Symposium CB
Progress in Additive Manufacturing of Ceramics and Composites
TUESDAY JUNE 16 AFTERNOON
Room: ASSISI A
Chair: Paolo Colombo, Italy (Convener)
14.55 Welcome
15.00 CB-1:IL01 Additive Manufacturing of Glasses and Glass-Ceramics
T. MORITZ, J. SCHILM, A. ROST, E. SCHWARZER-FISCHER, L. GOTTLIEB, A. MÜLLER-KÖHN, Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany
15.30 CB-1:IL02 New 3D Printing Process for Ceramics Based on Dynamical Colloidal Assembly
M. CERBELAUD, G. MICHAUD, F. DUMAS-BOUCHIAT, F. ROSSIGNOL, A. VIDECOQ, Univ. Limoges, CNRS, IRCER, UMR 7315, Limoges, France
16.00 CB-1:IL04 Strategies to Achieve Higher Mechanical Strength in Thermoplastic MExAM 3D Printed Ceramics Structures
F. CLEMENS1, P. JUSTEN1,2, E. MONTAKHAB1, N. THOMAS2, 1Empa - Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland; 2Hochschule Koblenz, WesterWaldCampus, Höhr-Grenzhausen, Germany
16.30 Break
Chair: Tassilo MORITZ, Germany
17.00 CB-1:IL05 Artificial Intelligence and Automatization in Additive Manufacturing for 3D Printing Big Ceramic Parts and Big Series of Parts
E. LOURADOUR, R. GAIGNON, 3DCeram Sinto, Limoges, France
17.30 CB-1:IL06 Extrusion Based 3D Printing of Geopolymer and its Composites
PEIGANG HE, DECHANG JIA, YU ZHOU, Institute for Advanced Ceramics, Harbin Institute of Technology, Harbin, China
18.00 CB-1:L07 Additive Manufacturing of Continuous-fiber Reinforced CMCs
R. GIOMETTI, A. DE MARZI, G. FRANCHIN, P. COLOMBO, Department of Industrial Engineering, Università degli Studi di Padova, Padova, Italy; A. DE ZANET, A. KUMAR, Innovation Hub - Materials Labs, Leonardo SpA, Roma, Lazio, Italy
18.20 CB-1:L08 Continuous Layer Deposition for the Additive Manufacturing of Ceramics by Layerwise Slurry Deposition
J. GUNSTER, A. ZOCCA, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
WEDNESDAY JUNE 17 MORNING
Room: ASSISI A
Chair: Donna GUILLEN, USA
8.30 CB-2:IL10 Pressure-less Spark Plasma Sintering of Ceramics with Graphene-like Networks
A. KOCJAN, N. BHOOTPUR, Jozef Stefan Institute, Ljubljana, Slovenia
9.00 CB-2:IL11 Advancing Ceramic 3D Printing: From Material feedstock to Powder Bed Fusion
D. GROSSIN1, A. MONTÓN1, G. URRUTH1,2, E. ÖZMEN1, M. EID ABDELMOULA3, P. NAVARRETE-SEGADO1,4, F. MAURY1, P. LENORMAND1, D. MAURY2, G. BERTRAND1, C. FRANCES4, M. TOURBIN4, G. KÜÇÜKTÜRK3, 1Univ. Toulouse, Toulouse-INP, CNRS, CIRIMAT, France; 2Marion Technologies, France; 3Gazi University, Turkey; 4Univ. Toulouse, Toulouse-INP, CNRS, LGC, France
9.30 CB-2:L13 Dense ZrB2 via Carboxylmethylcellulose-based Direct Ink Writing and UHS-SPS
F. LEBAS, S. MARINEL, C. MANIÈRE, Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
9.50 CB-2:L14 Predicting 3D-Printed Sintering Distortions Using Combined FEM and Deep Learning Approaches
C. MANIÈRE, Université de Caen Normandie, CRISMAT, Normandie University, ENSICAEN, CNRS, Caen, France
10.10 CB-2:L15 Enhancing Mechanical and Biological Performance of Polymer-Derived Ceramics through LCD 3D Printing and Nanofillers
