Symposium CN
Session CN-1 Green and sustainable silicate ceramics
CN-1:IL01 Lowering the Firing Temperature of Ceramic Bricks through the Incorporation of Biomass Fly Ash: Physical, Mechanical, and Microstructural Insights
P. MUÑOZ, M. VIDAC-VASIC, C. GONZÁLEZ-MENORCA, O. GENCEL, Universidad Internacional de La Rioja, Logroño, Spain
CN-1:IL02 The Influence of Water-Soluble Fluxing Agents and their Application Method on the Sintering Temperature and Properties of Ceramic Materials
E. KŁOSEK-WAWRZYN, A. FLORKOWSKA, A. KOCOŁ, AGH University of Krakow, Krakow, Poland
CN-1:IL03 Sustainability in the Ceramic Tile Industry: Necessity, Constraints and Opportunities
S. CONTE1, C. MOLINARI1, R. ARLETTI2, A. GUALTIERI F. 2, C. ZANELLI1, 1Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici (CNR- ISSMC), Faenza (RA), Italy; 2Dipartimento di Scienze Chimiche e Geologiche – Università degli Studi di Modena e Reggio Emilia, Italy
CN-1:IL04 New Alkaline-activated Materials from Waste for a Circular Economy
L. PÉREZ-VILLAREJO, S. BUENO-RODRÍGUEZA, D. ELICHE-QUESADA, Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Campus Jaén, Spain; and Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
CN-1:IL05 The “Yellow Cobblestones” of Sofia - an Intriguing Marl Ceramic Clinker with Outstanding Characteristics
A. KARAMANOV1, E. KARAMANOVA1, V. KOSTOV-KYTIN2, 1Institute of Physical Chemistry “Rostislaw Kaischew” Bulgarian Academy of Sciences, Sofia, Bulgaria; 2Institute of Mineralogy and Crystallography "Acad. Ivan Kostov" Bulgarian Academy of Sciences, Bulgaria
CN-1:L06 Recycled Geomaterials Mimicking Natural Raw Materials: A Sustainable Opportunity for the Ceramic Sector
S.F. GRAZIANO1, P. CAPPELLETTI2, M. DONDI3, C. MOLINARI3, C. RISPOLI2, C. ZANELLI3, 1Dipartimento di Farmacia - Università degli Studi di Napoli Federico II, Napoli, Italy; 2Dipartimento di Scienze della Terra dell'Ambiente e delle Risorse - Università degli Studi di Napoli Federico II, Napoli, Italy; 3CNR-ISSMC Istituto di Scienza, Tecnologia e Sostenibilità per lo sviluppo dei Materiali Ceramici – Faenza, Italy
CN-1:L07 Studies on Sustainable Manufacturing of Ceramic Table-wares through Wet Processed Soda Feldspar
C. AGARWAL1, L.K. SHARMA2, 1Mactus Mineral LLC, Dubai, UAE; 2Mahamana Ceramic Development Organization, Khurja, India
CN-1:IL08 Elaboration of Low-energy Consuming Materials
G.L. LECOMTE-NANA, IRCER (UMR CNRS 7315), ENSIL-ENSCI, University of Limoges, Limoges, France
CN-1:L09 Effects of Raw Material Changes on the Composition and Mechanical Behaviour of Porcelain Stoneware Tiles
M. SISTI, A.F. GUALTIERI, R. ARLETTI, University of Modena and Reggio Emilia, Modena, Italy; W. PABST, E. GREGOROVÁ, P. ŠIMONOVÁ, University of Chemistry and Technology Prague, Prague, Czech Republic
CN-1:L10 Study on the Incorporation of Fly Ash as Secondary Material in the Formulation of Conventional Refractory Castable to Increase the Percentage of Recycled Waste and Achieve Sustainable Development
J.F. LÓPEZ PERALES, L. DÍAZ-TATO, S.U. COSTILLA-AGUILAR, F. BANDA-MUÑOZ, E.A. RODRÍGUEZ, Universidad Autónoma de Nuevo León (UANL), Facultad de Ingeniería Mecánica y Eléctrica (FIME), Programa Doctoral en Ingeniería de Materiales, San Nicolás de los Garza, Nuevo León, México
Session CN-2 Glasses, glazes and pigments
CN-2:IL11 Synthesis and Characterization of Lithium Aluminium Silicate-containing Materials
O.R.K. MONTEDO1, J.M. INOCENTE1, R. MORENO2, S. ARCARO1, 1 Laboratório de Cerâmica Técnica (CerTec), Programa de Pós-graduação em Ciência e Engenharia de Materiais (PPGGEM), Universidade do Extremo Sul Catarinense (UNESC), Criciúma (SC), Brazil; 2Institute of Ceramics & Glass, CSIC, Madrid, Spain
