Symposium CN
Science and Technology for Silicate Ceramics
TUESDAY JUNE 16 AFTERNOON
Room: MONTEFALCO
Chair: Chiara MOLINARI, ITALY (Convener)
16.25 Welcome
16.30 CN-1:IL01 Lowering the Firing Temperature of Ceramic Bricks through the Incorporation of Biomass Fly Ash: Physical, Mechanical, and Microstructural Insights
P. MUÑOZ, M. VIDAC-VASIC, C. GONZÁLEZ-MENORCA, O. GENCEL, Universidad Internacional de La Rioja, Logroño, Spain
17.00 CN-1:IL02 The Influence of Water-Soluble Fluxing Agents and their Application Method on the Sintering Temperature and Properties of Ceramic Materials
E. KŁOSEK-WAWRZYN, A. FLORKOWSKA, A. KOCOŁ, AGH University of Krakow, Krakow, Poland
17.30 CN-1:IL03 Sustainability in the Ceramic Tile Industry: Necessity, Constraints and Opportunities
S. CONTE1, C. MOLINARI1, R. ARLETTI2, A. GUALTIERI F. 2, C. ZANELLI1, 1Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici (CNR- ISSMC), Faenza (RA), Italy; 2Dipartimento di Scienze Chimiche e Geologiche – Università degli Studi di Modena e Reggio Emilia, Italy
WEDNESDAY JUNE 17 AFTERNOON
Room: MONTEFALCO
Chair: Pedro MUNOZ, Spain
14.30 CN-1:IL04 New Alkaline-activated Materials from Waste for a Circular Economy
L. PÉREZ-VILLAREJO, S. BUENO-RODRÍGUEZA, D. ELICHE-QUESADA, Dept of Chemical, Environmental, and Materials Eng., Higher Polytechnic School of Jaén, University of Jaén, Campus Jaén, Spain; and Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
15.00 CN-1:IL05 The “Yellow Cobblestones” of Sofia - an Intriguing Marl Ceramic Clinker with Outstanding Characteristics
A. KARAMANOV1, E. KARAMANOVA1, V. KOSTOV-KYTIN2, 1Institute of Physical Chemistry “Rostislaw Kaischew” Bulgarian Academy of Sciences, Sofia, Bulgaria; 2Institute of Mineralogy and Crystallography “Acad. Ivan Kostov” Bulgarian Academy of Sciences, Bulgaria
15.30 CN-1:L06 Recycled Geomaterials Mimicking Natural Raw Materials: A Sustainable Opportunity for the Ceramic Sector
S.F. GRAZIANO1, P. CAPPELLETTI2, M. DONDI3, C. MOLINARI3, C. RISPOLI2, C. ZANELLI3, 1Dipartimento di Farmacia, Università degli Studi di Napoli Federico II, Napoli, Italy; 2Dipartimento di Scienze della Terra dell’Ambiente e delle Risorse, Università degli Studi di Napoli Federico II, Napoli, Italy; 3CNR-ISSMC Ist. Scienza, Tecnologia e Sostenibilità per lo sviluppo dei Materiali Ceramici, Faenza, Italy
15.50 Break
Chair: Servet TURAN, Turkey
16.20 CN-1:L07 Studies on Sustainable Manufacturing of Ceramic Table-wares through Wet Processed Soda Feldspar
C. AGARWAL1, L.K. SHARMA2, 1Mactus Mineral LLC, Dubai, UAE; 2Mahamana Ceramic Development Organization, Khurja, India
16.40 CN-1:IL08 Elaboration of Low-energy Consuming Materials
G.L. LECOMTE-NANA, IRCER (UMR CNRS 7315), ENSIL-ENSCI, University of Limoges, Limoges, France
17.10 CN-1:L09 Effects of Raw Material Changes on the Composition and Mechanical Behaviour of Porcelain Stoneware Tiles
M. SISTI, A.F. GUALTIERI, R. ARLETTI, University of Modena and Reggio Emilia, Modena, Italy; W. PABST, E. GREGOROVÁ, P. ŠIMONOVÁ, University of Chemistry and Technology Prague, Prague, Czech Republic
