Symposium CJ
Session CJ-1 Synthesis, processing and microstructure
CJ-1:IL01 Clay-Based Porous Geopolymers: Influence of Raw Materials, Curing, and Processing
E. PRUD'HOMME, L. GREMILLARD, MATEIS, INSA Lyon, France; O. SORE, LaCER, Université Nazi BONI, Burkinsa Faso; C. ZOUDE, INISMa-CRIBC (BCRC), Belgium; A. MESSAN, P. NSHIMIYIMANA, LEMHaD, Institut 2iE Gilles Escadaillas, LMDC, INSA Toulouse, France
CJ-1:IL02 Influence of Shaping Process on Geopolymer Microstructure
M.C. BIGNOZZI, G. MASI, C. PACENTE, A. SACCANI, University of Bologna, Department of Civil, Chemical, Environmental and Materials Engineering, Bologna, Italy
CJ-1:IL03 Soil Stabilization by Alkali Activation
L. ŽIBRET, K. FIFER BIZJAK, V. DUCMAN, Slovenian National Building and Civil Engineering Institute (ZAG), Ljubljana, Slovenia
CJ-1:IL04 Heavy Metals and Anions Encapsulation in Geopolymers: the Role of Chemical Agents
F. GENUA1, M. GIOVINI1, R.E. RUSSO2, M. FATTOBENE2, M. BERRETTONI2, C. LEONELLI1, I. LANCELLOTTI1, 1Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Modena, Italy; 2School of Science and Technology, University of Camerino, Camerino, Italy
CJ-1:IL05 Mechanical and Microstructural Performance of Geopolymers Synthesized from Agroindustrial Residues in Brazil: Challenges and Future Applications
MS SEYEDSALEHI, D. RIVERA ORJUELA, G. BONINI DE CASTRO, A.C. CONSTÂNCIO TRINDADE, Department of Biosystems Engineering, University of São Paulo, Pirassununga, SP, Brazil
CJ-1:L06 Microstructural Investigation of Alkali Activated Materials Based on Different By-products after Accelerated Carbonation
G. MASI, C. PACENTE, University of Bologna, Department of Civil, Chemical, Environmental and Materials Engineering, Bologna, Italy; S. BANDINI, Certimac, Faenza (RA), Italy; L. CASINI, Centro Ceramico, Sassuolo (MO), Italy; M.C. BIGNOZZI, University of Bologna, Department of Civil, Chemical, Environmental and Materials Engineering, Bologna, Italy
CJ-1:L07 Immobilization of Hazardous Exhausted Lime in Alkali-Activated Matrices
F. GENUA, C. LEONELLI, I. LANCELLOTTI, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy
CJ-1:L08 Microstructural and Mechanical Behavior of Geopolymers Incorporating Phosphate Waste Rocks
A. HAIDA, S. MANSOURI, Y. TAMRAOUI, J. ALAMI, Benguerir, Morocco
CJ-1:IL09 Role of Nanomaterials in the Synthesis of Functional Porous Matrices
F.A.N. NGASSA1, Y. BOGNE1, I.F. GILDAS1, A.P. YEPSEU1, G.A. TIGWERE1, L.D. NYAMEN1, N. REVAPRASADU2, P.T. NDIFON1, 1Department of Inorganic Chemistry, University of Yaoundé 1, Cameroon; 2Department of Chemistry, University of Zululand, South Africa
CJ-1:IL10 Cold-sintering of Fe-based Aluminosilicates
E. KAMSEU1,2, M. BIESUZ3, C. LEONELLI1, V.M SGLAVO3, 1Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Modena, Italy; 2Laboratorty EEPER-MD, Local Materials Promotion Authority/MIPROMALO, Nkolbikok, Yaounde, Cameroon; 3Department of Industrial Engineering, University of Trento, Povo, Trento, Italy
CJ-1:L11 Layered Double Hydroxides With Immobilized Porphyrin Compounds - Synthesis and Study of Properties
A. LIPKE, D. SOKOL, A. KAREIVA, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Vilnius, Lithuania; A. LIPKE, A. GŁADYSZ-PŁASKA, M. MAJDAN, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University in Lublin, Lublin, Poland