CN-2:IL12 Development of Sustainable Glazes for Stoneware Products
M.P. SEABRA, M.N. CAPELA, I. VILARINHO, I. VIEIRA, CICECO – Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal; J. CARNEIRO, Grestel - Produtos Cerâmicos S.A, Vagos, Portugal
CN-2:L13 A Comprehensive View of Mullite Formation in Porcelain
W. CARTY, HYOJIN LEE, New York State College of Ceramics at Alfred University, Alfred, NY, USA
CN-2:L14 Eco-friendly Precipitation Synthesis of Egyptian Blue (CaCuSi4O10) pigment
Z.A. HOVHANNISYAN, A.R. ISAHAKYAN, A.M. TERZYAN, I.A. PETROSYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
CN-2:IL15 Non-invasive Characterization of Experimental Ceramics and Tiles Unearthed at the İznik Tile Kilns Excavation
G. ŞİMŞEK FRANCİ, Department of Metallurgical and Materials Engineering, Istanbul Gedik University, Istanbul, Türkiye
CN-2:IL16 ZnO, SrO, BaO, their Role and Influence on the Structure and Properties of Ceramic Glazes
K. PASIUT, J. PARTYKA, D. KOZIEŃ, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractory Materials, Krakow, Poland
CN-2:IL17 Development of Willemite Crystals on Stoneware Glaze
L.K. SHARMA, Mahamana Ceramic Development Organization, Khurja, India
CN-2:L18 A Borax- and Fluoride-Free Precipitation Approach of Victoria Green Pigment
A.A. KIRAKOSYAN, A.R. ISAHAKYAN, A.M. TERZYAN, V.G. STEPANYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
CN-2:IL19 Ultrafast Development of Blue Pigment for In Situ Laserdigital Coloration in the Ceramic Industry
J.B. CARDA, A. LAHLAHI-ATTALHAOUI, J. GONZÁLEZ CUADRA, S. PORCAR GARCÍA, S. LUIS TOCA, Universitat Jaume I, Castellon, Spain
CN-2:IL20 High Solar Reflectance Ceramic Tiles Incorporating Secondary Raw Materials for Sustainable Architectural Heritage Renovation
E.I. CEDILLO-GONZÁLEZ, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy and National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy; D. CASOTTI, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy; T. GEORGIADIS, L. CREMONINI, D. FAMULARI, Institute for the BioEconomy CNR, Bologna, Italy; S. BANDINI, CERTIMAC, Faenza, Italy; C. SILIGARDI, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy and National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy
Session CN-3 Innovative processing
CN-3:L21 Comparison of Porcelain Stoneware Tiles Fired in Traditional, Hydrogen and Electric Kilns
G. OREFICE1, B. FERRARI1, M.C. BIGNOZZI2, E. FRANZONI1,2, 1Centro Ceramico, Sassuolo (MO), Italy; 2Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, University of Bologna, Bologna, Italy
CN-3:L22 Direct Ink Writing of Porous Clay-Based Ceramics
I.Q. MAURY NJOYA1, E. JUSTE2, F. CASARRUBOIS3, G.L. LECOMTE-NANA1, S. ABDELOUHAB2, C. DELMOTTE2, M. GONON3, Y. EL HAFIANE1, C. PEYRATOUT1, 1Institute of Research for Ceramics IRCER UMR CNRS 7315, Limoges, France; 2Belgian Ceramic Research Centre BCRC, Mons, Belgium; 3Materials Institute, University of Mons, Mons, Belgium
CN-3:IL23 Additive Manufacturing of Glass Materials using Powder Bed-based Processes
E. JUSTE, C. KERMEL, F. PETIT, Belgian Ceramic Research Centre, Mons, Belgium
CN-3:IL24 Powder Granulation in Ceramic Tile Production: Progress and Challenges
C. ZANELLI1, S. CONTE1, C. MOLINARI1, M. DONDI1, F. MARANI2, 1CNR-ISSMC Istituto di Scienza, Tecnologia e Sostenibilità per lo sviluppo dei Materiali Ceramici, Faenza, Italy; 2LB Officine Meccaniche S.p.A., Fiorano Modenese (MO), Italy
CN-3:IL25 Ceramic Additive Manufacturing in 2025: Market Reality, Technical Maturity, and the Road to Scaled Adoption
