Symposium CM
Session CM-1 Photonic nanomaterials and nanostructures for photonics and energy
CM-1:IL01 Integrating 2D Materials and Ferroelectrics for Next-Generation Photonics and Optoelectronics
M.O. RAMÍREZ, D. HERNÁNDEZ-PINILLA, M.J. MARTINEZ MORILLO, G. LÓPEZ-POLIN, L.E. BAUSÁ, Dept. Física de Materiales, Universidad Autónoma de Madrid, Madrid, Spain
CM-1:IL02 A Third Order Nonlinear Optical Characterization of Niobium-silicon Mixed-oxide Composites using Z-scanning Methods Based on Femtosecond Laser Sources
Z. IQBAL1, I. MAZZUOCCOLO2, A. BIFULCO2, C. IMPARATO2, M. GIOFFRÈ1, A. ARONNE2, L. SIRLETO1, 1National Research Council (CNR), Institute of Applied Sciences and Intelligent Systems, Naples, Italy; 2Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy
CM-1:IL03 Integrated Light-emitting Photonic Devices on Silicon Nitride Platform
THI NGOC LAM TRAN, Department of Microtechnology and Nanoscience, Chalmers University of Technology, Gothenburg, Sweden
CM-1:IL04 Nanostructured Vanadate-Based Materials: Synthesis, Characterization, Properties and Applications
D.J. MARINKOVIĆ, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia
CM-1:IL05 Bioinspired Micro-nano Photonic Materials
MINGZHU LI, Laboratory of Bio-inspired Smart Interface Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China
CM-1:L06 Optoelectronics and Photonics of Single Dislocations in Van der Waals Nanowires
P. SUTTER, Department of Electrical & Computer Engineering, University of Nebraska-Lincoln, Lincoln, NE, USA; E. SUTTER, Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE, USA
CM-1:L07 Prediction of Optical Properties in Particulate Media using Optimized Monte Carlo Method
XIAO ZHOU, ZHONGYANG WANG, TONGXIANG FAN, Shanghai Jiao Tong University, Shanghai, PR China
CM-1:IL08 Bloch Surface Wave Enhanced Emission and Sensing using Photonic Crystal Coupled Emission Platform
S. PANDIT, B. VEERAGHATTAM, School of Nanoscience and Technology, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal, India; R. MURALI, S.S. KUMAR RAAVI, Department of Physics, Indian Institute of Technology Hyderabad, Kandi, Telangana, India; S. SUDHA M. LIS, CNR-IFN, Trento, Italy; P. DAS, Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Europe, Dijon, France; S. BHASKAR, Department of Electrical and Computer Engineering; N. HOLONYAK Jr., Micro and Nanotechnology Laboratory (HMNTL); C.R. WOESE, Institute for Genomic Biology (IGB), University of Illinois at Urbana-Champaign, Urbana, IL, USA; P. KUMAR GUHA, Department of Electronic and Electrical Communication Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India; S. BHAKTHA B N, Department of Physics, Indian Institute of Technology Kharagpur, Kharagpur, India
CM-1:L09 Biomimetic Photonic Multiform Composite for High Performance Radiative Cooling
TONGXIANG FAN, School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai, P.R.China
CM-1:L10 Flexible Glass Planar Systems Fabricated by rf-sputtering
