Symposium CA
Advances in Processing Science and Manufacturing of High Performance Ceramics and Composites
TUESDAY JUNE 16 AFTERNOON
Room: SPOLETO A
Chair: Monica FERRARIS, Italy (Convener)
14.25 Welcome
14.30 CA-1:IL01 From Droplet Evolution to Activity: Process–Structure–Property Design via Glatt Powder Synthesis
J. BUCHHEIM, V. DRESCHER, T. VOCKENBERG, Glatt Ingenieurtechnik Gmbh, Weimar, Germany
15.00 CA-1:IL02 Synthesis of Aerogels as Functional Ceramics: Routes to Improved Thermal Stability
J.A. KROGSTAD, University of Illinois Urbana Champaign, Urbana, IL, USA
15.30 CA-1:L03 Application of Radiation-Thermal Sintering of Deposited Functional Layers of Structured Catalysts, Membranes and Solid Oxide Fuel Cells
Y. BESPALKO1, N. EREMEEV1, O. BULAVCHENKO1, E. SUPRUN, M. MIKHAILENKO2, M. KOROBEYNIKOV3, V. SADYKOV1, 1Federal Research Center Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia; 2Institute of Solid State Chemistry and Mechanochemistry SB RAS, Novosibirsk, Russia; 3Budker Institute of Nuclear Physics SB RAS, Novosibirsk, Russia
15.50 CA-1:L04 Alternative Methods for the Calibration of the Drucker-Prager/Cap Model, Application to the MOX Fuel Shaping
B. SPANU1, T. REBILLON1, J. P. BAYLE1, A. SOCIÉ2, T. HELFER2, G. BERNARD-GRANGER1, 1CEA, DES, ISEC, DMRC, Univ. Montpellier, Marcoule, France; 2CEA, DES, IRESNE, DEC, Saint-Paul-lez-Durance, France
16.10 CA-1:L05 Application of the Heterocoagulation Phenomenon in Reactive Sintering of MgAl2O4 and Production of MgAl2O4- Al2O3 Composites
O. JURECKA, K. KORNAUS, Ł. ZYCH, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Kraków, Poland
16.30 Break
Chair: Begona FERRARI, Spain
17.00 CA-1:IL06 Sintering Investigations of UO2 and MOX Formulations: Mechanisms and Microstructure
G. BERNARD-GRANGER, CEA/DES/ISEC/DMRC/SPTC/LSEM & Université de Montpellier Centre de Marcoule, Bagnols sur Cèze, France
17.30 CA-1:IL07 Multiscale Microstructure Control of Ceramics Using Powder Assembly Techniques
HIROYUKI MUTO, Toyohashi University of Technology, Institute of Liberal Arts and Sciences, Department of Electrical and Electronics Information Engineering, Institute for Research on Next Generation Semiconductor and Sensing Science, Toyohashi, Japan
18.00 CA-1:L08 Computational Modeling of Cold Press Compaction in B4C Ceramic Powder
M.C. ŞİMŞEK, K. KAYA, Ş. RAKICI, M.B. ÜNAL, H.H. TÜRKMEN, Oğulbey Mah., Ankara, Türkiye
WEDNESDAY JUNE 17 MORNING
Room: SPOLETO A
Chair: Hiroyuki MUTO, Japan
8.30 CA-1:IL11 Colloidal Approach to the Additive Manufacturing of Cemented Carbides
A. MARTINEZ-BARJA, B. FERRARI, A. FERRANDEZ, A.J. SANCHEZ-HERENCIA, Institute for Ceramic and Glass, Madrid, Spain
9.00 CA-1:IL12 Different Powder Technology Routes for TZP Ceramics with Multiple Stabilizers
F. KERN, B. OSSWALD, University of Stuttgart, IKMT, Stuttgart, Germany
9.30 CA-1:L13 Synthesis of Monodispersed ZrC Nanoparticles Derived from MOF-801
YUN ZOU, H.J. LEE, S.H. LEE, Korea Institute of Materials Science, Changwon, Republic of Korea
9.50 CA-1:L14 Mechanical Destabilization Drives Thermally-activated Phase Transformation in Layered MAX Phases
B. RATZKER1,2, O. MESSER2, M. SOKOL2, 1Max Planck Institute for Sustainable Materials, Düsseldorf, Germany; 2Tel Aviv University, Israel
10.10 CA-1:L15 Understanding the Sintering of MOX Nuclear Fuels: Challenges Associated with the Characterization of a Multiphasic Microstructure
E. MOREL, F. LEBRETON, L. GAUTHIER, L. RAMOND, G. BERNARD-GRANGER, CEA, DES, ISEC, DMRC, Univ Montpellier, Marcoule, France; G. CUNHA COSTA MIRANDA, T. GENEVES, ORANO MELOX, Chusclan, France
10.30 Break
Chair: Monica FERRARIS, Italy
11.00 CA-1:L16 Enhanced Alumina Sintering Via Electrostatically Assembled Alumina Composite Particles