M.P. GOMEZ-TENA, ITC-AICE, Castellon, Spain
CN-1:IL01 Lowering the Firing Temperature of Ceramic Bricks through the Incorporation of Biomass Fly Ash: Physical, Mechanical, and Microstructural Insights
P. MUÑOZ, M. VIDAC-VASIC, C. GONZÁLEZ-MENORCA, O. GENCEL, Universidad Internacional de La Rioja, Logroño, Spain
CN-1:IL02 The Influence of Water-Soluble Fluxing Agents and their Application Method on the Sintering Temperature and Properties of Ceramic Materials
E. KŁOSEK-WAWRZYN, A. FLORKOWSKA, A. KOCOŁ, AGH University of Krakow, Krakow, Poland
CN-1:IL03 Sustainability in the Ceramic Tile Industry: Necessity, Constraints and Opportunities
S. CONTE1, C. MOLINARI1, R. ARLETTI2, A. GUALTIERI F. 2, C. ZANELLI1, 1Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici (CNR- ISSMC), Faenza (RA), Italy; 2Dipartimento di Scienze Chimiche e Geologiche – Università degli Studi di Modena e Reggio Emilia, Italy
CN-1:IL04 New Alkaline-activated Materials from Waste for a Circular Economy
L. PÉREZ-VILLAREJO, S. BUENO-RODRÍGUEZA, D. ELICHE-QUESADA, Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Campus Jaén, Spain; and Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
CN-1:IL05 The “Yellow Cobblestones” of Sofia - an Intriguing Marl Ceramic Clinker with Outstanding Characteristics
A. KARAMANOV1, E. KARAMANOVA1, V. KOSTOV-KYTIN2, 1Institute of Physical Chemistry “Rostislaw Kaischew” Bulgarian Academy of Sciences, Sofia, Bulgaria; 2Institute of Mineralogy and Crystallography "Acad. Ivan Kostov" Bulgarian Academy of Sciences, Bulgaria
CN-1:L06 Recycled Geomaterials Mimicking Natural Raw Materials: A Sustainable Opportunity for the Ceramic Sector
S.F. GRAZIANO1, P. CAPPELLETTI2, M. DONDI3, C. MOLINARI3, C. RISPOLI2, C. ZANELLI3, 1Dipartimento di Farmacia - Università degli Studi di Napoli Federico II, Napoli, Italy; 2Dipartimento di Scienze della Terra dell'Ambiente e delle Risorse - Università degli Studi di Napoli Federico II, Napoli, Italy; 3CNR-ISSMC Istituto di Scienza, Tecnologia e Sostenibilità per lo sviluppo dei Materiali Ceramici – Faenza, Italy
CN-1:L07 Studies on Sustainable Manufacturing of Ceramic Table-wares through Wet Processed Soda Feldspar
C. AGARWAL1, L.K. SHARMA2, 1Mactus Mineral LLC, Dubai, UAE; 2Mahamana Ceramic Development Organization, Khurja, India
CN-1:IL08 Elaboration of Low-energy Consuming Materials
G.L. LECOMTE-NANA, IRCER (UMR CNRS 7315), ENSIL-ENSCI, University of Limoges, Limoges, France
CN-1:L09 Effects of Raw Material Changes on the Composition and Mechanical Behaviour of Porcelain Stoneware Tiles
M. SISTI, A.F. GUALTIERI, R. ARLETTI, University of Modena and Reggio Emilia, Modena, Italy; W. PABST, E. GREGOROVÁ, P. ŠIMONOVÁ, University of Chemistry and Technology Prague, Prague, Czech Republic
CN-1:L10 Study on the Incorporation of Fly Ash as Secondary Material in the Formulation of Conventional Refractory Castable to Increase the Percentage of Recycled Waste and Achieve Sustainable Development
J.F. LÓPEZ PERALES, L. DÍAZ-TATO, S.U. COSTILLA-AGUILAR, F. BANDA-MUÑOZ, E.A. RODRÍGUEZ, Universidad Autónoma de Nuevo León (UANL), Facultad de Ingeniería Mecánica y Eléctrica (FIME), Programa Doctoral en Ingeniería de Materiales, San Nicolás de los Garza, Nuevo León, México
Session CN-2 Glasses, glazes and pigments
CN-2:IL11 Synthesis and Characterization of Lithium Aluminium Silicate-containing Materials
O.R.K. MONTEDO1, J.M. INOCENTE1, R. MORENO2, S. ARCARO1, 1 Laboratório de Cerâmica Técnica (CerTec), Programa de Pós-graduação em Ciência e Engenharia de Materiais (PPGGEM), Universidade do Extremo Sul Catarinense (UNESC), Criciúma (SC), Brazil; 2Institute of Ceramics & Glass, CSIC, Madrid, Spain