17.30 CN-3:IL25 Ceramic Additive Manufacturing in 2025: Market Reality, Technical Maturity, and the Road to Scaled Adoption
M.P. GOMEZ-TENA, ITC-AICE, Castellon, Spain
(rescheduled at the request of the Presenting Author)
THURSDAY JUNE 18 MORNING
Room: MONTEFALCO
Chair: Katarzyna PASIUT, Poland
9.00 CN-2:IL11 Synthesis and Characterization of Lithium Aluminium Silicate-containing Materials
O.R.K. MONTEDO1, J.M. INOCENTE1, R. MORENO2, S. ARCARO1, 1Laboratório de Cerâmica Técnica (CerTec), Programa de Pós-graduação em Ciência e Engenharia de Materiais (PPGGEM), Universidade do Extremo Sul Catarinense (UNESC), Criciúma (SC), Brazil; 2Institute of Ceramics & Glass, CSIC, Madrid, Spain
9.30 CN-2:L13 A Comprehensive View of Mullite Formation in Porcelain
W. CARTY, HYOJIN LEE, New York State College of Ceramics at Alfred University, Alfred, NY, USA
9.50 CN-2:L14 Eco-friendly Precipitation Synthesis of Egyptian Blue (CaCuSi4O10) pigment
Z.A. HOVHANNISYAN, A.R. ISAHAKYAN, A.M. TERZYAN, I.A. PETROSYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
10.10 Break
Chair: William CARTY, USA
10.40 CN-2:IL15 Non-invasive Characterization of Experimental Ceramics and Tiles Unearthed at the İznik Tile Kilns Excavation
G. ŞİMŞEK FRANCİ, Department of Metallurgical and Materials Engineering, Istanbul Gedik University, Istanbul, Türkiye
11.10 CN-2:IL16 ZnO, SrO, BaO, their Role and Influence on the Structure and Properties of Ceramic Glazes
K. PASIUT, J. PARTYKA, D. KOZIEN, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractory Materials, Krakow, Poland
11.40 CN-2:L18 A Borax- and Fluoride-Free Precipitation Approach of Victoria Green Pigment
A.A. KIRAKOSYAN, A.R. ISAHAKYAN, A.M. TERZYAN, V.G. STEPANYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
12.00 CN-2:IL19 Ultrafast Development of Blue Pigment for In Situ Laserdigital Coloration in the Ceramic Industry
J.B. CARDA, A. LAHLAHI-ATTALHAOUI, J. GONZÁLEZ CUADRA, S. PORCAR GARCÍA, S. LUIS TOCA, Universitat Jaume I, Castellon, Spain
FRIDAY JUNE 19 AFTERNOON
Room: MONTEFALCO
Chair: Alexander KARAMANOV, Bulgaria
14.30 CN-3:L21 Comparison of Porcelain Stoneware Tiles Fired in Traditional, Hydrogen and Electric Kilns
G. OREFICE1, B. FERRARI1, M.C. BIGNOZZI2, E. FRANZONI1,2, 1Centro Ceramico, Sassuolo (MO), Italy; 2Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, University of Bologna, Bologna, Italy
14.50 CN-3:L22 Direct Ink Writing of Porous Clay-Based Ceramics
I.Q. MAURY NJOYA1, E. JUSTE2, F. CASARRUBOIS3, G.L. LECOMTE-NANA1, S. ABDELOUHAB2, C. DELMOTTE2, M. GONON3, Y. EL HAFIANE1, C. PEYRATOUT1, 1Institute of Research for Ceramics IRCER UMR CNRS 7315, Limoges, France; 2Belgian Ceramic Research Centre BCRC, Mons, Belgium; 3Materials Institute, University of Mons, Mons, Belgium
15.10 CN-3:IL23 Additive Manufacturing of Glass Materials using Powder Bed-based Processes