V. KARAMZADEH1, H. YAZDANI SARVESTANI1, A. SOHRABI-KASHANI1, A. KULKARNI1, T. LACELLE2, M.B. JAKUBINEK2, B. ASHRAFI1, 1Aerospace Manufacturing Technologies Centre, National Research Council Canada, Montreal, QC, Canada; 2Division of Emerging Technologies, National Research Council Canada, Ottawa, ON, Canada
10.30 Break
Chair: Frank CLEMENS, Switzerland
11.00 CB-2:IL16 Development of a Hybrid and Multimaterial Additive Process to Realize AlN / Mo Multilayer Ceramic Component
V. PATELOUP, A. JUNGER, IRCER UMR CNRS 7315, Limoges, France; N. VENET, Thales Alenia Space, Toulouse, France
11.30 CB-2:L17 Combining High-throughput Methods and Robocasting of AZO-ZrO2 Structures for Compositional Screening and Process Optimization
L. WAHL, E. WOLF, T. FEY, Department of Materials Science (Glass and Ceramics), University of Erlangen-Nürnberg, Erlangen, Germany
11.50 CB-2:L18 Optimization of z-leveling in FDM by Deep Learning
J. GERHARDS, F. ROSSIGNOL, IRCER, UMR CNRS 7315, University of Limoges, France
12.10 CB-2:L19 Direct Ink Writing of Sphene (CaTiSiO5) Core-Shell Structures with Enhanced Structural and Functional Properties for Bone Substitutes
V. GASTALDI, L. BIASETTO, University of Padova, Padova, Italy; D. BELLUCCI, V. CANNILLO, University of Modena and Reggio Emilia, Modena, Italy
WEDNESDAY JUNE 17 AFTERNOON
Room: ASSISI A
Chair: David GROSSIN, France
14.30 CB-2:IL20 Microwave Volumetric Additive Manufacturing: Revolutionizing Ceramic Additive Manufacturing
D. POST GUILLEN1, S. MUKHERJEE2, K. STRONG3, C. DECHANT1, E. BUTTERWORTH1, C. ICENHOUR1, E. ROSENBERG2, J. VANDENBRANDE2, N. BELL3, JO. SCHWARTZ2, 1Idaho National Laboratory, Idaho Falls, ID, USA; 2Lawrence Livermore National Laboratory, Livermore, CA, USA; 3Sandia National Laboratories, Albuquerque, NM, USA
15.00 CB-2:IL21 Development of Multi-functional Components for Ultra-High Vacuum Applications Using Multi-material 3D Printing
L. BIASETTO, C. BOARETTI, Department of Industrial Engineering, University of Padova, Padova, Italy; N. DELERUE, Universitè Paris-Saclay, CNRS/IN2P3, Orsay, France
15.30 CB-2:L22 Green State Joining of Ceramic Components Fabricated by DLP Additive Manufacturing
D. MELANSON, G. BOUBNOVA, S. CLEMENS, E. MOREAU, K. PLUCKNETT, Dalhousie University, Dept. of Mechanical Engineering, Halifax, Nova Scotia, Canada
15.50 CB-2:L23 Multi-Material DLP Additive Manufacturing of Al2O3-Based Ceramic Composites
G. BOUBNOVA, S. CLEMENS, A.M. DAVID, E.D. MOREAU, K.P. PLUCKNETT, Dalhousie University, Dept. of Mechanical Engineering, Halifax, NS, Canada; M. HAMIDPOUR, H.Y. SARVESTANI, M. RAHMAT, B. ASHRAFI, Aerospace Manufacturing Technologies Center, National Research Council Canada, Montreal, QC, Canada; M.B. JAKUBINEK, Division of Emerging Technologies, National Research Council Canada, Ottawa, ON, Canada
16.10 Break
Chair: Lisa BIASETTO, Italy
16.40 CB-3:IL26 Direct Ink Write of Ultra-High Temperature Ceramic Matrix Composites