CN-2:IL12 Development of Sustainable Glazes for Stoneware Products
M.P. SEABRA, M.N. CAPELA, I. VILARINHO, I. VIEIRA, CICECO – Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal; J. CARNEIRO, Grestel - Produtos Cerâmicos S.A, Vagos, Portugal
CN-2:L13 A Comprehensive View of Mullite Formation in Porcelain
W. CARTY, HYOJIN LEE, New York State College of Ceramics at Alfred University, Alfred, NY, USA
CN-2:L14 Eco-friendly Precipitation Synthesis of Egyptian Blue (CaCuSi4O10) pigment
Z.A. HOVHANNISYAN, A.R. ISAHAKYAN, A.M. TERZYAN, I.A. PETROSYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
CN-2:IL15 Non-invasive Characterization of Experimental Ceramics and Tiles Unearthed at the İznik Tile Kilns Excavation
G. ŞİMŞEK FRANCİ, Department of Metallurgical and Materials Engineering, Istanbul Gedik University, Istanbul, Türkiye
CN-2:IL16 ZnO, SrO, BaO, their Role and Influence on the Structure and Properties of Ceramic Glazes
K. PASIUT, J. PARTYKA, D. KOZIEŃ, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractory Materials, Krakow, Poland
CN-2:IL17 Development of Willemite Crystals on Stoneware Glaze
L.K. SHARMA, Mahamana Ceramic Development Organization, Khurja, India
CN-2:L18 A Borax- and Fluoride-Free Precipitation Approach of Victoria Green Pigment
A.A. KIRAKOSYAN, A.R. ISAHAKYAN, A.M. TERZYAN, V.G. STEPANYAN, H.A. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia
CN-2:IL19 Ultrafast Development of Blue Pigment for In Situ Laserdigital Coloration in the Ceramic Industry
J.B. CARDA, A. LAHLAHI-ATTALHAOUI, J. GONZÁLEZ CUADRA, S. PORCAR GARCÍA, S. LUIS TOCA, Universitat Jaume I, Castellon, Spain
CN-2:IL20 High Solar Reflectance Ceramic Tiles Incorporating Secondary Raw Materials for Sustainable Architectural Heritage Renovation
E.I. CEDILLO-GONZÁLEZ, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy and National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy; D. CASOTTI, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy; T. GEORGIADIS, L. CREMONINI, D. FAMULARI, Institute for the BioEconomy CNR, Bologna, Italy; S. BANDINI, CERTIMAC, Faenza, Italy; C. SILIGARDI, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy and National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy
Session CN-3 Innovative processing
CN-3:L21 Comparison of Porcelain Stoneware Tiles Fired in Traditional, Hydrogen and Electric Kilns
G. OREFICE1, B. FERRARI1, M.C. BIGNOZZI2, E. FRANZONI1,2, 1Centro Ceramico, Sassuolo (MO), Italy; 2Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, University of Bologna, Bologna, Italy
CN-3:L22 Direct Ink Writing of Porous Clay-Based Ceramics
I.Q. MAURY NJOYA1, E. JUSTE2, F. CASARRUBOIS3, G.L. LECOMTE-NANA1, S. ABDELOUHAB2, C. DELMOTTE2, M. GONON3, Y. EL HAFIANE1, C. PEYRATOUT1, 1Institute of Research for Ceramics IRCER UMR CNRS 7315, Limoges, France; 2Belgian Ceramic Research Centre BCRC, Mons, Belgium; 3Materials Institute, University of Mons, Mons, Belgium
CN-3:IL23 Additive Manufacturing of Glass Materials using Powder Bed-based Processes
E. JUSTE, C. KERMEL, F. PETIT, Belgian Ceramic Research Centre, Mons, Belgium
CN-3:IL24 Powder Granulation in Ceramic Tile Production: Progress and Challenges
C. ZANELLI1, S. CONTE1, C. MOLINARI1, M. DONDI1, F. MARANI2, 1CNR-ISSMC Istituto di Scienza, Tecnologia e Sostenibilità per lo sviluppo dei Materiali Ceramici, Faenza, Italy; 2LB Officine Meccaniche S.p.A., Fiorano Modenese (MO), Italy
CN-3:IL25 Ceramic Additive Manufacturing in 2025: Market Reality, Technical Maturity, and the Road to Scaled Adoption
M.P. GOMEZ-TENA, ITC-AICE, Castellon, Spain