L.T.N. TRAN1,2, S. SUDHA MARIA LIS1, A. CARLOTTO3, A. SZCZUREK4, R. DELL'ANNA5,1, B. BABIARCZU6, O. SAYGINER7, S. VARAS1, A. VINANTE1, S.M. PIETRALUNGA8, J. KRZAK6, O.S. BURSI9,1, D. ZONTA9,1, A. LUKOWIAK10, G.C. RIGHINI11, V.M. SGLAVO12, M. FERRARI1, A. CHIASERA1, 1IFN-CNR, CSMFO Lab and FBK Photonics Unit, Trento, Italy; 2Dept. of Materials Technology, Faculty of Applied Sciences, HCMC University of Technology and Education; 3FBK-SE Center - HyRes; 4Center for Advanced Technologies, Adam Mickiewicz University Poznan, Poland; 5FBK-SD Sensors and Devices Center; 6Dept. of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Poland; 7Department of Mechanical Engineering, Temple University; 8IFN-CNR, Milano, Italy; 9DICAM, University of Trento, Italy; 10ILTSR PAS, Wroclaw, Poland; 11IFAC-CNR, MiPLab, Firenze, Italy; 12Department of Industrial Engineering, University of Trento, Italy
Session CM-2 Luminescent and chromogenic ceramics and glass systems
CM-2:IL11 Photoluminescent Bioactive Glass and Glass-ceramic
A. LUKOWIAK, Institute of Low Temperature and Structure Research, PAS, Wroclaw, Poland; B. BORAK, Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland
CM-2:IL12 Extending the Sensing Range of Optical Fiber Thermometers by using Visible/Infrared Dual Channel Fluorescence of Yb and Er Codoped Oxyfluoride Glass-ceramics
G. GORNI, M. SEDANO, M.J. PASCUAL, Ceramics and Glass Institute, CSIC, Madrid, Spain; M. KOCHANOWICZ, Faculty of Electrical Engineering, Bialystok University of Technology, Bialystok, Poland; D. DOROSZ, Faculty of Materials Science and Ceramics, AGH University of Krakow, Krakow, Poland; C. ZALDO, Materials Science Institute of Madrid, CSIC, Madrid, Spain
CM-2:IL13 Functionally Graded Luminescent, Optical Transparent Composite Ceramics Consolidated by Spark Plasma Sintering
O. KHASANOV, E. DVILIS, V. PAYGIN, D. VALIEV, S. STEPANOV, National Research Tomsk Polytechnic University, Tomsk, Russia
CM-2:IL14 Integration of Vanadium-Doped Phosphors in Glass and Ceramic Matrices
S. CARMONA-TÉLLEZ1, A. N. MEZA-ROCHA1, R. LOZADA2, 1Secretaria de Ciencia, Humanidades, Tecnología e Innovación - Benemérita Universidad Autónoma de Puebla, Puebla, Mexico; 2Benemérita Universidad Autónoma de Puebla, Mexico
CM-2:L15 Design and Characterization of Nd³⁺-Doped Telluro-Silicate Glasses for Laser Materials
P. YASAKA, W. WONGWAN, K. BOONIN, J. KAEWKHAO, Physics Program, Faculty of Science and Technology, Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand; and Center of Excellence in Glass Technology and Materials Science (CEGM), Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand
CM-2:L16 Rare-Earth-free Deep UV Phosphor: Spark Plasma Sintered Zn2SiO4 Ceramics Under Synchrotron Radiation Excitation
J. NECIB, I. HUSSAINOVA, R.E. ROJAS-HERNANDEZ, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Tallinn, Estonia
CM-2:L17 Er3+-Doped Boro-Tellurite Glasses as a New Candidate Material for Optical and Dosimetry Devices
K. BOONIN, S. KHONDARA, P. YASAKA, J. KAEWKHAO, Physics Program, Faculty of Science and Technology, Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand; and Center of Excellence in Glass Technology and Materials Science (CEGM), Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand
CM-2:L18 Sol-Gel and Hydrothermal Synthesis of Luminescent Cadmium Silicates
E.I.A.H.P. SANTOS, T.K. ISHIDA, A.O. ALVES, F.M. VICHI, Instituto de Química - Universidade de São Paulo, São Paulo, Brasil