D. CALVO, J. YOUNGBLOOD, R. TRICE, Purdue University, School of Materials Engineering, West Lafayette, IN, USA
17.10 CB-3:L28 Advanced SLA-Based Additive Manufacturing of Lead-Free Piezo-Ceramics: From Powder Synthesis to Functional Devices
I.V. SHISHKOVSKY, Lebedev Physical Institute of RAS, Samara, Russia
17.30 CB-3:L29 Low-temperature Printable Polysiloxane-based Feedstocks for Extrusion-based Additive Manufacturing of Polymer-derived Ceramics
M. SHAH, T. EDTMAIER, T. KONEGGER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria; F. BAUER, M. KRACALIK, Johannes Kepler University Linz, Institute of Polymer Science, Linz, Austria; V. PANDEY, A. IVEKOVIC, Jozef Stefan Institute, Department for Nanostructured Materials, Ljubljana, Slovenia
17.50 CB-3:L29b 3D Printing of Metal Carbides
M. HICKNER, Michigan State University, East Lansing, MI, USA
THURSDAY JUNE 18 MORNING
Room: ASSISI A
Chair: Vincenzo ESPOSITO, Denmark
8.30 CB-3:IL30 2PP of Technical Ceramic – What’s Next?
J. MÜLLER-ELMAU1, B. PAUW1, B. RIECHERS1, A. ZOCCA1, JENS GÜNSTER1,2, 1Federal Institute for Materials Research and Testing (BAM), Berlin, Germany; 2Clausthal University of Technology, Institute of Non-Metallic Materials, Clausthal-Zellerfeld, Germany
9.00 CB-3:IL31 Large Scale Binder Jetting of Ceramics from Waste
H. ELSAYED, P. COLOMBO, Department of Industrial Engineering, University of Padova, Padova, Italy
9.30 CB-4:IL33 X-ray CT Investigation of 3D Printed Ceramics
J. ADRIEN1, H. ELSAYED2, F. GOBBIN2, A. ITALIANO3, E. MAIRE1, P. COLOMBO2,4, M. COFFIGNIEZ1, L. GREMILLARD1, J. LACHAMBRE1, X. BOULNAT1, 1Université de Lyon, INSA de Lyon, CNRS, MATEIS UMR5510, Villeurbanne, France; 2University of Padova, Industrial Engineering Department, Padova, Italy; 3Desamanera Srl, Rovigo, Italy; 4Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, USA
10.00 Break
Chair: Hui-Suk YUN, South Korea
10.30 CB-4:IL34 Nano- and Microscale Characterization of Additively Manufactured Metal-ceramic Nanocomposites
J. SCHWIEDRZIK, Laboratory for High Performance Ceramics, Empa, Switzerland; A. BORZI, A. NEELS, Center for X-ray Analytics, Empa, Switzerland; N. ROHBECK, M. WATROBA, C. GUNDERSON, M. JAIN, J. NIEMELÄ, I. UTKE, J. MICHLER, Laboratory for Mechanics of Materials and Nanostructures, Empa, Switzerland
11.00 CB-4:L35 Characterization of 3D Printed Ceramics using Dielectric Properties and Small Angle Scattering
R.A. GERHARDT, A. KONGANI, Georgia Tech, Atlanta, GA, USA; J. ILAVSKY, Advanced Photon Source, Argonne National Labs, IL, USA; S. ALLAN, Lithoz Americas LLC, Troy, NY, USA
11.20 CB-4:L37 Characterization of the Effects of Thermal Processing Parameters for DLP Additively Manufactured Tri-Calcium Phosphate Ceramics
S.C. CLEMENS, C.W. CHEN, K.P. PLUCKNETT, Department of Mechanical Engineering, Dalhousie University, Halifax, NS, Canada; E. MARIN, Kyoto Institute of Technology, Kyoto, Japan
