Poster Presentations
C:P01 Effect of Calcination Temperature on Characterization of Natural Hydroxyapatite Prepared from Bovine Bones
A. AZZI, A. GRAIRIA, A. MEBREK, H. REZZEG, Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria
C:P02 The High-pressure Sintered TiAl-Ti2B Composites
V. MAKSIMOVIĆ1, V. URBANOVICH2, J. MALETAŠKIĆ1, V. PAVKOV1, I. CVIJOVIĆ-ALAGIĆ1, 1Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia; 2SSPA “Scientific-Practical Materials Research Centre of NAS of Belarus”, Minsk, Belarus
C:P03 Data-Driven AI Platform for Standardized Ceramic Materials
HANEUL KIM, HYUNSEOK KO, Korea Institute of Ceramic Engineering and Technology (KICET), Jinju, Republic of Korea
C:P04 Development of Short Fiber Reinforced C-SiC using Recycled Industrial Carbon Fiber
D. DORN, R. GOLLER, Technical University of Applied Sciences Augsburg, Augsburg, Germany; D. KOCH, University of Augsburg, Augsburg, Germany
C:P05 Everglass Database: Development of a Python-Based Tool for Visualization of Glass Properties and Modelling Applications
G. GORNI, M.J. PASCUAL, Ceramics and Glass Institute, CSIC, Madrid, Spain; A. EISENTRÄGER, J. KUHNERT, Fraunhofer ITWM, Kaiserslautern, Germany; R. COMESAÑA, J. POU, LaserON, CINTECX, University of Vigo, Vigo, Spain
C:P06 Eco-Friendly Ceramic 3D Printing via Selective Reaction Hardening of Alginic Acid–Based Low-Polymer Slurries
JEONGHONG HA, JUNGSUB KIM, JONG WAN KO, Korea Institute of Industrial Technology, Ulsan, South Korea
C:P07 3D Printing by PBF-LB/M to Obtain a Biodegradable Mg based Multi Material
D. RADUCANU1, V.D. COJOCARU1, R.E. HENDEA2, A. NOCIVIN3, D. STANCIU2, M.E. COJOCARU1, N. ZARNESCU1, 1POLITEHNICA University of Bucharest, Bucharest, Romania; 2ZIRCON DENT SRL, Cluj Napoca, Romania; 3OVIDIUS University of Constanta, Constanta, Romania
C:P08 Binder-jetted Porous Al2O3 Scaffolds with Selective Metal Infiltration for Functionally Graded Metal-Ceramic Composites
KYUNG IL KIM, Korea Institute of Industrial Technology, Incheon, South Korea
C:P09 Numerical and Experimental Analysis of Slot-Die Coating Stability and Substrate Wettability for Slurry-Based Ceramic Additive Manufacturing
JEONGHONG HA, 3D Printing Manufacturing Process Center, Korea Institute of Industrial Technology (KITECH), Ulsan, Republic of Korea
C:P10 Pellet-based FDM (Fused Deposition Modeling) Fabrication of Alumina Components for Metallurgical Applications – The Influence of Feedstock Compositions
XIAN WU1, F. BULLING2, C.G. ANEZIRIS1, 1TU Bergakademie Freiberg, Germany; 2fem Forschungsinstitut, Germany
C:P11 Joule Heating-assisted Joining of Additively Manufactured Ceramics
F.C. NUNES1, P.A. LANÇONI1, H.E. ARAÚJO1,2, J.V. CAMPOS3, J.K.M.B. DAGUANO4, E.M.J.A. PALLONE1, 1University of São Paulo (USP/FZEA), Pirassununga, Brazil; 2Federal Institute of Education, Science and Technology of São Paulo (IFSP), Hortolândia, Brazil. 3Federal University of São Carlos (UFSCar), São Carlos, Brazil; 4CTI Renato Archer, Campinas, Brazil
C:P12 Joining Alumina to the Inconel®625 alloy by Hot Pressing (HP)
B. CONTRI, S. VALETTE, P. LEFORT, IRCER (European Ceramics Center), UMR CNRS 7315, University of Limoges, Limoges, France
C:P13 Glass-ceramic Sealing Layers for the Integration of Oxygen Transport Membranes in Planar Devices
P. FEDELI, S. DE LA PIERRE, A. CAMMI, A. CAVALIERE, V. NIGRONI, V. MARZAROLI, E. MALGRATI, M. FERRARIS, Ricerca sul Sistema Energetico - RSE SpA, Milano, Italy
C:P14 Electrocatalytic Properties Evaluation of FeNiMoWCuN High Entropy Alloy Thin Films Fabricated by Magnetron Sputtering: Effect of Nitrogen Contents
BIH-SHOW LOU1,2, GAO-ZHENG DAI3, JYH-WEI LEE3,4,5,6, 1Chemistry Division, Center for General Education, Chang Gung University, Taoyuan, Taiwan; 2Department of Orthopaedic Surgery, New Taipei Municipal TuCheng Hospital, Chang Gung Memorial Hospital, Taiwan; 3Department of Materials Engineering, Ming Chi University of Technology, New Taipei, Taiwan; 4Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei, Taiwan; 5College of Engineering, Chang Gung University, Taoyuan, Taiwan; 6High Entropy Materials Center, National Tsing Hua University, Hsinchu, Taiwan