WAI KIAN TAN, KATSUMI FUJISHIRO, GO KAWAMURA, ATSUNORI MATSUDA, HIROYUKI MUTO, Toyohashi University of Technology, Toyohashi, Aichi, Japan
11.20 CA-1:L17 Structural and Optical Evolution of BaCuSi4O10 and BaCuSi2O6 Obtained through a Scalable, Cost-Effective Precipitation Process
M. BALAYAN, A. ISAHAKYAN, A. TERZYAN, H. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia; Yerevan State University, Yerevan, Armenia
11.40 CA-2:IL19 Automated Flow Reactors for the Controlled Synthesis of Functional Materials
J. DE MELLO, Norwegian Open Laboratory for High Throughput Experimentation and Scale-Up Norwegian University of Science and Technology, Trondheim, Norway
WEDNESDAY JUNE 17 AFTERNOON
Room: SPOLETO A
Chair: Thomas KONEGGER, Austria
15.00 CA-3:IL22 Ceramic Matrix Nanocomposites from Tailor-made Preceramic Polymers
S. BERNARD, CNRS, IRCER, UMR 7315, Univ. Limoges, Limoges, France
15.30 CA-3:IL23 Generation of Polymer-derived Ceramic Coatings on Light Metals via Laser Treatment
G. MOTZ, S. SCHAFFÖNER, A. HORCHER, University of Bayreuth, Ceramic Materials Engineering (CME), Bayreuth, Germany; K. TANGERMANN-GERK, Bayerisches Laserzentrum GmbH, Erlangen, Germany
16.00 CA-3:IL24 Polymer-derived Amorphous Silicon Nitride-Based Nanocomposites
YUJI IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
16.30 Break
Chair: Samuel BERNARD, France
17.00 CA-3:IL25 Polymer-derived Ceramics as Thermal and Environmental Barrier Coatings
N.-C. PETRY, M.C. GALETZ, DECHEMA research institute, Frankfurt, Germany; A.S. ULRICH, Metals and Alloys II, University of Bayreuth, Bayreuth, Germany; M. LEPPLE, Institute of Inorganic and Analytical Chemistry, Justus Liebig University Giessen, Giessen, Germany
17.30 CA-3:L27 Ultraviolet Curing of Polysilazane-based Coating System with Metallic Fillers
J.-F. WENDEL, A. FISCHER, S. SCHAFFÖNER, G. MOTZ, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany; D. LEYKAM, Chair of Electrochemical Process Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany
17.50 CA-6:IL45 Synthesis of Functional Electrochemical Materials from Inorganic–organic Hybrid Precursors
YOSHIYUKI SUGAHARA, School of Advanced Science and Engineering and Kagami Memorial Institute for Materials Science and Technology, Waseda University, Tokyo, Japan
(rescheduled at the request of the Presenting Author)
18.20 CA-3:L26 Synthesis, Constituents, and Processing Technologies for UHTCMCs
J.H. DELCAMP, L. RUESCHHOFF, Z. APOSTOLOV, M.B. DICKERSON, T.L. PRUYN, Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA
THURSDAY JUNE 18 MORNING
Room: SPOLETO A
Chair: Claude ESTOURNES, France
8.30 CA-4:IL28 Microwave Synthesis of MAX Phases and Beyond
V. JOSHI, C.S. BIRKEL, Arizona State University, Tempe, AZ, USA
9.00 CA-4:IL29 Microwave-assisted Catalysis Constructed at the Atomic Scale
FUMINAO KISHIMOTO, The University of Tokyo, Tokyo, Japan
9.30 CA-4:IL30 Microwave-assisted Chemical Vapor Infiltration of SiCf/SiC Composites: State-of-the-art and Recent Developments
R. D’AMBROSIO1, A. CINTIO1, A. LAZZERI1,2, G. ANNINO1, 1Istituto per i Processi Chimico-Fisici, IPCF-CNR, Pisa, Italy; 2Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy
10.00 CA-4:L31 Pressure-assisted Microwave Sintering of Lead Free Piezoelectric Ceramics
A. ONFROY, C. MANIERE, S. MARINEL, Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
10.20 Break
Chair: Christina BIRKEL, USA
10.50 CA-5:IL32 Cold Sintering of Functional Materials and Control of Grain Boundaries
C.A. RANDALL, Materials Research Institute, Department of Material Science and Engineering The Pennsylvania State University, University Park, PA, USA
11.20 CA-5:IL33 In Situ Analysis of Solid-liquid Interfaces during Cold Sintering Process through Impedance Spectroscopy
T. HERISSON DE BEAUVOIR, E. SANCHEZ, A. KORBI, N. ALBAR, C. ESTOURNÈS, CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France
