Symposium CE
Porous Ceramics for Environmental Protection, Energy-related Technologies and Advanced Industrial Cycles
TUESDAY JUNE 16 AFTERNOON
Room: RELATORI
Chair: Yu-Ping ZENG, China (Convener)
14.25 Welcome
14.30 CE-1:IL01 The Extruded Ceramic Membrane Support and Nanopore Coating: Recent Developments and Prospect
IN-HYUCK SONG, H.J. LEE, J.H. HA, J. LEE, Korea Institute of Materials Science (KIMS), Changwon, Gyeongnam, Republic of Korea
15.00 CE-1:IL02 Porous Materials by Weak Alkali Activation and Sinter Crystallisation of Alumino-silicate Waste
G. TAMENI1,2, M.J. ZAFAR1, F. CAROLLO1, P. SGARBOSSA1, A. MAZZI1, L. CONTRAFATTO3, E. BERNARDO1, 1University of Padova, Department of Industrial Engineering, Italy; 2Sheffield Hallam University, Sheffield, UK; 3University of Catania, Department of Civil Engineering and Architecture, Catania, Italy
15.30 CE-1:IL03 Fabrication of Lithium Silicate on Silica Porous Glass for Carbon Dioxide Removal
MIKI INADA, Department of Applied Chemistry, Faculty of Engineering, Kyushu University, and International Institute for Carbon-Neutral Energy Research, Kyushu University, Fukuoka, Japan
16.00 CE-1:IL04 Tuning of the Porosity in Geopolymers and Geopolymer Composites
V. MEDRI, E. PAPA, C. DI PIETRO, M.C. MARCHIONI, E. LANDI, National Research Council - Institute of Science, Technology and Sustainability for the Development of Ceramic Materials (ISSMC-CNR), Faenza, Italy
WEDNESDAY JUNE 17 MORNING
Room: RELATORI
Chair: Enrico BERNARDO, Italy
9.00 CE-1:IL05 Preparation, Properties and Performance of Porous Silicon Nitride with Marco Sized Pores for Biological Application
JIANFENG YANG, FENG LI, BO WANG, State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, Xi’an, China
9.30 CE-1:IL06 MOFs Functionalization of Additively Manufactured Ceramics for CO2 Capture
A. BERTERO1, B. COPPOLA1, J. SCHMITT2, O. GIMELLO2, P. TRENS2, P. PALMERO1, J.-M. TULLIANI1, 1Politecnico di Torino, Department of Applied Science and Technology, INSTM R.U. Lince Laboratory, Italy; 2Institut Charles Gerhardt, UMR 5253, CNRS-ENSCM-UM, University of Montpellier, Cedex, France
10.00 CE-1:L07 The porous Si3N4 Ceramics Prepared by Modified Water-based Gel Casting and Si Modification
YUPING ZENG, Shanghai Institute of Ceramics , Chinese Academy of Sciences, Shanghai, China
10.20 Break
Chair: In-Hyuck SONG, South Korea
10.50 CE-1:IL11 Alkali-modified CaO/SiOC Nanocomposites for CO2 Capture
S. KAUR1, K. REZWAN1,2, M. WILHELM1, 1Advanced Ceramics, Department of Production Engineering, University of Bremen, Bremen, Germany; 2MAPEX - Centre for Materials and Processes, University of Bremen, Germany
11.20 CE-1:IL12 Modified Slip-casting for Lean Manufacturing of Flow Engineered and Graded Porous Structures
R. TRIHAN1, N. ZAUGG2, B. MINNIG2, P. HOFFMANN2, M. STUER1, 1Nanopowders and Ceramics Group, High Performance Ceramics Laboratory, Swiss Federal Laboratories for Materials Science and Technology (Empa), Dübendorf, Switzerland; 2Laboratory for Advanced Materials Processing, Swiss Federal Laboratories for Materials Science and Technology (Empa), Thun, Switzerland
11.50 CE-1:L13 High Throughput Development of Porous Piezoelectric Ceramics
E. WOLF, C. BLECHINGER, U. ECKSTEIN, K.G. WEBBER, T. FEY, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Bavaria, Germany
12.10 CE-1:L14 Preparation and Characterization of Porous MgAl2O4 Spinel Ceramic