C:P15 Controlled Oxidation of Ultraflat Single-crystalline Cu Thin Films grown by Atomic Sputtering Epitaxy
SU JAE KIM1, SANG-EON PARK1,2, SE-YOUNG JEONG3,4, 1Crystal Bank research Institute, Pusan National University, Busan, Korea; 2Korea Quantum Matter Core-Facility, Pusan National University, Busan, Korea; 3School of Transdisciplinary Engineering, Pusan National University, Busan, Korea; 4Department of Physics, KAIST, Deajeon, Korea
C:P16 Stream-Jet Coating for High-Throughput Fabrication of Low-Pt PEMFC Catalyst Layers
SHIN AE SONG, HYUN A CHO, SANG-HO LEE, Korea Institute of Industrial Technology, Ansan, Republic of Korea
C:P17 ALD-Engineered Surface Modification of PEMFC Catalyst Layers for Enhanced Water Management under Low-Humidity Conditions
HYUN A. CHO, SUNG NAM LIM, JU YOUNG WOO, JEONG-CHEOL SEO, SHIN AE SONG, Korea Institute of Industrial Technology (KITECH), Hanyang University, Ansan, Republic of Korea
C:P18 Preparation of Porous Anode Electrode for Solid Oxide Fuel Cell
I-MING HUNG1,2, JU-YU HUNG1, D. MOHANTY1, 1Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan City, Taiwan; 2Hierarchical Green-Energy Materials (Hi-GEM) Research Center, National Cheng Kung University, Tainan, Taiwan
C:P19 Printing graphene by thermal extrusion
B. FERRARI1, S. WISIKE2, P. ORTEGA-COLUMBRANS2, A. FERRÁNDEZ-MONTERO1, Z. GONZÁLEZ3,4, A.J. SÁNCHEZ-HERENCIA1, 1Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, Madrid, Spain; 2COLFEED4Print S.L. (Technological spin-off of the Colloidal Processing group of the Spanish National Research Council (CSIC)), Tres Cantos (Madrid), Spain; 3BioPrEn Group, Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Universidad de Córdoba, Córdoba, Spain; 4Unidad Asociada CSIC-UCO, Fabricación Aditiva de Materiales Compuestos Basados en Celulosa Funcionalizada, Obtenida de Residuos de Biomasa, Córdoba, Spain
C:P20 Coating Behavior and Adhesion Strength of CVD Processed HfC-HfB2 Layers
BYUNG-HYUK JUN, SUBHIN PARK, JISU LEE, DAEJONG KIM, HYEON-GEUN LEE, Materials Safety Technology Research Division, Korea Atomic Energy Research Institute, Daejeon, Republic of Korea; HYUN JUN RYU, SANHA KIM, Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea
C:P21 Thermal diffusivity of (Hf0.5Zr0.5)B2-xSiC Ultra High Temperature Ceramics (UHTCs) exposed to Oxy-Acetylene Torch (OAT) test
M. BUCONI, M. NATALI, L. TORRE, R. ORRÙ, R. LICHERI, M. CASU, G. CAO, M. RALLINI, Terni, Italy
C:P22 Feasibility of Direct Ink Writing for the Additive Manufacturing of Ceramic Matrix Composites for High-Temperature Applications
A. DE ZANET1, R. GIOMETTI2, A. DE MARZI2, G. FRANCHIN2, P. COLOMBO2, A. KUMAR1, 1Leonardo Innovation Hub, Advanced Materials Lab, Leonardo S.p.A., Roma, Lazio, Italy; 2Department of Industrial Engineering, Università degli Studi di Padova, Padova, Italy
C:P23 Fabrication, Mechanical and Oxidation Properties of Ultra High Temperature (Ti0.2Zr0.2Hf0.2Mo0.2W0.2)B2-based Ceramics
M. CASU1, A. MARIO LOCCI1, G. CAO1, S. GARRONI2, R. ORRU1, 1Department of Mechanical, Chemical, and Materials Engineering, University of Cagliari, Cagliari, Italy; 2Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Sassari, Italy
C:P24 Mechanical and Tribological Performance of SiC/NbC Ceramic Composites Fabricated by Conventional and Reactive Processing
R. SEDLÁK, V. PUCHÝ, M. HRUBOVČÁKOVÁ, L. ĎAKOVÁ, I. SHEPA, A. KOVALČÍKOVÁ, P. HVIŠČOVÁ, O. PETRUŠ, T. CSANÁDI, Institute of Materials Research, Slovak Academy of Sciences, Division of Ceramic and Non-Metallic Systems, Košice, Slovak Republic
C:P25 Evolution of Microstructure and Mechanical Performance in Ultra-high Temperature Binary Carbide Systems
A. KOVALČÍKOVÁ, M. HRUBOVČÁKOVÁ, L. ĎAKOVÁ, R. SEDLÁK, D. ALBOV, P. HVIŠČOVÁ, O. PETRUŠ, T. CSANÁDI, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovak Republic