11.50 CA-5:IL34 Cold Sintering of Electroceramics: Road to Solution or Troubles?
M. OTONIČAR1,2, M. LACHHAB1,2, A. ABASS SHAH1, A. LALAGUE-DARDANT1,3, S. SALMANOV1, D. KUŠČER1,2, B. MALIČ1,2, 1Jožef Stefan Institute, Electronic ceramics department, Ljubljana, Slovenia; 2Jožef Stefan International postgraduate school, Ljubljana, Slovenia; 3GREMAN laboratory, University of Tours, Blois, France
12.20 CA-5:IL35 Very High Heating Rate during Ceramic Sintering vs Conventionnal Sintering: Influence on Microstructure and Properties
C. ESTOURNÈS1, T. HERISSON DE BEAUVOIR1, E. MARTIN1, L. KARACASULU2, G. CHEVALLIER1, A. WEIBEL1, C. MANIÈRE3, M. BIESUZ2, 1CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France; 2University of Trento, Dept of Industrial Engineering, Trento, Italy; 3Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
THURSDAY JUNE 18 AFTERNOON
Room: SPOLETO A
Chair: Clive RANDALL, USA
15.00 CA-5:IL36 Fabrication of Transparent Oxide Ceramics by Spark-Plasma-Sintering
KOJI MORITA, National Institute for Materials Science (NIMS), Research Center for Electronic and Optical Materials, Polycrystalline Optical Material Group, Tsukuba, Japan
15.30 CA-5:L39 Fabrication of Boron-Rich Boron Carbide Ceramics (B10C) by Hybrid High-Energy Ball Milling and Reactive SPS
N. KESHTKAR, J. LOPEZ-ARENAL, B. MALMAL MOSHTAGHIOUN, D. GOMEZ-GARCÍA, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Sevilla, Spain
15.50 CA-5:IL41 Low-temperature Chemical Densification of Ceramic Membranes for Electrochemical Devices
YUKI YAMAGUCHI, National Institute of Advance Industrial Science and Technology (AIST), Nagoya, Japan
16.20 Break
16.50 CA-5:L43 Design of Porous Silica Compacts via Cold Sintering Process
SHIORI NAWA1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
17.10 CA-5:L44 Spontaneous Crystallization of Amorphous SiC
T. AYVAZYAN1, M. ZAKARYAN1, K. NAZARETYAN1, K. MANUKYAN2, S. KHARATYAN1, 1Laboratory of Macrokinetics of Solid State Reactions, Institute of Chemical Physics NAS of Armenia, Yerevan, Armenia; 2Nuclear Science Laboratory, Department of Physics and Astronomy, University of Notre Dame, Notre Dame, IN, USA
FRIDAY JUNE 19 MORNING
Room: SPOLETO A
Chair: Yuki YAMAGUCHI, Japan
9.30 CA-6:IL46 Additive Manufacturing of Zirconia-based Multi-material Components with Improved Mechanical Resistance
FEI ZHANG1,2, JUNHUI ZHANG1,2, B. NEIRINCK3, J. VLEUGELS1, 1KU Leuven, Department of Materials Engineering, Leuven, Belgium; 2KU Leuven, Department of Oral Health Sciences, BIOMAT -Biomaterials Research group & UZ Leuven, Dentistry, Leuven, Belgium; 3Schaeffler Aerosint SA, Herstal, Belgium
10.00 CA-6:L47 Room-Temperature Crack Healing of TiC Ceramics via Electrochemical Process and its Mechanism
JINYU LIU1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
10.20 CA-7:L48 Synthesis of Non-stoichiometric High-entropy Carbides and Carbohydrides based on Transition Metals of Groups 4 and 5 (Ti-Zr-Hf-V-Nb)
A. HOVHANNISYAN1, S. DOLUKHANYAN1, O. TER-GALSTYAN1, N. MNATSAKANYAN1, G. MURADYAN1, E. VARDANYAN1, S. KHASANOV2, S. MARDANYAN3, 1A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, Yerevan, Armenia; 2Y.A. Osipyan Institute of Solid-State Physics, Russian Academy of Sciences, Chernogolovka, Moscow district, Russia; 3H. Buniatian Institute of Biochemistry of Armenian NAS, Yerevan, Armenia
10.40 Break
Chair: Mojca OTONICAR, Slovenia