J. ŽIVOJINOVIĆ1, A. FELTRIN2, S. MARKOVIC1, A. MARINKOVIĆ3, N. OBRADOVIĆ1, 1Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Belgrade, Serbia; 2Materials Research Center, Missouri University of Science and Technology, Rolla, MO, USA; 3Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia
THURSDAY JUNE 18 MORNING
Room: RELATORI
Chair: Michaela WILHELM, Germany
9.00 CE-2:IL15 Preparation, Modification and OER Performance of (FeCoNiCrMn)3O4 High-entropy Hollow Porous Nanofibers
HAIJUN ZHANG, The State Key Laboratory of Advanced Refractories, Wuhan University of Science and Technology, Wuhan, China
9.30 CE-2:IL16 Thermal Conductivity of Porous Ceramics: Influence of Microstructure, Environment, and Service Conditions
B. NAIT-ALI, D. VITIELLO, N. TESSIER-DOYEN, D.S. SMITH, University of Limoges, IRCER, UMR CNRS 7315, Limoges, France
10.00 CE-2:L18 Si-Based Polymer-Derived Ceramic Aerogels
C.V. AHMETOGLU, A. GURLO, Technische Universität Berlin, Fakultät III Prozesswissenschaften, Institut für Werkstoffwissenschaften und technologien, Sekretariat BA3, Berlin, Germany
10.20 CE-2:L19 Nano X-ray CT based Microstructural Characterization of Low-Emissivity Porous Ceramics
SHUKO AKAMINE, Mechanical Systems Engineering, National Institute of Technology, Okinawa College, Nago-shi, Okinawa, Japan; SHOGO FURUTA, MASAKAZU KOBAYASHI, Department of Mechanical Engineering, Toyohashi University of Technology, Japan
10.40 Break
Chair: Jianfeng YANG, China
11.10 CE-3:IL21 Three-Dimensional Imaging Techniques for Porous Ceramics Using Confocal Laser Fluorescence Microscopy
MASAKO UEMATSU, T. KIMURA, Japan Fine Ceramics Center, Nagoya, Aichi, Japan; K. ISHII, Nagoya Institute of Technology, Nagoya, Aichi, Japan; T. UCHIKOSHI, National Institute for Materials Science, Tsukuba, Ibaraki, Japan
11.40 CE-3:IL22 The Role of Controlled Porosity in Solid Oxide Materials for Cold Plasma Catalysis and Energy Conversion Applications
J. GURAUSKIS1,2, A.F. GARCIA1, E. GÁLVEZ1, 1Instituto de Nanociencia y Materiales de Aragón (INMA-CSIC/UNIZAR), Consejo Superior de Investigaciones Científicas (CSIC), Universidad de Zaragoza, Zaragoza, Spain; 2Fundación Agencia Aragonesa para la Investigación y el Desarrollo (ARAID), Zaragoza, Spain
12.10 CE-4:IL30 Correlations between Geopolymer Composition, Material Characteristics, and Performance in Adsorption Applications
T. LUUKKONEN, F. HOSSAIN, A. HOSSAIN, Fibre and Particle Engineering Research Unit, University of Oulu, Finland
(rescheduled at the request of the Presenting Author)
FRIDAY JUNE 19 MORNING
Room: SALA STAMPA
Chair: Rui NOVAIS, Portugal
9.30 CE-3:IL23 Study of Geopolymer Porosity through Adsorption and Intrusion Porosimetry
E. PAPA, C. DI PIETRO, M.C. MARCHIONI, F. SERVADEI, V. MEDRI, E. LANDI, National Research Council - Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, RA, Italy
10.00 CE-4:IL26 Environmental-friendly in-situ Mullite Whisker Reinforced Porous Ceramics for Environmental Applications Research
KAIHUI HUA, Dongguan University of Technology, Dongguan, China
10.30 Break
Chair: Jonas GURAUSKIS, Spain
11.00 CE-4:L27 Plasma-Catalytic CO2-to-O2 Conversion Using Boron-Alumina/Silica Nanofiber Membranes for ISRU on Mars
R.A. YAGER, A. STANISHEVSKY, University of Alabama at Birmingham, Birmingham, AL, USA
11.20 CE-4:L28 Mechanically Driven Catalytic Activity of Highly Porous Ceramics
T. STÖTZEL, S. FUNK, T. FEY, Friedrich-Alexander University, Erlangen, Germany
11.40 CE-4:L29 Clay-based Ceramics for Hydrogen Production and Gas Separation
I. REIMANIS1, R. MCGINNIS1, S. RICOTE1, G. COORS2, R. MARDER3, W. KAPLAN3, 1Colorado School of Mines, Golden, CO, USA; 2Hydrogen Helix, Golden, CO, USA; 3Technion - Israel Institute of Technology, Haifa, Israel