11.40 CB-4:L38 Toward Efficient Solvent Debinding Strategies for Alumina and Zirconia Parts Produced via Fused Filament Fabrication
A.P. LUZ, M.H. MOREIRA, M.R. MORELLI, Federal University of Sao Carlos (UFSCar), Department of Materials Engineering (DEMa), Sao Carlos, SP, Brazil; T.W.B. FARIAS, Federal University of Sao Carlos, Graduate Program in Materials Science and Engineering, Sao Carlos, SP, Brazil; P. COLOMBO, University of Padova, Department of Industrial Engineering, Padova, Italy
12.20 CB-4:L38b Modifying the Wear Responses of Al2O3 Fabricated using DLP Additive Manufacturing through Processing Control and Microstructure Design
A.M. DAVID, G. BOUBNOVA, S. CLEMENS, K.P. PLUCKNETT, Dalhousie University, Department of Mechanical Engineering, Halifax, NS, Canada
12.40 CB-6:IL46 Escaping Flatland: How 3D Printing Can Change Advanced Ceramic Materials Properties and Applications
V. ESPOSITO, Department of Energy Conversion and Storage, Technical University of Denmark, Kgs. Lyngby, Denmark
(rescheduled at the request of the Presenting Author)
FRIDAY JUNE 19 MORNING
Room: ASSISI A
Chair: Jens GÜNSTER, Germany
8.30 CB-6:IL47 Numerical Design of SiC-based Open-cell Foams Through Topological Optimisation for Use as Volumetric Solar Absorbers
A. DE LA VAUVRE, Y. FAVENNEC, B. ROUSSEAU, LTEN, Nantes Universite, CNRS, Nantes Cedex, France; L. CANGEMI, IFP Energies Nouvelles, Rueil-Malmaison, France
9.00 CB-5:IL39 Direct Ink Writing of Zeolite Pastes for Applications in Atmospheric Water Generation
A. ZOCCA1, X. CHOUQUET1, J. GÜNSTER1,2, 1Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany; 2Institute of Non-Metallic Materials, Clausthal University of Technology, Germany
9.30 CB-5:IL41 Catalyst Supports Made by Additive Manufacturing for Bio-sourced Molecules Conversion
Y. LORGOUILLOUX1, M. MOUNAJ1, F. JEAN1, J. DHAINAUT2, C. COURTOIS1, 1Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS – Laboratoire de Matériaux Céramiques et de Mathématiques, Valenciennes, France; 2Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181 – UCCS – Unité de Catalyse et Chimie du Solide, Lille, France
10.00 Break
Chair: Paolo COLOMBO, Italy
10.30 CB-5:L42 3D-printing of LLZTO Ceramic Electrolyte from Aqueous Inks of High Solids Loading
C. RAMÍREZ1, C. MARTÍNEZ-CISNERO2, M. GARCÍA1, C.M. SHI3,4, B. W. SHELDON4, A. VÁREZ2, M. BELMONTE1, 1Instituto de Cerámica y Vidrio, ICV-CSIC, Cantoblanco, Madrid, España; 2Universidad Carlos III de Madrid, Depto de Ciencia e Ingeniería de Materiales e Ingeniería Química, Leganés, España; 3Department of Mechanical and Aerospace Engineering, Syracuse University, Syracuse, NY, USA; 4School of Engineering, Brown University, Providence, RI, USA
10.50 CB-5:L43 Design and Characterization of TPMS Calcium-Phosphate Scaffolds for Bone Regeneration
G. VERLATO, E. BERNARDO, H. ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
11.10 CB-5:IL45 Yttria-based Transparent Ceramic Fabrication using Photopolymerization-based Additive Manufacturing