C:P26 High-Entropy Multi-Element Doping of LLZO for Room-Temperature Cubic Stabilization and Enhanced Li-Ion Conductivity
GYURI LEE, KYUNGSUN KIM, HAEJIN HWANG, Dep. of Mater. Sci. & Eng., Inha University, Incheon, South Korea
C:P27 Processing and Structure of High Entropy Electrolytes
M. BIESUZ, University of Trento Levent Karacasulu, University of Trento; A. SARKAR, Indian Institute of Technology Delhi, India
C:P28 Investigation of Novel High-Entropy Rare-Earth Aluminium Garnets
D. VISTORSKAJA, A. KATELNIKOVAS, A. KAREIVA, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Vilnius, Lithuania
C:P29 High-entropy Titanate Based Perovskite Oxides for Capacitive Energy Storage
A. PARYAB, V. SHVARTSMAN, D. LUPASCU, University of Duisburg-Essen, Essen, Germany
C:P30 In Situ Synthesis of MXene-Perovskite Interfaces in 3D Carbon Catalysts Boosts Aerobic Oxime Oxidation
E. ROMERO SALICIO, A. ANOUAR, H. GARCÍA, A. PRIMO, Universidad Politecnica de Valencia, Intituto de Tecnologia Quimica, Valencia, Spain
C:P31 Fe‑Engineered Mo2C MXene for Efficient Electrochemical NH3 Production
S.E. MIDRÉ, LIANG TIAN, H. GARCÍA, S. GOBERNA-FERRÓN, A. PRIMO, Instituto de Tecnología Química, CSIC-UPV, Valencia, Spain
C:P32 Vibrational Properties of Ti3C2T2 (T = Cl, Br) MXenes
M. RIABOV, H. ROUSSEL, T. OUISSE, H. PAZNIAK, UGA, CNRS, Grenoble INP, LMGP, Grenoble Cedex 1, France; A. CHAMPAGNE, ICMCB, CNRS, Pessac Cedex, Bordeaux, France
C:P33 A Comprehensive Framework for Surface Energy Calculations: Bridging Theoretical and Experimental Predictions from Layered van der Waals Solids to MXenes
G. RIBEIRO PORTUGAL1, NINGJUN CHEN1, Y. GOGOTSI2,3, J. ROSEN1,3, 1Materials Design, Department of Physics, Chemistry and Biology (IFM), Linköping University, Sweden; 2A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, USA; 3Wallenberg Initiative Materials Science for Sustainability (WISE), Linköping University, Sweden
C:P34 Rapid and Selective Detection of Metal Ions with a Gold-MXene Plasmonic Interface for Water Quality
S. ALI1, O. GOGOTSI2, A. RAMANAVICIUS3, S. RAMANAVICIUS1, 1Department of Electrochemical Material Science, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania; 2Materials Research Center, Kyiv, Ukraine; 3Department of Nanotechnology, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania
C:P35 EMI Shielding and Rheological Properties of MXene-magnetic Particle Composites Dispersed in an Epoxy Matrix
B.W. LEE, YOUNG-SEOK KIM, Korea Electronics Technology Institute, South Korea; I.S. HWANG, J.W. LEE, B.G. CHO, NOROO Paint & Coatings, South Korea
C:P36 Mitigating Kinetic Asymmetry in Lithium-rich Transition Metal Oxides through Disorder-engineered Structures for Lithium-ion Batteries
KYOJIN KU, Department of Materials Science and Engineering, Hanbat National University, Daejeon, Korea
C:P37 Unique All-Paper Dye-Sensitized Solar Cell Enabled by Carbon Nanotube Composite Paper
YI KOU1, TAKAHIDE OYA1,2, 1Graduate School of Engineering Science, Yokohama National University, Yokohama, Japan; 2Semiconductor and Quantum Integrated Electronics Research Center, Institute for Multidisciplinary Sciences, Yokohama National University, Yokohama, Japan
C:P38 A Study on the Thermodynamic Properties of CO2 for Storage and Transport
SEUNGMIN LEE, Korea Institute of Industrial Technology, Busan, Republic of Korea
C:P39 Study on Carbon Particle Capture in Methane/Hydrogen Flames Using Electric Fields
DAE GEUN PARK, Korea Institute of Industrial Technology, Cheonan-shi, Republic of Korea
C:P40 Engineered Interlayers as Robust Polysulfide Barriers in Lithium–Sulfur Batteries
DOOHUN KIM, JUN-WOO PARK, SE WON HAN, GEON-WOONG LEE, Korea Electrotechnology Research Institute, Changwon, Republic of Korea
C:P41 Oxygen-Functionalized SWCNT Scaffolds Enabling Ultra-Flexible 1 Ah Lithium–Sulfur Pouch Cells with Suppressed Polysulfide Shuttle