CJ-1:L12 Influence of the Chemistry of Various Volcanic Ash on their Use as Cement Replacement in Cameroon
I. NGASSAM, Civil and Architecture Engineering Department, University of Buea, Buea, Cameroon
CJ-1:IL13 Processing Options to Create More Sustainable Materials
Y. PONTIKES, KU Leuven, Department of Materials Engineering, Leuven, Belgium
CJ-1:L14 Development of Porous Biochar-Alkaline Activated Hybrid Materials for Water Remediation
S. BUENO, R. VICO-LUJANO, P. DELGADO-PLANA, D. ELICHE-QUESADA, L. PÉREZ-VILLAREJO, Chemical, Environmental and Materials Department. University of Jaén, Jaén, Spain
CJ-1:L15 Alkali-Activated Natural Zeolite Geopolymers: Insights into the Mechanical Properties of Mortars
N. ULLOA1, K. VACA1, G. VACA1, H. BAYKARA2, C. PAREDES2, M. CORNEJO2, 1Escuela Superior Politécnica de Chimborazo - ESPOCH, Riobamba, Equador; 2Escuela Superior Politécnica del Litoral - ESPOL, Equador
CJ-1:L16 Cold Sintering of Etna Volcanic Ash for Sustainable Building Material Production
L. KARACASULU, P. PAZERAUSKAITE, M. KERMANI, V.M. SGLAVO, M. BIESUZ, Department of Industrial Engineering, University of Trento, Trento, Italy; D. DI GENOVA, CNR-ISSMC, Institute of Science, Technology and Sustainability for Ceramic Materials, Rome, Italy
CJ-1:L17 Study of Hybrid Binders with Fly Ash, Ground Granulated Blast Furnace Slag and Silica Fume in a Calcium Sulfoaluminate Cement Matrix
L.I. RODRÍGUEZ-BARBOZA, L.Y. GÓMEZ-ZAMORANO, Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, Centro de Investigacion y Desarrollo Tecnologico, Ciudad Universitaria, San Nicolás, Nuevo León, México
Session CJ-2 Properties
CJ-2:IL18 Use of Isotopically Labeled Water in the Dissolution Process of MK-Based Geopolymers
C. LEONELLI, F. GENUA, M. GIOVINI, I. LANCELLOTTI, Department of Engineering “Enzo Ferrari” – University of Modena and Reggio Emilia, Modena, Italy
CJ-2:L19 Development of Low-Cost Geopolymer Matrix Composites (GMCs) for Helicopter Firewalls
P. VIERHAUS, Fraunhofer Centre HTL, Bayreuth, Germany
CJ-2:IL20 Geopolymers and their Potential Applications
W.M. KRIVEN, University of Illinois at Urbana-Champaign, Materials Science and Engineering Department, Urbana, IL, USA
CJ-2:IL21 Durability Aspect of Geopolymers and Alkali Activated Materials
V. DUCMAN, ZAG, Ljubljana, Slovenia; A. TESOVNIK, ZAG, Ljubljana, Slovenia
CJ-2:L22 The Effect of Mechanical Activation on the Properties of Geopolymer Properties
E. FIDANCHEVSKI1, D. PANIAS2, I.P. GIANNOPOULOU2, V. JOVANOV1, B. ANGJUSHEVA1, 1Ss. Cyril and Methodius University in Skopje, Faculty of Technology and Metallurgy, Skopje, Republic of North Macedonia; 2Section of Metallurgy and Materials Technology, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
CJ-2:IL23 Zeta Potential a Tool to Explain Properties in Relation with Drastic Applications
S. ROSSIGNOL, IRCER Limoges University, Limoges, France
CJ-2:L24 Freeze–thaw resistance of metakaolin geopolymer pavers
A. TESOVNIK, V. DUCMAN, Slovenian National Building and Civil Engineering Institute, Laboratory for Cements, Mortars and Ceramics, Ljubljana, Slovenia