HUI-SUK YUN, Korea Institute of Materials Science (KIMS), Changwon, Korea
Room: ASSISI A
Chair: Paolo Colombo, Italy (Convener)
14.55 Welcome
15.00 CB-1:IL01 Additive Manufacturing of Glasses and Glass-Ceramics
T. MORITZ, J. SCHILM, A. ROST, E. SCHWARZER-FISCHER, L. GOTTLIEB, A. MÜLLER-KÖHN, Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany
15.30 CB-1:IL02 New 3D Printing Process for Ceramics Based on Dynamical Colloidal Assembly
M. CERBELAUD, G. MICHAUD, F. DUMAS-BOUCHIAT, F. ROSSIGNOL, A. VIDECOQ, Univ. Limoges, CNRS, IRCER, UMR 7315, Limoges, France
16.00 CB-1:IL04 Strategies to Achieve Higher Mechanical Strength in Thermoplastic MExAM 3D Printed Ceramics Structures
F. CLEMENS1, P. JUSTEN1,2, E. MONTAKHAB1, N. THOMAS2, 1Empa - Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland; 2Hochschule Koblenz, WesterWaldCampus, Höhr-Grenzhausen, Germany
16.30 Break
Chair: Tassilo MORITZ, Germany
17.00 CB-1:IL05 Artificial Intelligence and Automatization in Additive Manufacturing for 3D Printing Big Ceramic Parts and Big Series of Parts
E. LOURADOUR, R. GAIGNON, 3DCeram Sinto, Limoges, France
17.30 CB-1:IL06 Extrusion Based 3D Printing of Geopolymer and its Composites
PEIGANG HE, DECHANG JIA, YU ZHOU, Institute for Advanced Ceramics, Harbin Institute of Technology, Harbin, China
18.00 CB-1:L07 Additive Manufacturing of Continuous-fiber Reinforced CMCs
R. GIOMETTI, A. DE MARZI, G. FRANCHIN, P. COLOMBO, Department of Industrial Engineering, Università degli Studi di Padova, Padova, Italy; A. DE ZANET, A. KUMAR, Innovation Hub - Materials Labs, Leonardo SpA, Roma, Lazio, Italy
18.20 CB-1:L08 Continuous Layer Deposition for the Additive Manufacturing of Ceramics by Layerwise Slurry Deposition
J. GUNSTER, A. ZOCCA, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
WEDNESDAY JUNE 17 MORNING
Room: ASSISI A
Chair: Donna GUILLEN, USA
8.30 CB-2:IL10 Pressure-less Spark Plasma Sintering of Ceramics with Graphene-like Networks
A. KOCJAN, N. BHOOTPUR, Jozef Stefan Institute, Ljubljana, Slovenia
9.00 CB-2:IL11 Advancing Ceramic 3D Printing: From Material feedstock to Powder Bed Fusion
D. GROSSIN1, A. MONTÓN1, G. URRUTH1,2, E. ÖZMEN1, M. EID ABDELMOULA3, P. NAVARRETE-SEGADO1,4, F. MAURY1, P. LENORMAND1, D. MAURY2, G. BERTRAND1, C. FRANCES4, M. TOURBIN4, G. KÜÇÜKTÜRK3, 1Univ. Toulouse, Toulouse-INP, CNRS, CIRIMAT, France; 2Marion Technologies, France; 3Gazi University, Turkey; 4Univ. Toulouse, Toulouse-INP, CNRS, LGC, France
9.30 CB-2:L13 Dense ZrB2 via Carboxylmethylcellulose-based Direct Ink Writing and UHS-SPS
F. LEBAS, S. MARINEL, C. MANIÈRE, Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
9.50 CB-2:L14 Predicting 3D-Printed Sintering Distortions Using Combined FEM and Deep Learning Approaches
C. MANIÈRE, Université de Caen Normandie, CRISMAT, Normandie University, ENSICAEN, CNRS, Caen, France
10.10 CB-2:L15 Enhancing Mechanical and Biological Performance of Polymer-Derived Ceramics through LCD 3D Printing and Nanofillers