Session CM-3 Electro-optical magneto-optical and piezoelectric materials
CM-3:IL19 Recycled Rare-Earth Ions for Magneto-Optical and Luminescent Applications
M. NALIN, D.F. FRANCO, E.P.F. NETO, S.J.L. RIBEIRO, São Paulo State University, UNESP, Institute of Chemistry, Araraquara, SP, Brazil
CM-3:L20 Barium Titanate: The Next-generation Materials Platform for Optical Modulators
A.A. DEMKOV, The University of Texas at Austin and La Luce Cristallina, Inc.; A.B. POSADAS, La Luce Cristallina, Inc. Austin, Texas, USA
Session CM-4 Laser materials
CM-4:IL21 Advances in Erbium doped Aluminium Oxide Waveguide Amplifiers: Pathways towards Higher Power and Packaged Integration
D.B. BONNEVILLE, 3+ Photonics Inc, Ottawa, ON, Canada & Luceda Photonics, Ghent, Belgium; C.E. OSORNIO-MARTINEZ, S.M. GARCIA BLANCO, Aluvia, Enschede, Netherlands
CM-4:IL22 Monotlithically Integrated III-V Nanowire Lasers on Silicon
G. KOBLMÜLLER, Institute of Physics and Astronomy, Technical University Berlin, Berlin, Germany
CM-4:IL23 Recent Advances in Fluoride Glass Fiber Lasers from Visible to Mid-Infrared
M. BERNIER, COPL, Laval University, Quebec, Canada
CM-4:L24 Frontiers of Mid-IR Cr and Fe Doped Chalcogenide Ceramic Gain Materials and Lasers
S. MIROV, University of Alabama at Birmingham, Birmingham, AL, USA
CM-4:L25 Development and Characterization of Yb-doped Phosphate Glass-ceramic
K. NASSER, S. BISWAS, L. PETIT, Photonics Laboratory, Tampere University, Tampere, Finland
Session CM-5 Inorganic optical fibers
CM-5:IL26 Advances in Semiconductor Optical Fibers and Their Application in Wearables
LEI WEI, Nanyang Technological University, Singapore
CM-5:IL27 Internal Thermal Management in Fiber Amplifiers and Lasers
J. BALLATO, B. MEEHAN, T.W. HAWKINS, P. DRAGIC, M. DIGONNET, Clemson University, University of Illinois at Urbana-Champaign, Stanford University, USA
CM-5:IL28 Hybrid Glass Fiber and Its Optical Applications
GUOPING DONG, State Key Laboratory of Luminescent Materials and Devices, School of Materials Science and Engineering, South China University of Technology, Guangzhou, China
Session CM-6 Advances in fabrication, characterization and applications
CM-6:IL29 All Photonic Microsensors based on Whipering Gallery Mode Resonators
T. IOPPOLO, Department of Mechanical Engineering, New York Institute of Technology, Old Westbury, NY, USA
CM-6:IL30 Advances in Glass Composite Fabrication for (Bio)photonic Applications
L. PETIT, Tampere University, Tampere, Finland
CM-6:IL31 Freeform Fabrication of Fused Silica Optical Fiber Preforms and Fibers
M.H. FROSZ, A.-O. YAZICI, Max Planck Institute for the Science of Light, Erlangen, Germany; D. ESSER, Fraunhofer Institut für Lasertechnik ILT, Aachen, Germany; F. KOTZ-HELMER, Glassomer GmbH, FMF – Freiburger Materialforschungszentrum, and Department of Microsystems Engineering (IMTEK), University of Freiburg, Germany
CM-6:IL32 Direct-laser-writing in Glass Chips and Optical Fibers
M. BELLEC, Université Côte d’Azur, CNRS, INPHYNI, France
CM-6:IL33 WGM-based Biosensors: Principles, Challenges, and Perspectives
S. BERNESCHI, F. COSI, D. FARNESI, G. FRIGENTI, A. GIANNETTI, S. PELLI, G. C. RIGHINI, S. SORIA, S. TOMBELLI, C. TRONO, G. NUNZI CONTI, F. BALDINI, IFAC-CNR, Sesto Fiorentino (FI), Italy