JUN-WOO PARK, DOOHUN KIM, SE WON HAN, GEON-WOONG LEE, JUNYOUNG HEO, DONG-HEE KIM, HAWON GU, GEUNMI KIM, SUHYEON LIM, JOOHYUN KIM, Korea Electrotechnology Research Institute, Changwon, Republic of Korea
C:P42 Cold Sintering of Geopolymer Powders
L. LATTANZI1, A. SIN1,2, J. MENA GARCIA3, C. RANDALL3, P. COLOMBO3,4, 1ITT Motion Technologies, Via Molini, 19, Barge (CN), Italy; 2UniTO-ITT Joint Lab, Torino, Italy; 3Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, USA; 4Department of Industrial Engineering, University of Padova, Padova, Italy
C:P43 Turning Aluminium Salt Slag into High-Performance NaP Zeolite for Sustainable SO2 Adsorption
I. PADILLA, M. ROMERO, A. LÓPEZ-DELGADO, "Eduardo Torroja" Institute for Construction Science, IETcc-CSIC, Madrid, Spain; J. CASAS, A. NIETO-MÁRQUEZ, Higher Technical School of Engineering and Industrial Design, Polytechnic University of Madrid (UPM), Madrid, Spain
C:P44 Development of Sustainable Geopolymeric Catalysts from Industrial Residues and Waste-Derived Activators
D. ELICHE-QUESADA1,2, S. LEÓN-GUTIÉRREZ1, P. DELGADO-PLANA1,2, L. PÉREZ-VILLAREJO1,2, J.A. CECILIA3, A. INFANTES-MOLINA3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3Department of Inorganic Chemistry, Crystallography, and Mineralogy, Faculty of Sciences, University of Málaga, Málaga, Spain
C:P45 Circular Economy Applied to the Development and Recovery of Functional Construction Materials in Aggressive Environment
D. ELICHE-QUESADA1,2, S. LEÓN -GUTIÉRREZ1, P. DELGADO-PLANA1,2, S. BUENO-RODRÍGUEZ, L. PÉREZ-VILLAREJO1,2, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
C:P46 Design and Synthesis of Alkaline-activated Materials with Tunable Porosity for Water Pollutant Adsorption
L. PÉREZ-VILLAREJO1,2, S. BUENO-RODRÍGUEZ1,2, D. ELICHE-QUESADA1,2, L. HEJJI1,2, Y. LUNA-GALIANO3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3University of Seville, Chemical and Environmental Engineering Department, Seville, Spain
C:P47 Scalable Dion-Jacobson Perovskite Oxide Nanosheets for High-k Dielectric Applications
JI-WON CHOI, Electronic and Hybrid Materials Research Center, Korea Institute of Science and Technology, Seoul & Nanoscience and Technology, KIST School, University of Science and Technology, Seoul, Republic of Korea
C:P48 Defect and Schottky Junction Engineering in Au-Decorated CuO Nanowires for Room-Temperature NO2 Sensing
MYUNG SIK CHOI, Department of Nano & Advanced Materials Science and Engineering, Kyungpook National University, Republic of Korea; JAE-HUN KIM, Department of Materials Science and Engineering, Inha University, Incheon, Republic of Korea
C:P49 Zeeman-type Spin Splittings in Strained ????-wave Altermagnets
YAHUI ZHAI, LONGJU YU, JIAN LV, WEI ZHANG, HONG JIAN ZHAO, Key Laboratory of Material Simulation Methods and Software of Ministry of Education, College of Physics, Jilin University, Changchun, China
C:P50 Performance Enhancement of InGaZnO Thin-Film Transistors by Contact Barrier Modulation Using Oxygen Defects
TAEYOUNG KIM, YOONSOK KIM, JUNTAE AHN, EUN KYU KIM, Department of Physics, Hanyang University, Seoul, Republic of Korea
C:P51 Development of Advanced Luminescent Glass-ceramic 3D Structures
M. MICHÁLKOVÁ1, M. GHADAMYARI2, A. CIBRÍNOVÁ2, J. KRAXNER2, R. KLEMENT2, D. GALUSEK1,2, 1Vitrum Laugaricio – Joint Glass Centre of the IIC SAS, TnU AD, FChPT STU and RONA, a.s., Trenčín, Slovak Republic; 2FunGlass – Centre for Functional and Surface Functionalized Glass, TnUAD, Trenčín, Slovakia
C:P52 Suppression of Via-Sidewall Damage in Glass Interposers via Femtosecond Burst-Mode Laser Drilling
JAEBEOM LEE, JIYONG PARK, Advanced Packaging Integration Center, Korea Institute of Industrial Technology, Incheon, Republic of Korea; Korea National University of Science and Technology (UST), Daejeon, Republic of Korea
C:P53 Fabricating Luminescent Ceramics Derived from Mesoporous Powders by Spark Plasma Sintering
BEIYING ZHOU, WAN JIANG, State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, Shanghai, P.R. China; Engineering Research Center of Advanced Glasses Manufacturing Technology, Ministry of Education, Donghua University, Shanghai, P.R. China