V. KARAMZADEH1, H. YAZDANI SARVESTANI1, A. SOHRABI-KASHANI1, A. KULKARNI1, T. LACELLE2, M.B. JAKUBINEK2, B. ASHRAFI1, 1Aerospace Manufacturing Technologies Centre, National Research Council Canada, Montreal, QC, Canada; 2Division of Emerging Technologies, National Research Council Canada, Ottawa, ON, Canada
10.30 Break
Chair: Frank CLEMENS, Switzerland
11.00 CB-2:IL16 Development of a Hybrid and Multimaterial Additive Process to Realize AlN / Mo Multilayer Ceramic Component
V. PATELOUP, A. JUNGER, IRCER UMR CNRS 7315, Limoges, France; N. VENET, Thales Alenia Space, Toulouse, France
11.30 CB-2:L17 Combining High-throughput Methods and Robocasting of AZO-ZrO2 Structures for Compositional Screening and Process Optimization
L. WAHL, E. WOLF, T. FEY, Department of Materials Science (Glass and Ceramics), University of Erlangen-Nürnberg, Erlangen, Germany
11.50 CB-2:L18 Optimization of z-leveling in FDM by Deep Learning
J. GERHARDS, F. ROSSIGNOL, IRCER, UMR CNRS 7315, University of Limoges, France
12.10 CB-2:L19 Direct Ink Writing of Sphene (CaTiSiO5) Core-Shell Structures with Enhanced Structural and Functional Properties for Bone Substitutes
V. GASTALDI, L. BIASETTO, University of Padova, Padova, Italy; D. BELLUCCI, V. CANNILLO, University of Modena and Reggio Emilia, Modena, Italy
WEDNESDAY JUNE 17 AFTERNOON
Room: ASSISI A
Chair: David GROSSIN, France
14.30 CB-2:IL20 Microwave Volumetric Additive Manufacturing: Revolutionizing Ceramic Additive Manufacturing
D. POST GUILLEN1, S. MUKHERJEE2, K. STRONG3, C. DECHANT1, E. BUTTERWORTH1, C. ICENHOUR1, E. ROSENBERG2, J. VANDENBRANDE2, N. BELL3, JO. SCHWARTZ2, 1Idaho National Laboratory, Idaho Falls, ID, USA; 2Lawrence Livermore National Laboratory, Livermore, CA, USA; 3Sandia National Laboratories, Albuquerque, NM, USA
15.00 CB-2:IL21 Development of Multi-functional Components for Ultra-High Vacuum Applications Using Multi-material 3D Printing
L. BIASETTO, C. BOARETTI, Department of Industrial Engineering, University of Padova, Padova, Italy; N. DELERUE, Universitè Paris-Saclay, CNRS/IN2P3, Orsay, France
15.30 CB-2:L22 Green State Joining of Ceramic Components Fabricated by DLP Additive Manufacturing
D. MELANSON, G. BOUBNOVA, S. CLEMENS, E. MOREAU, K. PLUCKNETT, Dalhousie University, Dept. of Mechanical Engineering, Halifax, Nova Scotia, Canada
15.50 CB-2:L23 Multi-Material DLP Additive Manufacturing of Al2O3-Based Ceramic Composites
G. BOUBNOVA, S. CLEMENS, A.M. DAVID, E.D. MOREAU, K.P. PLUCKNETT, Dalhousie University, Dept. of Mechanical Engineering, Halifax, NS, Canada; M. HAMIDPOUR, H.Y. SARVESTANI, M. RAHMAT, B. ASHRAFI, Aerospace Manufacturing Technologies Center, National Research Council Canada, Montreal, QC, Canada; M.B. JAKUBINEK, Division of Emerging Technologies, National Research Council Canada, Ottawa, ON, Canada
16.10 Break
Chair: Lisa BIASETTO, Italy
16.40 CB-3:IL26 Direct Ink Write of Ultra-High Temperature Ceramic Matrix Composites