CM-1:IL01 Integrating 2D Materials and Ferroelectrics for Next-Generation Photonics and Optoelectronics
M.O. RAMÍREZ, D. HERNÁNDEZ-PINILLA, M.J. MARTINEZ MORILLO, G. LÓPEZ-POLIN, L.E. BAUSÁ, Dept. Física de Materiales, Universidad Autónoma de Madrid, Madrid, Spain
CM-1:IL02 A Third Order Nonlinear Optical Characterization of Niobium-silicon Mixed-oxide Composites using Z-scanning Methods Based on Femtosecond Laser Sources
Z. IQBAL1, I. MAZZUOCCOLO2, A. BIFULCO2, C. IMPARATO2, M. GIOFFRÈ1, A. ARONNE2, L. SIRLETO1, 1National Research Council (CNR), Institute of Applied Sciences and Intelligent Systems, Naples, Italy; 2Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Naples, Italy
CM-1:IL03 Integrated Light-emitting Photonic Devices on Silicon Nitride Platform
THI NGOC LAM TRAN, Department of Microtechnology and Nanoscience, Chalmers University of Technology, Gothenburg, Sweden
CM-1:IL04 Nanostructured Vanadate-Based Materials: Synthesis, Characterization, Properties and Applications
D.J. MARINKOVIĆ, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia
CM-1:IL05 Bioinspired Micro-nano Photonic Materials
MINGZHU LI, Laboratory of Bio-inspired Smart Interface Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China
CM-1:L06 Optoelectronics and Photonics of Single Dislocations in Van der Waals Nanowires
P. SUTTER, Department of Electrical & Computer Engineering, University of Nebraska-Lincoln, Lincoln, NE, USA; E. SUTTER, Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE, USA
CM-1:L07 Prediction of Optical Properties in Particulate Media using Optimized Monte Carlo Method
XIAO ZHOU, ZHONGYANG WANG, TONGXIANG FAN, Shanghai Jiao Tong University, Shanghai, PR China
CM-1:IL08 Bloch Surface Wave Enhanced Emission and Sensing using Photonic Crystal Coupled Emission Platform
S. PANDIT, B. VEERAGHATTAM, School of Nanoscience and Technology, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal, India; R. MURALI, S.S. KUMAR RAAVI, Department of Physics, Indian Institute of Technology Hyderabad, Kandi, Telangana, India; S. SUDHA M. LIS, CNR-IFN, Trento, Italy; P. DAS, Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Europe, Dijon, France; S. BHASKAR, Department of Electrical and Computer Engineering; N. HOLONYAK Jr., Micro and Nanotechnology Laboratory (HMNTL); C.R. WOESE, Institute for Genomic Biology (IGB), University of Illinois at Urbana-Champaign, Urbana, IL, USA; P. KUMAR GUHA, Department of Electronic and Electrical Communication Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India; S. BHAKTHA B N, Department of Physics, Indian Institute of Technology Kharagpur, Kharagpur, India
CM-1:L09 Biomimetic Photonic Multiform Composite for High Performance Radiative Cooling
TONGXIANG FAN, School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai, P.R.China
CM-1:L10 Flexible Glass Planar Systems Fabricated by rf-sputtering