E. JUSTE, C. KERMEL, F. PETIT, Belgian Ceramic Research Centre, Mons, Belgium
Room: MONTEFALCO
Chair: Chiara MOLINARI, ITALY (Convener)
16.25 Welcome
16.30 CN-1:IL01 Lowering the Firing Temperature of Ceramic Bricks through the Incorporation of Biomass Fly Ash: Physical, Mechanical, and Microstructural Insights
P. MUÑOZ, M. VIDAC-VASIC, C. GONZÁLEZ-MENORCA, O. GENCEL, Universidad Internacional de La Rioja, Logroño, Spain
17.00 CN-1:IL02 The Influence of Water-Soluble Fluxing Agents and their Application Method on the Sintering Temperature and Properties of Ceramic Materials
E. KŁOSEK-WAWRZYN, A. FLORKOWSKA, A. KOCOŁ, AGH University of Krakow, Krakow, Poland
17.30 CN-1:IL03 Sustainability in the Ceramic Tile Industry: Necessity, Constraints and Opportunities
S. CONTE1, C. MOLINARI1, R. ARLETTI2, A. GUALTIERI F. 2, C. ZANELLI1, 1Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici (CNR- ISSMC), Faenza (RA), Italy; 2Dipartimento di Scienze Chimiche e Geologiche – Università degli Studi di Modena e Reggio Emilia, Italy
WEDNESDAY JUNE 17 AFTERNOON
Room: MONTEFALCO
Chair: Pedro MUNOZ, Spain
14.30 CN-1:IL04 New Alkaline-activated Materials from Waste for a Circular Economy
L. PÉREZ-VILLAREJO, S. BUENO-RODRÍGUEZA, D. ELICHE-QUESADA, Dept of Chemical, Environmental, and Materials Eng., Higher Polytechnic School of Jaén, University of Jaén, Campus Jaén, Spain; and Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
15.00 CN-1:IL05 The “Yellow Cobblestones” of Sofia - an Intriguing Marl Ceramic Clinker with Outstanding Characteristics
A. KARAMANOV1, E. KARAMANOVA1, V. KOSTOV-KYTIN2, 1Institute of Physical Chemistry “Rostislaw Kaischew” Bulgarian Academy of Sciences, Sofia, Bulgaria; 2Institute of Mineralogy and Crystallography “Acad. Ivan Kostov” Bulgarian Academy of Sciences, Bulgaria
15.30 CN-1:L06 Recycled Geomaterials Mimicking Natural Raw Materials: A Sustainable Opportunity for the Ceramic Sector
S.F. GRAZIANO1, P. CAPPELLETTI2, M. DONDI3, C. MOLINARI3, C. RISPOLI2, C. ZANELLI3, 1Dipartimento di Farmacia, Università degli Studi di Napoli Federico II, Napoli, Italy; 2Dipartimento di Scienze della Terra dell’Ambiente e delle Risorse, Università degli Studi di Napoli Federico II, Napoli, Italy; 3CNR-ISSMC Ist. Scienza, Tecnologia e Sostenibilità per lo sviluppo dei Materiali Ceramici, Faenza, Italy
15.50 Break
Chair: Servet TURAN, Turkey
16.20 CN-1:L07 Studies on Sustainable Manufacturing of Ceramic Table-wares through Wet Processed Soda Feldspar
C. AGARWAL1, L.K. SHARMA2, 1Mactus Mineral LLC, Dubai, UAE; 2Mahamana Ceramic Development Organization, Khurja, India
16.40 CN-1:IL08 Elaboration of Low-energy Consuming Materials
G.L. LECOMTE-NANA, IRCER (UMR CNRS 7315), ENSIL-ENSCI, University of Limoges, Limoges, France
17.10 CN-1:L09 Effects of Raw Material Changes on the Composition and Mechanical Behaviour of Porcelain Stoneware Tiles
M. SISTI, A.F. GUALTIERI, R. ARLETTI, University of Modena and Reggio Emilia, Modena, Italy; W. PABST, E. GREGOROVÁ, P. ŠIMONOVÁ, University of Chemistry and Technology Prague, Prague, Czech Republic