11.10 CA-7:L49 The Influence of Hydrogen on the Process of (TiNb)2AlC MAX phase Formation by Self-propagating High-temperature Synthesis (SHS) and Hydride Cycle (HC) Methods
G. MURADYAN1, S. DOLUKHANYAN1, O. TER-GALSTYAN1, N. MNATSAKANYAN1, S. MARDANYAN2, A. HOVHANNISYAN1, 1A.B. Nalbandyan Institute of Chemical Physics of NAS RA, Yerevan, Republic of Armenia; 2H.Kh. Buniatian Institute of Biochemistry of NAS RA, Yerevan, Republic of Armenia
11.30 CA-7:L50 Ti2AlB MAX Phase and MXene Derivative Prepared by Self-Propagating High-Temperature Synthesis
N. AMIRKHANYAN¹, M.A. RODRIGUEZ², J. ROSEN³, S. AYDINYAN¹, S. KHARATYAN1,4, ¹A.B. Nalbandyan Institute of Chemical Physics, NAS RA, Yerevan, Armenia; ²Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain; ³Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden; 4Tallinn University of Technology, Tallinn, Estonia
11.50 CA-8:IL52 Solid-state Field-assisted Ion Exchange of Ag in Lithium Aluminum Silicate Glass-ceramics
M. BIESUZ, V.M. SGLAVO, G.D. SORARÙ, Department of Industrial Engineering, University of Trento, Trento, Italy
FRIDAY JUNE 19 AFTERNOON
Room: SPOLETO A
Chair: Monica FERRARIS, Italy
14.30 CA-2:IL20 Transition-Metal Ceramic Electrocatalysts with Bifunctional Activity for Aqueous Zinc-Air Batteries
J. GONZÁLEZ-MORALES¹, M. APARICIO¹, J. MOSA¹, ¹Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
(rescheduled at the request of the Presenting Author)
15.00 CA-9:IL53 Light-assisted Solidification Templating of Preceramic Polymers towards Porous Ceramic CO2 Utilization Frameworks
T. KONEGGER, K. RAUCHENWALD, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
15.30 CA-9:IL54 High-Pressure Synthesis and Crystal Chemistry of Novel Functional Transition-Metal Silicides
T. SASAKI, T. KITAHARA, K. NIWA, M. HASEGAWA, Department of Materials Physics, Nagoya University, Nagoya, Aichi, Japan
16.00 CA-9:IL55 In-situ Exploration of New Materials under Extreme Conditions using the Large Volume Press at beamline P61B DESY
S. BHAT, Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany
16.30 CA-9:IL56 Using Cellulose Nanofibers as Polymeric Support and Biotemplate of Photocatalytic Nanophases to Shape 3D Advanced Structures
Z. GONZÁLEZ1,2, J.M. LUQUE1, G. ESTRELLA-GUISADO1, R. MONTENEGRO1,2, P. ORTEGA-COLUMBRANS3,4, A. RODRÍGUEZ1,2, B. FERRARI2,3, 1BioPrEn Group (RNM-940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, Córdoba, Spain; 2Unidad Asociada CSIC-UCO, Fabricación aditiva de materiales compuestos basados en celulosa funcionalizada, obtenida de residuos de biomasa, Spain; 3Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, Madrid, Spain; 4COLFEED4Print S.L., Tres Cantos, Madrid, Spain
Room: SPOLETO A
Chair: Monica FERRARIS, Italy (Convener)
14.25 Welcome
14.30 CA-1:IL01 From Droplet Evolution to Activity: Process–Structure–Property Design via Glatt Powder Synthesis
J. BUCHHEIM, V. DRESCHER, T. VOCKENBERG, Glatt Ingenieurtechnik Gmbh, Weimar, Germany
15.00 CA-1:IL02 Synthesis of Aerogels as Functional Ceramics: Routes to Improved Thermal Stability
J.A. KROGSTAD, University of Illinois Urbana Champaign, Urbana, IL, USA
15.30 CA-1:L03 Application of Radiation-Thermal Sintering of Deposited Functional Layers of Structured Catalysts, Membranes and Solid Oxide Fuel Cells