L.T.N. TRAN1,2, S. SUDHA MARIA LIS1, A. CARLOTTO3, A. SZCZUREK4, R. DELL'ANNA5,1, B. BABIARCZU6, O. SAYGINER7, S. VARAS1, A. VINANTE1, S.M. PIETRALUNGA8, J. KRZAK6, O.S. BURSI9,1, D. ZONTA9,1, A. LUKOWIAK10, G.C. RIGHINI11, V.M. SGLAVO12, M. FERRARI1, A. CHIASERA1, 1IFN-CNR, CSMFO Lab and FBK Photonics Unit, Trento, Italy; 2Dept. of Materials Technology, Faculty of Applied Sciences, HCMC University of Technology and Education; 3FBK-SE Center - HyRes; 4Center for Advanced Technologies, Adam Mickiewicz University Poznan, Poland; 5FBK-SD Sensors and Devices Center; 6Dept. of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Poland; 7Department of Mechanical Engineering, Temple University; 8IFN-CNR, Milano, Italy; 9DICAM, University of Trento, Italy; 10ILTSR PAS, Wroclaw, Poland; 11IFAC-CNR, MiPLab, Firenze, Italy; 12Department of Industrial Engineering, University of Trento, Italy
Session CM-2 Luminescent and chromogenic ceramics and glass systems
CM-2:IL11 Photoluminescent Bioactive Glass and Glass-ceramic
A. LUKOWIAK, Institute of Low Temperature and Structure Research, PAS, Wroclaw, Poland; B. BORAK, Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland
CM-2:IL12 Extending the Sensing Range of Optical Fiber Thermometers by using Visible/Infrared Dual Channel Fluorescence of Yb and Er Codoped Oxyfluoride Glass-ceramics
G. GORNI, M. SEDANO, M.J. PASCUAL, Ceramics and Glass Institute, CSIC, Madrid, Spain; M. KOCHANOWICZ, Faculty of Electrical Engineering, Bialystok University of Technology, Bialystok, Poland; D. DOROSZ, Faculty of Materials Science and Ceramics, AGH University of Krakow, Krakow, Poland; C. ZALDO, Materials Science Institute of Madrid, CSIC, Madrid, Spain
CM-2:IL13 Functionally Graded Luminescent, Optical Transparent Composite Ceramics Consolidated by Spark Plasma Sintering
O. KHASANOV, E. DVILIS, V. PAYGIN, D. VALIEV, S. STEPANOV, National Research Tomsk Polytechnic University, Tomsk, Russia
CM-2:IL14 Integration of Vanadium-Doped Phosphors in Glass and Ceramic Matrices
S. CARMONA-TÉLLEZ1, A. N. MEZA-ROCHA1, R. LOZADA2, 1Secretaria de Ciencia, Humanidades, Tecnología e Innovación - Benemérita Universidad Autónoma de Puebla, Puebla, Mexico; 2Benemérita Universidad Autónoma de Puebla, Mexico
CM-2:L15 Design and Characterization of Nd³⁺-Doped Telluro-Silicate Glasses for Laser Materials
P. YASAKA, W. WONGWAN, K. BOONIN, J. KAEWKHAO, Physics Program, Faculty of Science and Technology, Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand; and Center of Excellence in Glass Technology and Materials Science (CEGM), Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand
CM-2:L16 Rare-Earth-free Deep UV Phosphor: Spark Plasma Sintered Zn2SiO4 Ceramics Under Synchrotron Radiation Excitation
J. NECIB, I. HUSSAINOVA, R.E. ROJAS-HERNANDEZ, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Tallinn, Estonia
CM-2:L17 Er3+-Doped Boro-Tellurite Glasses as a New Candidate Material for Optical and Dosimetry Devices
K. BOONIN, S. KHONDARA, P. YASAKA, J. KAEWKHAO, Physics Program, Faculty of Science and Technology, Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand; and Center of Excellence in Glass Technology and Materials Science (CEGM), Nakhon Pathom Rajabhat University, Nakhon Pathom, Thailand
CM-2:L18 Sol-Gel and Hydrothermal Synthesis of Luminescent Cadmium Silicates
E.I.A.H.P. SANTOS, T.K. ISHIDA, A.O. ALVES, F.M. VICHI, Instituto de Química - Universidade de São Paulo, São Paulo, Brasil
Session CM-3 Electro-optical magneto-optical and piezoelectric materials