17.30 CN-3:IL25 Ceramic Additive Manufacturing in 2025: Market Reality, Technical Maturity, and the Road to Scaled Adoption
M.P. GOMEZ-TENA, ITC-AICE, Castellon, Spain
(rescheduled at the request of the Presenting Author)
THURSDAY JUNE 18 MORNING
Room: MONTEFALCO
Chair: Katarzyna PASIUT, Poland
9.00 CN-2:IL11 Synthesis and Characterization of Lithium Aluminium Silicate-containing Materials
O.R.K. MONTEDO1, J.M. INOCENTE1, R. MORENO2, S. ARCARO1, 1Laboratório de Cerâmica Técnica (CerTec), Programa de Pós-graduação em Ciência e Engenharia de Materiais (PPGGEM), Universidade do Extremo Sul Catarinense (UNESC), Criciúma (SC), Brazil; 2Institute of Ceramics & Glass, CSIC, Madrid, Spain
9.30 CN-2:L13 A Comprehensive View of Mullite Formation in Porcelain
W. CARTY, HYOJIN LEE, New York State College of Ceramics at Alfred University, Alfred, NY, USA
9.50 CN-2:L14 Eco-friendly Precipitation Synthesis of Egyptian Blue (CaCuSi4O10) pigment
Z.A. HOVHANNISYAN, A.R. ISAHAKYAN, A.M. TERZYAN, I.A. PETROSYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
10.10 Break
Chair: William CARTY, USA
10.40 CN-2:IL15 Non-invasive Characterization of Experimental Ceramics and Tiles Unearthed at the İznik Tile Kilns Excavation
G. ŞİMŞEK FRANCİ, Department of Metallurgical and Materials Engineering, Istanbul Gedik University, Istanbul, Türkiye
11.10 CN-2:IL16 ZnO, SrO, BaO, their Role and Influence on the Structure and Properties of Ceramic Glazes
K. PASIUT, J. PARTYKA, D. KOZIEN, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractory Materials, Krakow, Poland
11.40 CN-2:L18 A Borax- and Fluoride-Free Precipitation Approach of Victoria Green Pigment
A.A. KIRAKOSYAN, A.R. ISAHAKYAN, A.M. TERZYAN, V.G. STEPANYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
12.00 CN-2:IL19 Ultrafast Development of Blue Pigment for In Situ Laserdigital Coloration in the Ceramic Industry
J.B. CARDA, A. LAHLAHI-ATTALHAOUI, J. GONZÁLEZ CUADRA, S. PORCAR GARCÍA, S. LUIS TOCA, Universitat Jaume I, Castellon, Spain
FRIDAY JUNE 19 AFTERNOON
Room: MONTEFALCO
Chair: Alexander KARAMANOV, Bulgaria
14.30 CN-3:L21 Comparison of Porcelain Stoneware Tiles Fired in Traditional, Hydrogen and Electric Kilns
G. OREFICE1, B. FERRARI1, M.C. BIGNOZZI2, E. FRANZONI1,2, 1Centro Ceramico, Sassuolo (MO), Italy; 2Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, University of Bologna, Bologna, Italy
14.50 CN-3:L22 Direct Ink Writing of Porous Clay-Based Ceramics
I.Q. MAURY NJOYA1, E. JUSTE2, F. CASARRUBOIS3, G.L. LECOMTE-NANA1, S. ABDELOUHAB2, C. DELMOTTE2, M. GONON3, Y. EL HAFIANE1, C. PEYRATOUT1, 1Institute of Research for Ceramics IRCER UMR CNRS 7315, Limoges, France; 2Belgian Ceramic Research Centre BCRC, Mons, Belgium; 3Materials Institute, University of Mons, Mons, Belgium
15.10 CN-3:IL23 Additive Manufacturing of Glass Materials using Powder Bed-based Processes
E. JUSTE, C. KERMEL, F. PETIT, Belgian Ceramic Research Centre, Mons, Belgium