C:P54 Water-induced Plasticity in Hydrated Soda Lime Silicate Glass
R. MEGGIOLARO, L. KARACASULU, M. BIESUZ, University of Trento, Trento, Italy
C:P55 Ultrafine-Bubble-Assisted Zeolite Synthesis from Coal Ash
TAKAYUKI NURUYU1,2, AYAKA TSUTSUMIUCHI2, KENJI SHIDA1, SHINFUKU NOMURA3, MOTOHIDE MATSUDA1, 1Graduate School of Science and Technology, Kumamoto University, Kumamoto City, Japan; 2FKG Corporation Inc., Japan; 3Graduate School of Science and Engineering, Ehime University, Japan
C:P56 Toward Sustainable Porcelain Stoneware: Valorization of Local Raw Materials and Industrial Waste
S. CONTE, CNR-ISSMC, National Research Council, Institute of Science, Technology and Sustainability for Ceramics; F. COLOMBO, R. FANTINI, A.F. GUALTIERI, M. SISTI, R. ARLETTI, Department of Chemical and Geological Sciences, University of Modena and Reggio Emilia
C:P57 Analysis of Thermal Transformations and Characterization of Raw and Calcined Phosphogypsum from Djebel Onk Phosphate
A. GRAIRIA1,2, S. TLILI1, A. AZZI1, A. MEBREK1, W. GHENNAI1, 1Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria; 2Foundry Laboratory, Badji Mokhtar University, Annaba, Algeria
C:P58 Influence of the Nature of the Exogenous Siliceous Source on Mullite Formation from Hydrodesulfurisation (HDS) Catalyst Waste
M. ROMERO, R. CARRIZOSA, I. PADILLA, A. LÓPEZ-DELGADO, Eduardo Torroja Institute for Construction Sciences (IETcc-CSIC), Madrid, Spain; A. DE NONI Jr., Postgraduate Programme in Chemical Engineering, Federal University of Santa Catarina (UFSC), Florianópolis, Brazil
C:P59 Data Driven Classification of Ceramic Raw Materials and Secondary Wastes through Chemical Fingerprinting and PCA Mapping
M. BANDINI, S. ALBONETTI, A. ALLEGRI, Alma Mater Studiorum – Università di Bologna, Bologna, Italy; S. MARETTI, SACMI Imola S.C., Imola, (BO), Italy
C:P60 Influence of the CaO and Glass Phase Content on the Temperature Dependence of Young’s Modulus and Thermal Cycling Behavior of Silica Refractories
E. GREGOROVÁ, W. PABST, P. ŠPRINGER ŠIMONOVÁ, University of Chemistry and Technology, Prague (UCT Prague), Czech Republic; P. BEZDIČKA, Institute of Inorganic Chemistry, Czech Academy of Sciences, Řež, Czech Republic
C:P61 Interfacial Engineering in Carbon and SiC fiber Reinforced SiC Composites: Brittle Failure to Damage-Tolerant Behaviour via Dip-Coated hBN Interphase
E. SHRIYA, B.V. MANOJ KUMAR, Tribo-Ceramics Lab, Metallurgical and Materials Engineering Department, Indian Institute of Technology Roorkee, India
C:P62 Hungarian Centre for Heterogeneous Integration and Packaging (HChiP)
K. BALAZSI, C. BALAZSI, HUN-REN Centre for Energy Research, Budapest, Hungary
C:P63 Point-contact Enhanced Superconductivity in Trigonal PtBi2
O.E. KVITNITSKAYA1,2, L. HARNAGEA1,3, G. SHIPUNOV1, S. ASWARTHAM1, D.V. EFREMOV1, B. BÜCHNER1,4, Yu.G. NAIDYUK2, 1Leibniz Institute for Solid State and Materials Research, IFW Dresden, Dresden, Germany; 2B. Verkin Institute for Low Temperature Physics and Engineering, NAS of Ukraine, Kharkiv, Ukraine; 3I-HUB Quantum Technology Foundation, Indian Institute of Science Education and Research (IISER), Pune, India; 4Institute of Solid State and Materials Physics and Würzburg-Dresden Cluster of Excellence ct.qmat, Technische Universität Dresden, Dresden, Germany
C:P64 Enhancing Biomimetic Calcium Phosphate Deposition on 3D-Printed Al₂O₃/5%vol ZrO₂ Scaffolds via Atmospheric Pressure Plasma Jet Activation
R. CASTANEDA-BAUTA, Postgraduate Programme in Materials Science and Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; J.A. FERREIRA, Department of Biosystems Engineering, FZEA, USP, Brazil; F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP, Brazil
C:P65 Comparative Effects of Atmospheric Pressure Plasma Jet Activation and Phosphoric Acid Pretreatments on Biomimetic CaP Coating and Cellular Response in 3D-Printed Alumina Scaffolds