FRIDAY JUNE 19 AFTERNOON
Room: SALA STAMPA
Chairs: Yu-Ping ZENG, China
15.00 CE-4:IL31 Alkali-Activated Materials and Geopolymers as Bulk Sorbents for Wastewater Treatment: Current Status and Future Outlook
R.M. NOVAIS1, M.M. ALMEIDA1, A.P.F. CAETANO1, J.G. CUADRA1, N.P.F. GONÇALVES2, J.A. LABRINCHA1, 1Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal; 2Department of Chemistry / CICECO-Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal
15.30 CE-4:IL32 Self-Cleaning BCTZ-Based Piezoelectric Porous Ceramic Membranes for Advanced Microfiltration: A New Strategy for Fouling Control
P. GALIZIA, A. TAVOLARO, C. BALDISSERRI, D. GARDINI, E. MERCADELLI, CNR-ISSMC, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy; F. CRACIUN, F. CORDERO, CNR-ISM, National Research Council of Italy - Institute of Structure of Matter, Tor Vergata, Italy; C. GALASSI, F. BERTOLINI, D. MOMBELLI, N. LECIS, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy; C. CONIDI, A. CASSANO, CNR-ITM, National Research Council of Italy - Institute on Membrane Technology, University of Calabria, Rende, Cosenza, Italy
16.00 CE-4:L33 Synthesis and Surface Modification of Porous Nanoceramics for Energy Storage
I. ZHITOMIRSKY, Department of Materials Science and Engineering, McMaster University, Hamilton, Canada
16.20 CE-4:L34 Optical Gas Sensing Using Terahertz Time-Domain Spectroscopy with porous ceramics
KEIJI KOMATSU1, TOSHIYUKI IWAMOTO2,3, MASAMI AONO4, 1Department of Materials Science and Bioengineering, Nagaoka University of Technology, Niigata, Japan; 2Nippo Precision Co., Ltd., Yamanashi, Japan; 3Institute of Laser Engineering, Osaka University, Osaka, Japan; 4Electrical and Electronics Engineering Program, Graduate School of Science and Engineering, Kagoshima University, Japan
Room: RELATORI
Chair: Yu-Ping ZENG, China (Convener)
14.25 Welcome
14.30 CE-1:IL01 The Extruded Ceramic Membrane Support and Nanopore Coating: Recent Developments and Prospect
IN-HYUCK SONG, H.J. LEE, J.H. HA, J. LEE, Korea Institute of Materials Science (KIMS), Changwon, Gyeongnam, Republic of Korea
15.00 CE-1:IL02 Porous Materials by Weak Alkali Activation and Sinter Crystallisation of Alumino-silicate Waste
G. TAMENI1,2, M.J. ZAFAR1, F. CAROLLO1, P. SGARBOSSA1, A. MAZZI1, L. CONTRAFATTO3, E. BERNARDO1, 1University of Padova, Department of Industrial Engineering, Italy; 2Sheffield Hallam University, Sheffield, UK; 3University of Catania, Department of Civil Engineering and Architecture, Catania, Italy
15.30 CE-1:IL03 Fabrication of Lithium Silicate on Silica Porous Glass for Carbon Dioxide Removal
MIKI INADA, Department of Applied Chemistry, Faculty of Engineering, Kyushu University, and International Institute for Carbon-Neutral Energy Research, Kyushu University, Fukuoka, Japan
16.00 CE-1:IL04 Tuning of the Porosity in Geopolymers and Geopolymer Composites
V. MEDRI, E. PAPA, C. DI PIETRO, M.C. MARCHIONI, E. LANDI, National Research Council - Institute of Science, Technology and Sustainability for the Development of Ceramic Materials (ISSMC-CNR), Faenza, Italy
WEDNESDAY JUNE 17 MORNING
Room: RELATORI
Chair: Enrico BERNARDO, Italy
9.00 CE-1:IL05 Preparation, Properties and Performance of Porous Silicon Nitride with Marco Sized Pores for Biological Application
JIANFENG YANG, FENG LI, BO WANG, State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, Xi’an, China
9.30 CE-1:IL06 MOFs Functionalization of Additively Manufactured Ceramics for CO2 Capture