CJ-2:L25 Ceramic Waste as a Sustainable Binder Component in Cement-based Mortars
T. KRONBERG, J-E. ERIKSSON, T. MANNISTO, L. HUPA, Åbo Akademi University, Turku, Finland
Session CJ-3 Structural and functional applications
CJ-3:IL26 New Strategies to Reduce and Store CO2 Emissions in Building Materials Using Inorganic Polymers
C.H. RÜSCHER, S. TOME, Institut für Erdsystemwissenschaften, Leibniz Universität Hannover, Hannover, Germany
CJ-3:IL27 Potassium Metakaolin-based Geopolymers Containing Microwave Susceptible SiC
P. KEANE1,2, F. BRUNO1, W. SAW2, 1Future Industries Institute, University of South Australia, Mawson Lake, Australia; 2School of Chemical Engineering, University of Adelaide, Australia
CJ-3:IL28 Performance of Geopolymer Granules on Acoustic Insulation Properties
N. KABIR, P. PERUMAL, University of Oulu, Oulu, Finland
CJ-3:L29 Alkali-Activated Fly Ash as Matrix Material for Carbon Fiber Textile Reinforcement in Concrete
R. FÜRST, P. HLAVACEK, G. HÜSKEN, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
CJ-3:IL30 Development of High Early-strength Precast Concrete Products through Geopolymer Technology
WEI-HAO LEE, Institute of Mineral Resources Engineering, National Taipei University of Technology, Taipei City, Taiwan
CJ-3:IL31 Advances in Geopolymer Coatings for Diverse Applications: The Contribution of Artificial Intelligence
A. GHARZOUNI, A. BOUZID, S. ROSSIGNOL, IRCER UMR 7315 CNRS, Limoges, France
CJ-3:IL32 Dynamic and Blast-Resistant Behavior of Fiber-Reinforced Geopolymer Composites for Sustainable Military Infrastructure
YING-KUAN TSAI, National Yang Ming Chiao Tung University, Hsinchu City, Taiwan
CJ-1:IL01 Clay-Based Porous Geopolymers: Influence of Raw Materials, Curing, and Processing
E. PRUD'HOMME, L. GREMILLARD, MATEIS, INSA Lyon, France; O. SORE, LaCER, Université Nazi BONI, Burkinsa Faso; C. ZOUDE, INISMa-CRIBC (BCRC), Belgium; A. MESSAN, P. NSHIMIYIMANA, LEMHaD, Institut 2iE Gilles Escadaillas, LMDC, INSA Toulouse, France
CJ-1:IL02 Influence of Shaping Process on Geopolymer Microstructure
M.C. BIGNOZZI, G. MASI, C. PACENTE, A. SACCANI, University of Bologna, Department of Civil, Chemical, Environmental and Materials Engineering, Bologna, Italy
CJ-1:IL03 Soil Stabilization by Alkali Activation
L. ŽIBRET, K. FIFER BIZJAK, V. DUCMAN, Slovenian National Building and Civil Engineering Institute (ZAG), Ljubljana, Slovenia
CJ-1:IL04 Heavy Metals and Anions Encapsulation in Geopolymers: the Role of Chemical Agents
F. GENUA1, M. GIOVINI1, R.E. RUSSO2, M. FATTOBENE2, M. BERRETTONI2, C. LEONELLI1, I. LANCELLOTTI1, 1Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Modena, Italy; 2School of Science and Technology, University of Camerino, Camerino, Italy
CJ-1:IL05 Mechanical and Microstructural Performance of Geopolymers Synthesized from Agroindustrial Residues in Brazil: Challenges and Future Applications
MS SEYEDSALEHI, D. RIVERA ORJUELA, G. BONINI DE CASTRO, A.C. CONSTÂNCIO TRINDADE, Department of Biosystems Engineering, University of São Paulo, Pirassununga, SP, Brazil
CJ-1:L06 Microstructural Investigation of Alkali Activated Materials Based on Different By-products after Accelerated Carbonation