J.A. FERREIRA, Department of Biosystems Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; R. CASTANEDA-BAUTA, F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP
C:P66 PEG Linker-Assisted Heparin–Dopamine Functionalization for Enhanced Antithrombotic and Endothelialization Performance of Vascular Grafts
TAE HEE KIM, CHAE HWA KIM, Textile Innovation R&D Department, Korea Institute of Industrial Technology, Ansan, Korea
C:P67 Decellularized ECM-Incorporated Hybrid Nanofibers with Hierarchical Micro/Nano Structure for Biomedical Applications
CHAE HWA KIM, TAE HEE KIM, Textile Innovation R&D Department, Korea Institute of Industrial Technology, Ansan, Korea
C:P68 Ultrafast Multiplexed Photothermal Digital PCR Using Oligo(Phenylene-Ethynylene)
KYONG-CHEOL KO, Korea Preclinical Evaluation Center Korea Research Institute of Bioscience and Biotechnology (KRIBB), Daejeon, Republic of Korea
C:P69 Siderophore-Functionalized Nanodrug Platform for Targeted Photothermal Therapy of Multidrug-Resistant Bacteria: Preclinical Evaluation
JINYEONG KIM1, KYONG-CHEOL KO1, JAI EUN AN2, OH SEOK KWON2, 1Korea Research Institute of Bioscience and Biotechnology (KRIBB), Daejeon, Republic of Korea; 2SKKU Advanced Institute of Nanotechnology (SAINT), Republic of Korea
A. AZZI, A. GRAIRIA, A. MEBREK, H. REZZEG, Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria
C:P02 The High-pressure Sintered TiAl-Ti2B Composites
V. MAKSIMOVIĆ1, V. URBANOVICH2, J. MALETAŠKIĆ1, V. PAVKOV1, I. CVIJOVIĆ-ALAGIĆ1, 1Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia; 2SSPA “Scientific-Practical Materials Research Centre of NAS of Belarus”, Minsk, Belarus
C:P03 Data-Driven AI Platform for Standardized Ceramic Materials
HANEUL KIM, HYUNSEOK KO, Korea Institute of Ceramic Engineering and Technology (KICET), Jinju, Republic of Korea
C:P04 Development of Short Fiber Reinforced C-SiC using Recycled Industrial Carbon Fiber
D. DORN, R. GOLLER, Technical University of Applied Sciences Augsburg, Augsburg, Germany; D. KOCH, University of Augsburg, Augsburg, Germany
C:P05 Everglass Database: Development of a Python-Based Tool for Visualization of Glass Properties and Modelling Applications
G. GORNI, M.J. PASCUAL, Ceramics and Glass Institute, CSIC, Madrid, Spain; A. EISENTRÄGER, J. KUHNERT, Fraunhofer ITWM, Kaiserslautern, Germany; R. COMESAÑA, J. POU, LaserON, CINTECX, University of Vigo, Vigo, Spain
C:P06 Eco-Friendly Ceramic 3D Printing via Selective Reaction Hardening of Alginic Acid–Based Low-Polymer Slurries
JEONGHONG HA, JUNGSUB KIM, JONG WAN KO, Korea Institute of Industrial Technology, Ulsan, South Korea
C:P07 3D Printing by PBF-LB/M to Obtain a Biodegradable Mg based Multi Material
D. RADUCANU1, V.D. COJOCARU1, R.E. HENDEA2, A. NOCIVIN3, D. STANCIU2, M.E. COJOCARU1, N. ZARNESCU1, 1POLITEHNICA University of Bucharest, Bucharest, Romania; 2ZIRCON DENT SRL, Cluj Napoca, Romania; 3OVIDIUS University of Constanta, Constanta, Romania
C:P08 Binder-jetted Porous Al2O3 Scaffolds with Selective Metal Infiltration for Functionally Graded Metal-Ceramic Composites
KYUNG IL KIM, Korea Institute of Industrial Technology, Incheon, South Korea
C:P09 Numerical and Experimental Analysis of Slot-Die Coating Stability and Substrate Wettability for Slurry-Based Ceramic Additive Manufacturing
JEONGHONG HA, 3D Printing Manufacturing Process Center, Korea Institute of Industrial Technology (KITECH), Ulsan, Republic of Korea
C:P10 Pellet-based FDM (Fused Deposition Modeling) Fabrication of Alumina Components for Metallurgical Applications – The Influence of Feedstock Compositions
XIAN WU1, F. BULLING2, C.G. ANEZIRIS1, 1TU Bergakademie Freiberg, Germany; 2fem Forschungsinstitut, Germany
C:P11 Joule Heating-assisted Joining of Additively Manufactured Ceramics
F.C. NUNES1, P.A. LANÇONI1, H.E. ARAÚJO1,2, J.V. CAMPOS3, J.K.M.B. DAGUANO4, E.M.J.A. PALLONE1, 1University of São Paulo (USP/FZEA), Pirassununga, Brazil; 2Federal Institute of Education, Science and Technology of São Paulo (IFSP), Hortolândia, Brazil. 3Federal University of São Carlos (UFSCar), São Carlos, Brazil; 4CTI Renato Archer, Campinas, Brazil