D. CALVO, J. YOUNGBLOOD, R. TRICE, Purdue University, School of Materials Engineering, West Lafayette, IN, USA
17.10 CB-3:L28 Advanced SLA-Based Additive Manufacturing of Lead-Free Piezo-Ceramics: From Powder Synthesis to Functional Devices
I.V. SHISHKOVSKY, Lebedev Physical Institute of RAS, Samara, Russia
17.30 CB-3:L29 Low-temperature Printable Polysiloxane-based Feedstocks for Extrusion-based Additive Manufacturing of Polymer-derived Ceramics
M. SHAH, T. EDTMAIER, T. KONEGGER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria; F. BAUER, M. KRACALIK, Johannes Kepler University Linz, Institute of Polymer Science, Linz, Austria; V. PANDEY, A. IVEKOVIC, Jozef Stefan Institute, Department for Nanostructured Materials, Ljubljana, Slovenia
17.50 CB-3:L29b 3D Printing of Metal Carbides
M. HICKNER, Michigan State University, East Lansing, MI, USA
THURSDAY JUNE 18 MORNING
Room: ASSISI A
Chair: Vincenzo ESPOSITO, Denmark
8.30 CB-3:IL30 2PP of Technical Ceramic – What’s Next?
J. MÜLLER-ELMAU1, B. PAUW1, B. RIECHERS1, A. ZOCCA1, JENS GÜNSTER1,2, 1Federal Institute for Materials Research and Testing (BAM), Berlin, Germany; 2Clausthal University of Technology, Institute of Non-Metallic Materials, Clausthal-Zellerfeld, Germany
9.00 CB-3:IL31 Large Scale Binder Jetting of Ceramics from Waste
H. ELSAYED, P. COLOMBO, Department of Industrial Engineering, University of Padova, Padova, Italy
9.30 CB-4:IL33 X-ray CT Investigation of 3D Printed Ceramics
J. ADRIEN1, H. ELSAYED2, F. GOBBIN2, A. ITALIANO3, E. MAIRE1, P. COLOMBO2,4, M. COFFIGNIEZ1, L. GREMILLARD1, J. LACHAMBRE1, X. BOULNAT1, 1Université de Lyon, INSA de Lyon, CNRS, MATEIS UMR5510, Villeurbanne, France; 2University of Padova, Industrial Engineering Department, Padova, Italy; 3Desamanera Srl, Rovigo, Italy; 4Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, USA
10.00 Break
Chair: Hui-Suk YUN, South Korea
10.30 CB-4:IL34 Nano- and Microscale Characterization of Additively Manufactured Metal-ceramic Nanocomposites
J. SCHWIEDRZIK, Laboratory for High Performance Ceramics, Empa, Switzerland; A. BORZI, A. NEELS, Center for X-ray Analytics, Empa, Switzerland; N. ROHBECK, M. WATROBA, C. GUNDERSON, M. JAIN, J. NIEMELÄ, I. UTKE, J. MICHLER, Laboratory for Mechanics of Materials and Nanostructures, Empa, Switzerland
11.00 CB-4:L35 Characterization of 3D Printed Ceramics using Dielectric Properties and Small Angle Scattering
R.A. GERHARDT, A. KONGANI, Georgia Tech, Atlanta, GA, USA; J. ILAVSKY, Advanced Photon Source, Argonne National Labs, IL, USA; S. ALLAN, Lithoz Americas LLC, Troy, NY, USA
11.20 CB-4:L37 Characterization of the Effects of Thermal Processing Parameters for DLP Additively Manufactured Tri-Calcium Phosphate Ceramics
S.C. CLEMENS, C.W. CHEN, K.P. PLUCKNETT, Department of Mechanical Engineering, Dalhousie University, Halifax, NS, Canada; E. MARIN, Kyoto Institute of Technology, Kyoto, Japan
11.40 CB-4:L38 Toward Efficient Solvent Debinding Strategies for Alumina and Zirconia Parts Produced via Fused Filament Fabrication