Y. BESPALKO1, N. EREMEEV1, O. BULAVCHENKO1, E. SUPRUN, M. MIKHAILENKO2, M. KOROBEYNIKOV3, V. SADYKOV1, 1Federal Research Center Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia; 2Institute of Solid State Chemistry and Mechanochemistry SB RAS, Novosibirsk, Russia; 3Budker Institute of Nuclear Physics SB RAS, Novosibirsk, Russia
15.50 CA-1:L04 Alternative Methods for the Calibration of the Drucker-Prager/Cap Model, Application to the MOX Fuel Shaping
B. SPANU1, T. REBILLON1, J. P. BAYLE1, A. SOCIÉ2, T. HELFER2, G. BERNARD-GRANGER1, 1CEA, DES, ISEC, DMRC, Univ. Montpellier, Marcoule, France; 2CEA, DES, IRESNE, DEC, Saint-Paul-lez-Durance, France
16.10 CA-1:L05 Application of the Heterocoagulation Phenomenon in Reactive Sintering of MgAl2O4 and Production of MgAl2O4- Al2O3 Composites
O. JURECKA, K. KORNAUS, Ł. ZYCH, AGH University of Krakow, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Kraków, Poland
16.30 Break
Chair: Begona FERRARI, Spain
17.00 CA-1:IL06 Sintering Investigations of UO2 and MOX Formulations: Mechanisms and Microstructure
G. BERNARD-GRANGER, CEA/DES/ISEC/DMRC/SPTC/LSEM & Université de Montpellier Centre de Marcoule, Bagnols sur Cèze, France
17.30 CA-1:IL07 Multiscale Microstructure Control of Ceramics Using Powder Assembly Techniques
HIROYUKI MUTO, Toyohashi University of Technology, Institute of Liberal Arts and Sciences, Department of Electrical and Electronics Information Engineering, Institute for Research on Next Generation Semiconductor and Sensing Science, Toyohashi, Japan
18.00 CA-1:L08 Computational Modeling of Cold Press Compaction in B4C Ceramic Powder
M.C. ŞİMŞEK, K. KAYA, Ş. RAKICI, M.B. ÜNAL, H.H. TÜRKMEN, Oğulbey Mah., Ankara, Türkiye
WEDNESDAY JUNE 17 MORNING
Room: SPOLETO A
Chair: Hiroyuki MUTO, Japan
8.30 CA-1:IL11 Colloidal Approach to the Additive Manufacturing of Cemented Carbides
A. MARTINEZ-BARJA, B. FERRARI, A. FERRANDEZ, A.J. SANCHEZ-HERENCIA, Institute for Ceramic and Glass, Madrid, Spain
9.00 CA-1:IL12 Different Powder Technology Routes for TZP Ceramics with Multiple Stabilizers
F. KERN, B. OSSWALD, University of Stuttgart, IKMT, Stuttgart, Germany
9.30 CA-1:L13 Synthesis of Monodispersed ZrC Nanoparticles Derived from MOF-801
YUN ZOU, H.J. LEE, S.H. LEE, Korea Institute of Materials Science, Changwon, Republic of Korea
9.50 CA-1:L14 Mechanical Destabilization Drives Thermally-activated Phase Transformation in Layered MAX Phases
B. RATZKER1,2, O. MESSER2, M. SOKOL2, 1Max Planck Institute for Sustainable Materials, Düsseldorf, Germany; 2Tel Aviv University, Israel
10.10 CA-1:L15 Understanding the Sintering of MOX Nuclear Fuels: Challenges Associated with the Characterization of a Multiphasic Microstructure
E. MOREL, F. LEBRETON, L. GAUTHIER, L. RAMOND, G. BERNARD-GRANGER, CEA, DES, ISEC, DMRC, Univ Montpellier, Marcoule, France; G. CUNHA COSTA MIRANDA, T. GENEVES, ORANO MELOX, Chusclan, France
10.30 Break
Chair: Monica FERRARIS, Italy
11.00 CA-1:L16 Enhanced Alumina Sintering Via Electrostatically Assembled Alumina Composite Particles
WAI KIAN TAN, KATSUMI FUJISHIRO, GO KAWAMURA, ATSUNORI MATSUDA, HIROYUKI MUTO, Toyohashi University of Technology, Toyohashi, Aichi, Japan
11.20 CA-1:L17 Structural and Optical Evolution of BaCuSi4O10 and BaCuSi2O6 Obtained through a Scalable, Cost-Effective Precipitation Process
M. BALAYAN, A. ISAHAKYAN, A. TERZYAN, H. BEGLARYAN, Institute of General and Inorganic Chemistry of the NAS RA, Yerevan, Armenia; Yerevan State University, Yerevan, Armenia
11.40 CA-2:IL19 Automated Flow Reactors for the Controlled Synthesis of Functional Materials