C:P12 Joining Alumina to the Inconel®625 alloy by Hot Pressing (HP)
B. CONTRI, S. VALETTE, P. LEFORT, IRCER (European Ceramics Center), UMR CNRS 7315, University of Limoges, Limoges, France
C:P13 Glass-ceramic Sealing Layers for the Integration of Oxygen Transport Membranes in Planar Devices
P. FEDELI, S. DE LA PIERRE, A. CAMMI, A. CAVALIERE, V. NIGRONI, V. MARZAROLI, E. MALGRATI, M. FERRARIS, Ricerca sul Sistema Energetico - RSE SpA, Milano, Italy
C:P14 Electrocatalytic Properties Evaluation of FeNiMoWCuN High Entropy Alloy Thin Films Fabricated by Magnetron Sputtering: Effect of Nitrogen Contents
BIH-SHOW LOU1,2, GAO-ZHENG DAI3, JYH-WEI LEE3,4,5,6, 1Chemistry Division, Center for General Education, Chang Gung University, Taoyuan, Taiwan; 2Department of Orthopaedic Surgery, New Taipei Municipal TuCheng Hospital, Chang Gung Memorial Hospital, Taiwan; 3Department of Materials Engineering, Ming Chi University of Technology, New Taipei, Taiwan; 4Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei, Taiwan; 5College of Engineering, Chang Gung University, Taoyuan, Taiwan; 6High Entropy Materials Center, National Tsing Hua University, Hsinchu, Taiwan
C:P15 Controlled Oxidation of Ultraflat Single-crystalline Cu Thin Films grown by Atomic Sputtering Epitaxy
SU JAE KIM1, SANG-EON PARK1,2, SE-YOUNG JEONG3,4, 1Crystal Bank research Institute, Pusan National University, Busan, Korea; 2Korea Quantum Matter Core-Facility, Pusan National University, Busan, Korea; 3School of Transdisciplinary Engineering, Pusan National University, Busan, Korea; 4Department of Physics, KAIST, Deajeon, Korea
C:P16 Stream-Jet Coating for High-Throughput Fabrication of Low-Pt PEMFC Catalyst Layers
SHIN AE SONG, HYUN A CHO, SANG-HO LEE, Korea Institute of Industrial Technology, Ansan, Republic of Korea
C:P17 ALD-Engineered Surface Modification of PEMFC Catalyst Layers for Enhanced Water Management under Low-Humidity Conditions
HYUN A. CHO, SUNG NAM LIM, JU YOUNG WOO, JEONG-CHEOL SEO, SHIN AE SONG, Korea Institute of Industrial Technology (KITECH), Hanyang University, Ansan, Republic of Korea
C:P18 Preparation of Porous Anode Electrode for Solid Oxide Fuel Cell
I-MING HUNG1,2, JU-YU HUNG1, D. MOHANTY1, 1Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan City, Taiwan; 2Hierarchical Green-Energy Materials (Hi-GEM) Research Center, National Cheng Kung University, Tainan, Taiwan
C:P19 Printing graphene by thermal extrusion
B. FERRARI1, S. WISIKE2, P. ORTEGA-COLUMBRANS2, A. FERRÁNDEZ-MONTERO1, Z. GONZÁLEZ3,4, A.J. SÁNCHEZ-HERENCIA1, 1Instituto de Cerámica y Vidrio, CSIC, Campus de Cantoblanco, Madrid, Spain; 2COLFEED4Print S.L. (Technological spin-off of the Colloidal Processing group of the Spanish National Research Council (CSIC)), Tres Cantos (Madrid), Spain; 3BioPrEn Group, Chemical Engineering Department, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Universidad de Córdoba, Córdoba, Spain; 4Unidad Asociada CSIC-UCO, Fabricación Aditiva de Materiales Compuestos Basados en Celulosa Funcionalizada, Obtenida de Residuos de Biomasa, Córdoba, Spain
C:P20 Coating Behavior and Adhesion Strength of CVD Processed HfC-HfB2 Layers
BYUNG-HYUK JUN, SUBHIN PARK, JISU LEE, DAEJONG KIM, HYEON-GEUN LEE, Materials Safety Technology Research Division, Korea Atomic Energy Research Institute, Daejeon, Republic of Korea; HYUN JUN RYU, SANHA KIM, Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea
C:P21 Thermal diffusivity of (Hf0.5Zr0.5)B2-xSiC Ultra High Temperature Ceramics (UHTCs) exposed to Oxy-Acetylene Torch (OAT) test
M. BUCONI, M. NATALI, L. TORRE, R. ORRÙ, R. LICHERI, M. CASU, G. CAO, M. RALLINI, Terni, Italy
C:P22 Feasibility of Direct Ink Writing for the Additive Manufacturing of Ceramic Matrix Composites for High-Temperature Applications