G. MASI, C. PACENTE, University of Bologna, Department of Civil, Chemical, Environmental and Materials Engineering, Bologna, Italy; S. BANDINI, Certimac, Faenza (RA), Italy; L. CASINI, Centro Ceramico, Sassuolo (MO), Italy; M.C. BIGNOZZI, University of Bologna, Department of Civil, Chemical, Environmental and Materials Engineering, Bologna, Italy
CJ-1:L07 Immobilization of Hazardous Exhausted Lime in Alkali-Activated Matrices
F. GENUA, C. LEONELLI, I. LANCELLOTTI, Department of Engineering “Enzo Ferrari” - University of Modena and Reggio Emilia, Modena, Italy
CJ-1:L08 Microstructural and Mechanical Behavior of Geopolymers Incorporating Phosphate Waste Rocks
A. HAIDA, S. MANSOURI, Y. TAMRAOUI, J. ALAMI, Benguerir, Morocco
CJ-1:IL09 Role of Nanomaterials in the Synthesis of Functional Porous Matrices
F.A.N. NGASSA1, Y. BOGNE1, I.F. GILDAS1, A.P. YEPSEU1, G.A. TIGWERE1, L.D. NYAMEN1, N. REVAPRASADU2, P.T. NDIFON1, 1Department of Inorganic Chemistry, University of Yaoundé 1, Cameroon; 2Department of Chemistry, University of Zululand, South Africa
CJ-1:IL10 Cold-sintering of Fe-based Aluminosilicates
E. KAMSEU1,2, M. BIESUZ3, C. LEONELLI1, V.M SGLAVO3, 1Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Modena, Italy; 2Laboratorty EEPER-MD, Local Materials Promotion Authority/MIPROMALO, Nkolbikok, Yaounde, Cameroon; 3Department of Industrial Engineering, University of Trento, Povo, Trento, Italy
CJ-1:L11 Layered Double Hydroxides With Immobilized Porphyrin Compounds - Synthesis and Study of Properties
A. LIPKE, D. SOKOL, A. KAREIVA, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Vilnius, Lithuania; A. LIPKE, A. GŁADYSZ-PŁASKA, M. MAJDAN, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University in Lublin, Lublin, Poland
CJ-1:L12 Influence of the Chemistry of Various Volcanic Ash on their Use as Cement Replacement in Cameroon
I. NGASSAM, Civil and Architecture Engineering Department, University of Buea, Buea, Cameroon
CJ-1:IL13 Processing Options to Create More Sustainable Materials
Y. PONTIKES, KU Leuven, Department of Materials Engineering, Leuven, Belgium
CJ-1:L14 Development of Porous Biochar-Alkaline Activated Hybrid Materials for Water Remediation
S. BUENO, R. VICO-LUJANO, P. DELGADO-PLANA, D. ELICHE-QUESADA, L. PÉREZ-VILLAREJO, Chemical, Environmental and Materials Department. University of Jaén, Jaén, Spain
CJ-1:L15 Alkali-Activated Natural Zeolite Geopolymers: Insights into the Mechanical Properties of Mortars
N. ULLOA1, K. VACA1, G. VACA1, H. BAYKARA2, C. PAREDES2, M. CORNEJO2, 1Escuela Superior Politécnica de Chimborazo - ESPOCH, Riobamba, Equador; 2Escuela Superior Politécnica del Litoral - ESPOL, Equador
CJ-1:L16 Cold Sintering of Etna Volcanic Ash for Sustainable Building Material Production
L. KARACASULU, P. PAZERAUSKAITE, M. KERMANI, V.M. SGLAVO, M. BIESUZ, Department of Industrial Engineering, University of Trento, Trento, Italy; D. DI GENOVA, CNR-ISSMC, Institute of Science, Technology and Sustainability for Ceramic Materials, Rome, Italy
CJ-1:L17 Study of Hybrid Binders with Fly Ash, Ground Granulated Blast Furnace Slag and Silica Fume in a Calcium Sulfoaluminate Cement Matrix
L.I. RODRÍGUEZ-BARBOZA, L.Y. GÓMEZ-ZAMORANO, Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, Centro de Investigacion y Desarrollo Tecnologico, Ciudad Universitaria, San Nicolás, Nuevo León, México