A. BERTERO1, B. COPPOLA1, J. SCHMITT2, O. GIMELLO2, P. TRENS2, P. PALMERO1, J.-M. TULLIANI1, 1Politecnico di Torino, Department of Applied Science and Technology, INSTM R.U. Lince Laboratory, Italy; 2Institut Charles Gerhardt, UMR 5253, CNRS-ENSCM-UM, University of Montpellier, Cedex, France
10.00 CE-1:L07 The porous Si3N4 Ceramics Prepared by Modified Water-based Gel Casting and Si Modification
YUPING ZENG, Shanghai Institute of Ceramics , Chinese Academy of Sciences, Shanghai, China
10.20 Break
Chair: In-Hyuck SONG, South Korea
10.50 CE-1:IL11 Alkali-modified CaO/SiOC Nanocomposites for CO2 Capture
S. KAUR1, K. REZWAN1,2, M. WILHELM1, 1Advanced Ceramics, Department of Production Engineering, University of Bremen, Bremen, Germany; 2MAPEX - Centre for Materials and Processes, University of Bremen, Germany
11.20 CE-1:IL12 Modified Slip-casting for Lean Manufacturing of Flow Engineered and Graded Porous Structures
R. TRIHAN1, N. ZAUGG2, B. MINNIG2, P. HOFFMANN2, M. STUER1, 1Nanopowders and Ceramics Group, High Performance Ceramics Laboratory, Swiss Federal Laboratories for Materials Science and Technology (Empa), Dübendorf, Switzerland; 2Laboratory for Advanced Materials Processing, Swiss Federal Laboratories for Materials Science and Technology (Empa), Thun, Switzerland
11.50 CE-1:L13 High Throughput Development of Porous Piezoelectric Ceramics
E. WOLF, C. BLECHINGER, U. ECKSTEIN, K.G. WEBBER, T. FEY, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Bavaria, Germany
12.10 CE-1:L14 Preparation and Characterization of Porous MgAl2O4 Spinel Ceramic
J. ŽIVOJINOVIĆ1, A. FELTRIN2, S. MARKOVIC1, A. MARINKOVIĆ3, N. OBRADOVIĆ1, 1Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Belgrade, Serbia; 2Materials Research Center, Missouri University of Science and Technology, Rolla, MO, USA; 3Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia
THURSDAY JUNE 18 MORNING
Room: RELATORI
Chair: Michaela WILHELM, Germany
9.00 CE-2:IL15 Preparation, Modification and OER Performance of (FeCoNiCrMn)3O4 High-entropy Hollow Porous Nanofibers
HAIJUN ZHANG, The State Key Laboratory of Advanced Refractories, Wuhan University of Science and Technology, Wuhan, China
9.30 CE-2:IL16 Thermal Conductivity of Porous Ceramics: Influence of Microstructure, Environment, and Service Conditions
B. NAIT-ALI, D. VITIELLO, N. TESSIER-DOYEN, D.S. SMITH, University of Limoges, IRCER, UMR CNRS 7315, Limoges, France
10.00 CE-2:L18 Si-Based Polymer-Derived Ceramic Aerogels
C.V. AHMETOGLU, A. GURLO, Technische Universität Berlin, Fakultät III Prozesswissenschaften, Institut für Werkstoffwissenschaften und technologien, Sekretariat BA3, Berlin, Germany
10.20 CE-2:L19 Nano X-ray CT based Microstructural Characterization of Low-Emissivity Porous Ceramics
SHUKO AKAMINE, Mechanical Systems Engineering, National Institute of Technology, Okinawa College, Nago-shi, Okinawa, Japan; SHOGO FURUTA, MASAKAZU KOBAYASHI, Department of Mechanical Engineering, Toyohashi University of Technology, Japan
10.40 Break
Chair: Jianfeng YANG, China
11.10 CE-3:IL21 Three-Dimensional Imaging Techniques for Porous Ceramics Using Confocal Laser Fluorescence Microscopy
MASAKO UEMATSU, T. KIMURA, Japan Fine Ceramics Center, Nagoya, Aichi, Japan; K. ISHII, Nagoya Institute of Technology, Nagoya, Aichi, Japan; T. UCHIKOSHI, National Institute for Materials Science, Tsukuba, Ibaraki, Japan
11.40 CE-3:IL22 The Role of Controlled Porosity in Solid Oxide Materials for Cold Plasma Catalysis and Energy Conversion Applications