CM-3:IL19 Recycled Rare-Earth Ions for Magneto-Optical and Luminescent Applications
M. NALIN, D.F. FRANCO, E.P.F. NETO, S.J.L. RIBEIRO, São Paulo State University, UNESP, Institute of Chemistry, Araraquara, SP, Brazil
CM-3:L20 Barium Titanate: The Next-generation Materials Platform for Optical Modulators
A.A. DEMKOV, The University of Texas at Austin and La Luce Cristallina, Inc.; A.B. POSADAS, La Luce Cristallina, Inc. Austin, Texas, USA
Session CM-4 Laser materials
CM-4:IL21 Advances in Erbium doped Aluminium Oxide Waveguide Amplifiers: Pathways towards Higher Power and Packaged Integration
D.B. BONNEVILLE, 3+ Photonics Inc, Ottawa, ON, Canada & Luceda Photonics, Ghent, Belgium; C.E. OSORNIO-MARTINEZ, S.M. GARCIA BLANCO, Aluvia, Enschede, Netherlands
CM-4:IL22 Monotlithically Integrated III-V Nanowire Lasers on Silicon
G. KOBLMÜLLER, Institute of Physics and Astronomy, Technical University Berlin, Berlin, Germany
CM-4:IL23 Recent Advances in Fluoride Glass Fiber Lasers from Visible to Mid-Infrared
M. BERNIER, COPL, Laval University, Quebec, Canada
CM-4:L24 Frontiers of Mid-IR Cr and Fe Doped Chalcogenide Ceramic Gain Materials and Lasers
S. MIROV, University of Alabama at Birmingham, Birmingham, AL, USA
CM-4:L25 Development and Characterization of Yb-doped Phosphate Glass-ceramic
K. NASSER, S. BISWAS, L. PETIT, Photonics Laboratory, Tampere University, Tampere, Finland
Session CM-5 Inorganic optical fibers
CM-5:IL26 Advances in Semiconductor Optical Fibers and Their Application in Wearables
LEI WEI, Nanyang Technological University, Singapore
CM-5:IL27 Internal Thermal Management in Fiber Amplifiers and Lasers
J. BALLATO, B. MEEHAN, T.W. HAWKINS, P. DRAGIC, M. DIGONNET, Clemson University, University of Illinois at Urbana-Champaign, Stanford University, USA
CM-5:IL28 Hybrid Glass Fiber and Its Optical Applications
GUOPING DONG, State Key Laboratory of Luminescent Materials and Devices, School of Materials Science and Engineering, South China University of Technology, Guangzhou, China
Session CM-6 Advances in fabrication, characterization and applications
CM-6:IL29 All Photonic Microsensors based on Whipering Gallery Mode Resonators
T. IOPPOLO, Department of Mechanical Engineering, New York Institute of Technology, Old Westbury, NY, USA
CM-6:IL30 Advances in Glass Composite Fabrication for (Bio)photonic Applications
L. PETIT, Tampere University, Tampere, Finland
CM-6:IL31 Freeform Fabrication of Fused Silica Optical Fiber Preforms and Fibers
M.H. FROSZ, A.-O. YAZICI, Max Planck Institute for the Science of Light, Erlangen, Germany; D. ESSER, Fraunhofer Institut für Lasertechnik ILT, Aachen, Germany; F. KOTZ-HELMER, Glassomer GmbH, FMF – Freiburger Materialforschungszentrum, and Department of Microsystems Engineering (IMTEK), University of Freiburg, Germany
CM-6:IL32 Direct-laser-writing in Glass Chips and Optical Fibers
M. BELLEC, Université Côte d’Azur, CNRS, INPHYNI, France
CM-6:IL33 WGM-based Biosensors: Principles, Challenges, and Perspectives
S. BERNESCHI, F. COSI, D. FARNESI, G. FRIGENTI, A. GIANNETTI, S. PELLI, G. C. RIGHINI, S. SORIA, S. TOMBELLI, C. TRONO, G. NUNZI CONTI, F. BALDINI, IFAC-CNR, Sesto Fiorentino (FI), Italy