A.P. LUZ, M.H. MOREIRA, M.R. MORELLI, Federal University of Sao Carlos (UFSCar), Department of Materials Engineering (DEMa), Sao Carlos, SP, Brazil; T.W.B. FARIAS, Federal University of Sao Carlos, Graduate Program in Materials Science and Engineering, Sao Carlos, SP, Brazil; P. COLOMBO, University of Padova, Department of Industrial Engineering, Padova, Italy
12.20 CB-4:L38b Modifying the Wear Responses of Al2O3 Fabricated using DLP Additive Manufacturing through Processing Control and Microstructure Design
A.M. DAVID, G. BOUBNOVA, S. CLEMENS, K.P. PLUCKNETT, Dalhousie University, Department of Mechanical Engineering, Halifax, NS, Canada
12.40 CB-6:IL46 Escaping Flatland: How 3D Printing Can Change Advanced Ceramic Materials Properties and Applications
V. ESPOSITO, Department of Energy Conversion and Storage, Technical University of Denmark, Kgs. Lyngby, Denmark
(rescheduled at the request of the Presenting Author)
FRIDAY JUNE 19 MORNING
Room: ASSISI A
Chair: Jens GÜNSTER, Germany
8.30 CB-6:IL47 Numerical Design of SiC-based Open-cell Foams Through Topological Optimisation for Use as Volumetric Solar Absorbers
A. DE LA VAUVRE, Y. FAVENNEC, B. ROUSSEAU, LTEN, Nantes Universite, CNRS, Nantes Cedex, France; L. CANGEMI, IFP Energies Nouvelles, Rueil-Malmaison, France
9.00 CB-5:IL39 Direct Ink Writing of Zeolite Pastes for Applications in Atmospheric Water Generation
A. ZOCCA1, X. CHOUQUET1, J. GÜNSTER1,2, 1Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany; 2Institute of Non-Metallic Materials, Clausthal University of Technology, Germany
9.30 CB-5:IL41 Catalyst Supports Made by Additive Manufacturing for Bio-sourced Molecules Conversion
Y. LORGOUILLOUX1, M. MOUNAJ1, F. JEAN1, J. DHAINAUT2, C. COURTOIS1, 1Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS – Laboratoire de Matériaux Céramiques et de Mathématiques, Valenciennes, France; 2Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181 – UCCS – Unité de Catalyse et Chimie du Solide, Lille, France
10.00 Break
Chair: Paolo COLOMBO, Italy
10.30 CB-5:L42 3D-printing of LLZTO Ceramic Electrolyte from Aqueous Inks of High Solids Loading
C. RAMÍREZ1, C. MARTÍNEZ-CISNERO2, M. GARCÍA1, C.M. SHI3,4, B. W. SHELDON4, A. VÁREZ2, M. BELMONTE1, 1Instituto de Cerámica y Vidrio, ICV-CSIC, Cantoblanco, Madrid, España; 2Universidad Carlos III de Madrid, Depto de Ciencia e Ingeniería de Materiales e Ingeniería Química, Leganés, España; 3Department of Mechanical and Aerospace Engineering, Syracuse University, Syracuse, NY, USA; 4School of Engineering, Brown University, Providence, RI, USA
10.50 CB-5:L43 Design and Characterization of TPMS Calcium-Phosphate Scaffolds for Bone Regeneration
G. VERLATO, E. BERNARDO, H. ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
11.10 CB-5:IL45 Yttria-based Transparent Ceramic Fabrication using Photopolymerization-based Additive Manufacturing
HUI-SUK YUN, Korea Institute of Materials Science (KIMS), Changwon, Korea