARON, Department of Physics, Bielefeld University, Bielefeld, Germany & Helmholtz-Zentrum Berlin für Materialien und Energie, Berlin, Germany
11.00 FI-2:IL12 Bulk Ceramics and Thick Films for Caloric Applications
H. URŠIČ1,2, M. D’ANGELO1, V. REGIS1,2, I. GORIČAN1,2, 1Electronic Ceramics Department, Jožef Stefan Institute, Ljubljana, Slovenia; 2Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
11.30 FI-2:L13 Development of Copper Based Shape Memory Alloy for Elastocaloric Cooling Applications
JUN CUI, Department of Materials Science and Engineering, Iowa State University, Ames, IA, USA
11.50 FI-2:L14 Exploring the Elastocaloric Potential of NiMnTi Alloys
F. VILLA1,2, E. BESTETTI1, ZEJUN DENG2, L. RIGHI3, D. SALAZAR4, N. BENNATO1, F. PASSARETTI1, R. CASATI2, E. VILLA1, 1CNR ICMATE, Lecco Unit, Lecco, Italy; 2Politecnico di Milano, Milano, Italy; 3Università di Parma, Parma, Italy; 4BCMaterials, Leioa, Spain
12.10 FI-2:L15 Revealing Complex Magnetic Interactions in Fe2P-based Compounds: A Study using Mössbauer Spectroscopy and Neutron Diffraction
K.K. THILAKAN, S. GHORAI, WEI LIU, L. HÄGGSTRÖM, F. LINDGREN, V. POMJAKUSHIN, P. BERAN, O. GUTFLEISCH, P. SVEDLINDH, J. CEDERVALL, Department of Chemistry - Ångström Laboratory, Uppsala University, Uppsala, Sweden Institute of Materials Science, Technical University of Darmstadt, Darmstadt, Germany; Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden; Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institut, Villigen, Switzerland; European Spallation Source ESS ERIC, Lund, Sweden Nuclear Physics Institute, ASCR, Rez, Czech Republic; Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
TUESDAY JUNE 23 AFTERNOON
Room: SPOLETO A
Chair: Lluis MANOSA, Spain
Session FI-2 Preparation and characterization of caloric materials
15.00 FI-3:IL25 Multicaloric Materials in Pulsed Magnetic Fields
T. GOTTSCHALL, T. NIEHOFF, E. BYKOV, M. STRASSHEIM, C. SALAZAR-MEJIA, J. WOSNITZA, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
15.30 FI-2:IL18 Multi-caloric Cooling for Room Temperature and Cryo-applications
O. GUTFLEISCH, A. AUBERT, A. DÖRING, B. BECKMANN, F. SCHEIBEL, WEI LIU, S. GHORAI, K. SKOKOV, TU Darmstadt, Functional Materials, Darmstadt, Germany
16.00 FI-2:L19 Fabrication of Pb(Sc0.5Ta0.5)O3 Thick Films by Powder Aerosol Deposition
M. D’ANGELO1, V. REGIS1,2, I. GORIČAN1,2, S. DRNOVŠEK1, H. URŠIČ1,2, 1Electronic Ceramics Department, Jožef Stefan Institute, Ljubljana, Slovenia; 2Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
16.20 Break
Chair: Oliver GUTFLEISCH, Germany
Session FI-3 Functional characterization of caloric materials
16.50 FI-3:IL20 New Versatile Instruments to Measure Element-specific and Macroscopic Hysteresis at ID12 of the ESRF
A. AUBERT, Functional Materials, TU Darmstadt, Darmstadt, Germany
17.20 FI-3:IL21 Recent Developments in Magnetocaloric Measurements
F. CUGINI1,2, G. GARULLI1, M. SOLZI1,2, 1University of Parma, Parma, Italy, 2IMEM-CNR Institute, Italy
17.50 FI-3:L22 Mechanocaloric Effects in Spin Crossover Complexes subjected to Uniaxial Load and Hydrostatic Pressure
L. MAÑOSA, E. STERN-TAULATS, A. PLANES, M. PORTA, E. VIVES, Universitat de Barcelona, Barcelona, Catalonia; K. GURPINAR, S. BOZUKS, E. KAVAK, B. EMRE, O. ATAKOL, Ankara University. Ankara, Turkey; K. LÜNSER, Universität Duisburg-Essen, Duisburg, Germany; A. SALVATORI, P. LLOVERAS, J.L. TAMARIT, Universitat Politècnica de Catalunya, Barcelona, Catalonia
18.10 FI-3:L23 Dynamics of the Phase Transformation in a Giant Magnetocaloric Material along T- and B-scans
F. GUILLOU, F. VEILLON, V. HARDY, Normandie University, ENSICAEN, UNICAEN, CNRS, CRISMAT, France; B. HUHE, Inner Mongolia Normal University, China
WEDNESDAY JUNE 24 MORNING
Room: SPOLETO A
Chair: Tino GOTTSCHALL, Germany
Session FI-3 Functional characterization of caloric materials
8.30 FI-2:IL16 Additive Manufacturing of Magnetocaloric and Thermomagnetic Materials via Polymer based Composite Filaments
V. FRANCO, Multidisciplinary Unit for Energy Science, University of Seville, Seville, Spain
9.00 FI-3:L26 NiMnGa-based Multicaloric Alloys: Experimental Investigation in Magneto-mechanical Coupling