J. GURAUSKIS1,2, A.F. GARCIA1, E. GÁLVEZ1, 1Instituto de Nanociencia y Materiales de Aragón (INMA-CSIC/UNIZAR), Consejo Superior de Investigaciones Científicas (CSIC), Universidad de Zaragoza, Zaragoza, Spain; 2Fundación Agencia Aragonesa para la Investigación y el Desarrollo (ARAID), Zaragoza, Spain
12.10 CE-4:IL30 Correlations between Geopolymer Composition, Material Characteristics, and Performance in Adsorption Applications
T. LUUKKONEN, F. HOSSAIN, A. HOSSAIN, Fibre and Particle Engineering Research Unit, University of Oulu, Finland
(rescheduled at the request of the Presenting Author)
FRIDAY JUNE 19 MORNING
Room: SALA STAMPA
Chair: Rui NOVAIS, Portugal
9.30 CE-3:IL23 Study of Geopolymer Porosity through Adsorption and Intrusion Porosimetry
E. PAPA, C. DI PIETRO, M.C. MARCHIONI, F. SERVADEI, V. MEDRI, E. LANDI, National Research Council - Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, RA, Italy
10.00 CE-4:IL26 Environmental-friendly in-situ Mullite Whisker Reinforced Porous Ceramics for Environmental Applications Research
KAIHUI HUA, Dongguan University of Technology, Dongguan, China
10.30 Break
Chair: Jonas GURAUSKIS, Spain
11.00 CE-4:L27 Plasma-Catalytic CO2-to-O2 Conversion Using Boron-Alumina/Silica Nanofiber Membranes for ISRU on Mars
R.A. YAGER, A. STANISHEVSKY, University of Alabama at Birmingham, Birmingham, AL, USA
11.20 CE-4:L28 Mechanically Driven Catalytic Activity of Highly Porous Ceramics
T. STÖTZEL, S. FUNK, T. FEY, Friedrich-Alexander University, Erlangen, Germany
11.40 CE-4:L29 Clay-based Ceramics for Hydrogen Production and Gas Separation
I. REIMANIS1, R. MCGINNIS1, S. RICOTE1, G. COORS2, R. MARDER3, W. KAPLAN3, 1Colorado School of Mines, Golden, CO, USA; 2Hydrogen Helix, Golden, CO, USA; 3Technion - Israel Institute of Technology, Haifa, Israel
FRIDAY JUNE 19 AFTERNOON
Room: SALA STAMPA
Chairs: Yu-Ping ZENG, China
15.00 CE-4:IL31 Alkali-Activated Materials and Geopolymers as Bulk Sorbents for Wastewater Treatment: Current Status and Future Outlook
R.M. NOVAIS1, M.M. ALMEIDA1, A.P.F. CAETANO1, J.G. CUADRA1, N.P.F. GONÇALVES2, J.A. LABRINCHA1, 1Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal; 2Department of Chemistry / CICECO-Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal
15.30 CE-4:IL32 Self-Cleaning BCTZ-Based Piezoelectric Porous Ceramic Membranes for Advanced Microfiltration: A New Strategy for Fouling Control
P. GALIZIA, A. TAVOLARO, C. BALDISSERRI, D. GARDINI, E. MERCADELLI, CNR-ISSMC, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy; F. CRACIUN, F. CORDERO, CNR-ISM, National Research Council of Italy - Institute of Structure of Matter, Tor Vergata, Italy; C. GALASSI, F. BERTOLINI, D. MOMBELLI, N. LECIS, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy; C. CONIDI, A. CASSANO, CNR-ITM, National Research Council of Italy - Institute on Membrane Technology, University of Calabria, Rende, Cosenza, Italy
16.00 CE-4:L33 Synthesis and Surface Modification of Porous Nanoceramics for Energy Storage
I. ZHITOMIRSKY, Department of Materials Science and Engineering, McMaster University, Hamilton, Canada
16.20 CE-4:L34 Optical Gas Sensing Using Terahertz Time-Domain Spectroscopy with porous ceramics
KEIJI KOMATSU1, TOSHIYUKI IWAMOTO2,3, MASAMI AONO4, 1Department of Materials Science and Bioengineering, Nagaoka University of Technology, Niigata, Japan; 2Nippo Precision Co., Ltd., Yamanashi, Japan; 3Institute of Laser Engineering, Osaka University, Osaka, Japan; 4Electrical and Electronics Engineering Program, Graduate School of Science and Engineering, Kagoshima University, Japan