J. DE MELLO, Norwegian Open Laboratory for High Throughput Experimentation and Scale-Up Norwegian University of Science and Technology, Trondheim, Norway
WEDNESDAY JUNE 17 AFTERNOON
Room: SPOLETO A
Chair: Thomas KONEGGER, Austria
15.00 CA-3:IL22 Ceramic Matrix Nanocomposites from Tailor-made Preceramic Polymers
S. BERNARD, CNRS, IRCER, UMR 7315, Univ. Limoges, Limoges, France
15.30 CA-3:IL23 Generation of Polymer-derived Ceramic Coatings on Light Metals via Laser Treatment
G. MOTZ, S. SCHAFFÖNER, A. HORCHER, University of Bayreuth, Ceramic Materials Engineering (CME), Bayreuth, Germany; K. TANGERMANN-GERK, Bayerisches Laserzentrum GmbH, Erlangen, Germany
16.00 CA-3:IL24 Polymer-derived Amorphous Silicon Nitride-Based Nanocomposites
YUJI IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
16.30 Break
Chair: Samuel BERNARD, France
17.00 CA-3:IL25 Polymer-derived Ceramics as Thermal and Environmental Barrier Coatings
N.-C. PETRY, M.C. GALETZ, DECHEMA research institute, Frankfurt, Germany; A.S. ULRICH, Metals and Alloys II, University of Bayreuth, Bayreuth, Germany; M. LEPPLE, Institute of Inorganic and Analytical Chemistry, Justus Liebig University Giessen, Giessen, Germany
17.30 CA-3:L27 Ultraviolet Curing of Polysilazane-based Coating System with Metallic Fillers
J.-F. WENDEL, A. FISCHER, S. SCHAFFÖNER, G. MOTZ, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany; D. LEYKAM, Chair of Electrochemical Process Engineering, University of Bayreuth, Bayreuth, Bavaria, Germany
17.50 CA-6:IL45 Synthesis of Functional Electrochemical Materials from Inorganic–organic Hybrid Precursors
YOSHIYUKI SUGAHARA, School of Advanced Science and Engineering and Kagami Memorial Institute for Materials Science and Technology, Waseda University, Tokyo, Japan
(rescheduled at the request of the Presenting Author)
18.20 CA-3:L26 Synthesis, Constituents, and Processing Technologies for UHTCMCs
J.H. DELCAMP, L. RUESCHHOFF, Z. APOSTOLOV, M.B. DICKERSON, T.L. PRUYN, Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA
THURSDAY JUNE 18 MORNING
Room: SPOLETO A
Chair: Claude ESTOURNES, France
8.30 CA-4:IL28 Microwave Synthesis of MAX Phases and Beyond
V. JOSHI, C.S. BIRKEL, Arizona State University, Tempe, AZ, USA
9.00 CA-4:IL29 Microwave-assisted Catalysis Constructed at the Atomic Scale
FUMINAO KISHIMOTO, The University of Tokyo, Tokyo, Japan
9.30 CA-4:IL30 Microwave-assisted Chemical Vapor Infiltration of SiCf/SiC Composites: State-of-the-art and Recent Developments
R. D’AMBROSIO1, A. CINTIO1, A. LAZZERI1,2, G. ANNINO1, 1Istituto per i Processi Chimico-Fisici, IPCF-CNR, Pisa, Italy; 2Department of Civil and Industrial Engineering, University of Pisa, Pisa, Italy
10.00 CA-4:L31 Pressure-assisted Microwave Sintering of Lead Free Piezoelectric Ceramics
A. ONFROY, C. MANIERE, S. MARINEL, Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
10.20 Break
Chair: Christina BIRKEL, USA
10.50 CA-5:IL32 Cold Sintering of Functional Materials and Control of Grain Boundaries
C.A. RANDALL, Materials Research Institute, Department of Material Science and Engineering The Pennsylvania State University, University Park, PA, USA
11.20 CA-5:IL33 In Situ Analysis of Solid-liquid Interfaces during Cold Sintering Process through Impedance Spectroscopy
T. HERISSON DE BEAUVOIR, E. SANCHEZ, A. KORBI, N. ALBAR, C. ESTOURNÈS, CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France