Session CJ-2 Properties
CJ-2:IL18 Use of Isotopically Labeled Water in the Dissolution Process of MK-Based Geopolymers
C. LEONELLI, F. GENUA, M. GIOVINI, I. LANCELLOTTI, Department of Engineering “Enzo Ferrari” – University of Modena and Reggio Emilia, Modena, Italy
CJ-2:L19 Development of Low-Cost Geopolymer Matrix Composites (GMCs) for Helicopter Firewalls
P. VIERHAUS, Fraunhofer Centre HTL, Bayreuth, Germany
CJ-2:IL20 Geopolymers and their Potential Applications
W.M. KRIVEN, University of Illinois at Urbana-Champaign, Materials Science and Engineering Department, Urbana, IL, USA
CJ-2:IL21 Durability Aspect of Geopolymers and Alkali Activated Materials
V. DUCMAN, ZAG, Ljubljana, Slovenia; A. TESOVNIK, ZAG, Ljubljana, Slovenia
CJ-2:L22 The Effect of Mechanical Activation on the Properties of Geopolymer Properties
E. FIDANCHEVSKI1, D. PANIAS2, I.P. GIANNOPOULOU2, V. JOVANOV1, B. ANGJUSHEVA1, 1Ss. Cyril and Methodius University in Skopje, Faculty of Technology and Metallurgy, Skopje, Republic of North Macedonia; 2Section of Metallurgy and Materials Technology, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
CJ-2:IL23 Zeta Potential a Tool to Explain Properties in Relation with Drastic Applications
S. ROSSIGNOL, IRCER Limoges University, Limoges, France
CJ-2:L24 Freeze–thaw resistance of metakaolin geopolymer pavers
A. TESOVNIK, V. DUCMAN, Slovenian National Building and Civil Engineering Institute, Laboratory for Cements, Mortars and Ceramics, Ljubljana, Slovenia
CJ-2:L25 Ceramic Waste as a Sustainable Binder Component in Cement-based Mortars
T. KRONBERG, J-E. ERIKSSON, T. MANNISTO, L. HUPA, Åbo Akademi University, Turku, Finland
Session CJ-3 Structural and functional applications
CJ-3:IL26 New Strategies to Reduce and Store CO2 Emissions in Building Materials Using Inorganic Polymers
C.H. RÜSCHER, S. TOME, Institut für Erdsystemwissenschaften, Leibniz Universität Hannover, Hannover, Germany
CJ-3:IL27 Potassium Metakaolin-based Geopolymers Containing Microwave Susceptible SiC
P. KEANE1,2, F. BRUNO1, W. SAW2, 1Future Industries Institute, University of South Australia, Mawson Lake, Australia; 2School of Chemical Engineering, University of Adelaide, Australia
CJ-3:IL28 Performance of Geopolymer Granules on Acoustic Insulation Properties
N. KABIR, P. PERUMAL, University of Oulu, Oulu, Finland
CJ-3:L29 Alkali-Activated Fly Ash as Matrix Material for Carbon Fiber Textile Reinforcement in Concrete
R. FÜRST, P. HLAVACEK, G. HÜSKEN, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
CJ-3:IL30 Development of High Early-strength Precast Concrete Products through Geopolymer Technology
WEI-HAO LEE, Institute of Mineral Resources Engineering, National Taipei University of Technology, Taipei City, Taiwan
CJ-3:IL31 Advances in Geopolymer Coatings for Diverse Applications: The Contribution of Artificial Intelligence
A. GHARZOUNI, A. BOUZID, S. ROSSIGNOL, IRCER UMR 7315 CNRS, Limoges, France
CJ-3:IL32 Dynamic and Blast-Resistant Behavior of Fiber-Reinforced Geopolymer Composites for Sustainable Military Infrastructure
YING-KUAN TSAI, National Yang Ming Chiao Tung University, Hsinchu City, Taiwan