E. VILLA, F. VILLA, E. BESTETTI, F. PASSARETTI, C. TOMASI, E. BASSANI, N. BENNATO, CNR ICMATE Lecco Unit, Lecco, Italy; CNR ICMATE Genova Unit, Genova, Italy
9.20 FI-3:L27 Beyond the Single-Phase Paradigm: Third-Generation High-Entropy Alloys with Enhanced Magnetocaloric Properties
JIA YAN LAW1, L. HAN2, D. RAABE2, O. GUTFLEISCH3, V. FRANCO1, 1Multidisciplinary Unit for Energy Science, University of Seville, Spain; 2Max Planck Institute for Sustainable Materials, Düsseldorf, Germany; 3Department of Materials Science, Technical University of Darmstadt, Darmstadt, Germany
9.40 FI-3:L28 In-Operando Comparison of Tailored Full-Heuslers with First- and Second-Order Transitions for Low-Grade Waste Heat Harvesting
E. RUSCONI, L. GALLO, S. FABBRICI, G. TREVISI, F. ALBERTINI, IMEM-CNR, Parma, Italy; F. CUGINI, M. SOLZI, Department of mathematical, physical and computer sciences of the University of Parma, Parma, Italy
10.00 Break
Chair: Ichiro TAKEUCHI, USA
Session FI-4 Devices for solid state refrigeration, heat pumps and other energy related applications
10.30 FI-4:IL29 Electrocaloric Cooling Devices
E. DEFAY, Luxembourg Institute of Science and Technology, Esch sur Alzette, Luxembourg
11.00 FI-4:IL30 Digital Twin Driven Design and Modelling of Next-generation Thermomagnetic Generators with Optimized Efficiency
A. IZADI1,2, S. FÄHLER1, 1Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany; 2Faculty of Mechanical Science and Engineering, TUD Dresden University of Technology, Dresden, Germany
11.30 FI-4:L31 Impact of Rotor Design on Heat Exchange Efficiency for Thermomagnetic Rotary Generators
L. GALLO, S. FABBRICI, F. ALBERTINI, IMEM-CNR, Parma, Italy; F. CUGINI, G. GARULLI, M. SOLZI, University of Parma, Parma, Italy; J.Y. LAW, V. FRANCO, University of Sevilla, Sevilla, Spain
11.50 FI-4:L32 Elastocaloric Microcooling
JINGYUAN XU1, N.S. AGHDAM1, YI-TING HSIAU1, KUN WANG1, L. BUMKE2, E. QUANDT2, M. KOHL1, 1Institute of Microstructure Technology, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; 2Institute for Materials Science, Kiel University (CAU), Kiel, Germany
12.10 FI-4:L33 Pyroelectric Energy Harvester Based on Commercial Lead-Free Multilayer Capacitors
A. HELT1,2, O. RAMÍREZ1, M. GERARD1, N. BOUSRI1, M. KHALIL1,2, E. DEFAY1,2, 1Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg; 2University of Luxembourg, Esch-sur-Alzette, Luxembourg
12.30 FI-4:L34 Cost-Effective Elastocaloric Cooling by Rubber-Based Microchannel Regenerators
KUN WANG, M. KOHL, JINGYUAN XU, Institute of Microstructure Technology, Karlsruhe Institute of Technology, KIT, Eggenstein-Leopoldshafen, Germany
WEDNESDAY JUNE 24 AFTERNOON
Room: SPOLETO A
Chair: Emmanuel DEFAY, Luxembourg
Session FI-4 Devices for solid state refrigeration, heat pumps and other energy related applications
14.30 FI-4:IL35 Gradient Materials Architectures for Efficient and Scalable Elastocaloric Cooling Systems
ICHIRO TAKEUCHI, Department of Materials Science and Engineering, University of Maryland, College Park, MD, USA
15.00 FI-4:L37 Polymer-based Electrocaloric Regenerators with Large Temperature Spans
O. RAMÍREZ, N. SAURABH, Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg; F. DOMINGUES DOS SANTOS, ARKEMA FRANCE SA, Colombes, France; S. MÖNCH, University of Stuttgart, Stuttgart, Germany; V. ZERILLO, KEMET ELECTRONICS ITALIA S.R.L., Sasso Marconi, Italy; E. DEFAY, Luxembourg Institute of Science and Technology, Esch-sur-Alzette, Luxembourg. University of Luxembourg, Esch-sur-Alzette, Luxembourg
15.20 Break
Chair: Franca ALBERTINI, Italy
15.50 FI-4:IL38 Thermomagnetic Energy Generation and Heat-Driven Elastocaloric Cooling at Miniature Scales
M. KOHL, Karlsruhe Institute of Technology, Karlsruhe, Germany
16.20 FI-4:IL39 From Lab to Life: Advancing Elastocaloric Heat Pumps for Real-World Sustainability
A. GRECO, Department of Industrial Engineering, University of Naples “Federico II”, Italy
16.50 FI-4:IL40 Additive Manufacturing of Magnetocaloric Regenerator: Material, Design, Processing and Performance
F. SCHEIBEL, S. GHORAI, O. GUTFLEISCH, Institute for Functional Materials TU Darmstadt, Darmstadt, Germany; D. ZENTGRAF, Institute for Production Management TU Darmstadt, Darmstadt, Germany; J-P. ZWICK, D. BENKE, MAGNOTHERM Solutions GmbH, Darmstadt, Germany