11.50 CA-5:IL34 Cold Sintering of Electroceramics: Road to Solution or Troubles?
M. OTONIČAR1,2, M. LACHHAB1,2, A. ABASS SHAH1, A. LALAGUE-DARDANT1,3, S. SALMANOV1, D. KUŠČER1,2, B. MALIČ1,2, 1Jožef Stefan Institute, Electronic ceramics department, Ljubljana, Slovenia; 2Jožef Stefan International postgraduate school, Ljubljana, Slovenia; 3GREMAN laboratory, University of Tours, Blois, France
12.20 CA-5:IL35 Very High Heating Rate during Ceramic Sintering vs Conventionnal Sintering: Influence on Microstructure and Properties
C. ESTOURNÈS1, T. HERISSON DE BEAUVOIR1, E. MARTIN1, L. KARACASULU2, G. CHEVALLIER1, A. WEIBEL1, C. MANIÈRE3, M. BIESUZ2, 1CIRIMAT, Université de Toulouse, Toulouse INP, CNRS, Toulouse cedex, France; 2University of Trento, Dept of Industrial Engineering, Trento, Italy; 3Université Caen Normandie, ENSICAEN, CNRS, Normandie Univ, CRISMAT UMR6508, Caen, France
THURSDAY JUNE 18 AFTERNOON
Room: SPOLETO A
Chair: Clive RANDALL, USA
15.00 CA-5:IL36 Fabrication of Transparent Oxide Ceramics by Spark-Plasma-Sintering
KOJI MORITA, National Institute for Materials Science (NIMS), Research Center for Electronic and Optical Materials, Polycrystalline Optical Material Group, Tsukuba, Japan
15.30 CA-5:L39 Fabrication of Boron-Rich Boron Carbide Ceramics (B10C) by Hybrid High-Energy Ball Milling and Reactive SPS
N. KESHTKAR, J. LOPEZ-ARENAL, B. MALMAL MOSHTAGHIOUN, D. GOMEZ-GARCÍA, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Sevilla, Spain
15.50 CA-5:IL41 Low-temperature Chemical Densification of Ceramic Membranes for Electrochemical Devices
YUKI YAMAGUCHI, National Institute of Advance Industrial Science and Technology (AIST), Nagoya, Japan
16.20 Break
16.50 CA-5:L43 Design of Porous Silica Compacts via Cold Sintering Process
SHIORI NAWA1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
17.10 CA-5:L44 Spontaneous Crystallization of Amorphous SiC
T. AYVAZYAN1, M. ZAKARYAN1, K. NAZARETYAN1, K. MANUKYAN2, S. KHARATYAN1, 1Laboratory of Macrokinetics of Solid State Reactions, Institute of Chemical Physics NAS of Armenia, Yerevan, Armenia; 2Nuclear Science Laboratory, Department of Physics and Astronomy, University of Notre Dame, Notre Dame, IN, USA
FRIDAY JUNE 19 MORNING
Room: SPOLETO A
Chair: Yuki YAMAGUCHI, Japan
9.30 CA-6:IL46 Additive Manufacturing of Zirconia-based Multi-material Components with Improved Mechanical Resistance
FEI ZHANG1,2, JUNHUI ZHANG1,2, B. NEIRINCK3, J. VLEUGELS1, 1KU Leuven, Department of Materials Engineering, Leuven, Belgium; 2KU Leuven, Department of Oral Health Sciences, BIOMAT -Biomaterials Research group & UZ Leuven, Dentistry, Leuven, Belgium; 3Schaeffler Aerosint SA, Herstal, Belgium
10.00 CA-6:L47 Room-Temperature Crack Healing of TiC Ceramics via Electrochemical Process and its Mechanism
JINYU LIU1, YEONGJUN SEO1, YOSHIFUMI KONDO1, TOMOYO GOTO1,2, TOHRU SEKINO1, 1SANKEN, The University of Osaka, Ibaraki, Osaka, Japan; 2Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma, Nara, Japan
10.20 CA-7:L48 Synthesis of Non-stoichiometric High-entropy Carbides and Carbohydrides based on Transition Metals of Groups 4 and 5 (Ti-Zr-Hf-V-Nb)
A. HOVHANNISYAN1, S. DOLUKHANYAN1, O. TER-GALSTYAN1, N. MNATSAKANYAN1, G. MURADYAN1, E. VARDANYAN1, S. KHASANOV2, S. MARDANYAN3, 1A.B. Nalbandyan Institute of Chemical Physics of Armenian NAS, Yerevan, Armenia; 2Y.A. Osipyan Institute of Solid-State Physics, Russian Academy of Sciences, Chernogolovka, Moscow district, Russia; 3H. Buniatian Institute of Biochemistry of Armenian NAS, Yerevan, Armenia
10.40 Break
Chair: Mojca OTONICAR, Slovenia
11.10 CA-7:L49 The Influence of Hydrogen on the Process of (TiNb)2AlC MAX phase Formation by Self-propagating High-temperature Synthesis (SHS) and Hydride Cycle (HC) Methods
G. MURADYAN1, S. DOLUKHANYAN1, O. TER-GALSTYAN1, N. MNATSAKANYAN1, S. MARDANYAN2, A. HOVHANNISYAN1, 1A.B. Nalbandyan Institute of Chemical Physics of NAS RA, Yerevan, Republic of Armenia; 2H.Kh. Buniatian Institute of Biochemistry of NAS RA, Yerevan, Republic of Armenia
11.30 CA-7:L50 Ti2AlB MAX Phase and MXene Derivative Prepared by Self-Propagating High-Temperature Synthesis
N. AMIRKHANYAN¹, M.A. RODRIGUEZ², J. ROSEN³, S. AYDINYAN¹, S. KHARATYAN1,4, ¹A.B. Nalbandyan Institute of Chemical Physics, NAS RA, Yerevan, Armenia; ²Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain; ³Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden; 4Tallinn University of Technology, Tallinn, Estonia
11.50 CA-8:IL52 Solid-state Field-assisted Ion Exchange of Ag in Lithium Aluminum Silicate Glass-ceramics
M. BIESUZ, V.M. SGLAVO, G.D. SORARÙ, Department of Industrial Engineering, University of Trento, Trento, Italy
FRIDAY JUNE 19 AFTERNOON
Room: SPOLETO A
Chair: Monica FERRARIS, Italy
14.30 CA-2:IL20 Transition-Metal Ceramic Electrocatalysts with Bifunctional Activity for Aqueous Zinc-Air Batteries
J. GONZÁLEZ-MORALES¹, M. APARICIO¹, J. MOSA¹, ¹Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
(rescheduled at the request of the Presenting Author)
15.00 CA-9:IL53 Light-assisted Solidification Templating of Preceramic Polymers towards Porous Ceramic CO2 Utilization Frameworks
T. KONEGGER, K. RAUCHENWALD, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
15.30 CA-9:IL54 High-Pressure Synthesis and Crystal Chemistry of Novel Functional Transition-Metal Silicides
T. SASAKI, T. KITAHARA, K. NIWA, M. HASEGAWA, Department of Materials Physics, Nagoya University, Nagoya, Aichi, Japan
16.00 CA-9:IL55 In-situ Exploration of New Materials under Extreme Conditions using the Large Volume Press at beamline P61B DESY
S. BHAT, Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany
16.30 CA-9:IL56 Using Cellulose Nanofibers as Polymeric Support and Biotemplate of Photocatalytic Nanophases to Shape 3D Advanced Structures
Z. GONZÁLEZ1,2, J.M. LUQUE1, G. ESTRELLA-GUISADO1, R. MONTENEGRO1,2, P. ORTEGA-COLUMBRANS3,4, A. RODRÍGUEZ1,2, B. FERRARI2,3, 1BioPrEn Group (RNM-940), Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Faculty of Science, Universidad de Córdoba, Córdoba, Spain; 2Unidad Asociada CSIC-UCO, Fabricación aditiva de materiales compuestos basados en celulosa funcionalizada, obtenida de residuos de biomasa, Spain; 3Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, Madrid, Spain; 4COLFEED4Print S.L., Tres Cantos, Madrid, Spain