A. DE ZANET1, R. GIOMETTI2, A. DE MARZI2, G. FRANCHIN2, P. COLOMBO2, A. KUMAR1, 1Leonardo Innovation Hub, Advanced Materials Lab, Leonardo S.p.A., Roma, Lazio, Italy; 2Department of Industrial Engineering, Università degli Studi di Padova, Padova, Italy
C:P23 Fabrication, Mechanical and Oxidation Properties of Ultra High Temperature (Ti0.2Zr0.2Hf0.2Mo0.2W0.2)B2-based Ceramics
M. CASU1, A. MARIO LOCCI1, G. CAO1, S. GARRONI2, R. ORRU1, 1Department of Mechanical, Chemical, and Materials Engineering, University of Cagliari, Cagliari, Italy; 2Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Sassari, Italy
C:P24 Mechanical and Tribological Performance of SiC/NbC Ceramic Composites Fabricated by Conventional and Reactive Processing
R. SEDLÁK, V. PUCHÝ, M. HRUBOVČÁKOVÁ, L. ĎAKOVÁ, I. SHEPA, A. KOVALČÍKOVÁ, P. HVIŠČOVÁ, O. PETRUŠ, T. CSANÁDI, Institute of Materials Research, Slovak Academy of Sciences, Division of Ceramic and Non-Metallic Systems, Košice, Slovak Republic
C:P25 Evolution of Microstructure and Mechanical Performance in Ultra-high Temperature Binary Carbide Systems
A. KOVALČÍKOVÁ, M. HRUBOVČÁKOVÁ, L. ĎAKOVÁ, R. SEDLÁK, D. ALBOV, P. HVIŠČOVÁ, O. PETRUŠ, T. CSANÁDI, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovak Republic
C:P26 High-Entropy Multi-Element Doping of LLZO for Room-Temperature Cubic Stabilization and Enhanced Li-Ion Conductivity
GYURI LEE, KYUNGSUN KIM, HAEJIN HWANG, Dep. of Mater. Sci. & Eng., Inha University, Incheon, South Korea
C:P27 Processing and Structure of High Entropy Electrolytes
M. BIESUZ, University of Trento Levent Karacasulu, University of Trento; A. SARKAR, Indian Institute of Technology Delhi, India
C:P28 Investigation of Novel High-Entropy Rare-Earth Aluminium Garnets
D. VISTORSKAJA, A. KATELNIKOVAS, A. KAREIVA, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Vilnius, Lithuania
C:P29 High-entropy Titanate Based Perovskite Oxides for Capacitive Energy Storage
A. PARYAB, V. SHVARTSMAN, D. LUPASCU, University of Duisburg-Essen, Essen, Germany
C:P30 In Situ Synthesis of MXene-Perovskite Interfaces in 3D Carbon Catalysts Boosts Aerobic Oxime Oxidation
E. ROMERO SALICIO, A. ANOUAR, H. GARCÍA, A. PRIMO, Universidad Politecnica de Valencia, Intituto de Tecnologia Quimica, Valencia, Spain
C:P31 Fe‑Engineered Mo2C MXene for Efficient Electrochemical NH3 Production
S.E. MIDRÉ, LIANG TIAN, H. GARCÍA, S. GOBERNA-FERRÓN, A. PRIMO, Instituto de Tecnología Química, CSIC-UPV, Valencia, Spain
C:P32 Vibrational Properties of Ti3C2T2 (T = Cl, Br) MXenes
M. RIABOV, H. ROUSSEL, T. OUISSE, H. PAZNIAK, UGA, CNRS, Grenoble INP, LMGP, Grenoble Cedex 1, France; A. CHAMPAGNE, ICMCB, CNRS, Pessac Cedex, Bordeaux, France
C:P33 A Comprehensive Framework for Surface Energy Calculations: Bridging Theoretical and Experimental Predictions from Layered van der Waals Solids to MXenes
G. RIBEIRO PORTUGAL1, NINGJUN CHEN1, Y. GOGOTSI2,3, J. ROSEN1,3, 1Materials Design, Department of Physics, Chemistry and Biology (IFM), Linköping University, Sweden; 2A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, USA; 3Wallenberg Initiative Materials Science for Sustainability (WISE), Linköping University, Sweden
C:P34 Rapid and Selective Detection of Metal Ions with a Gold-MXene Plasmonic Interface for Water Quality
S. ALI1, O. GOGOTSI2, A. RAMANAVICIUS3, S. RAMANAVICIUS1, 1Department of Electrochemical Material Science, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania; 2Materials Research Center, Kyiv, Ukraine; 3Department of Nanotechnology, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania
C:P35 EMI Shielding and Rheological Properties of MXene-magnetic Particle Composites Dispersed in an Epoxy Matrix
B.W. LEE, YOUNG-SEOK KIM, Korea Electronics Technology Institute, South Korea; I.S. HWANG, J.W. LEE, B.G. CHO, NOROO Paint & Coatings, South Korea
C:P36 Mitigating Kinetic Asymmetry in Lithium-rich Transition Metal Oxides through Disorder-engineered Structures for Lithium-ion Batteries
KYOJIN KU, Department of Materials Science and Engineering, Hanbat National University, Daejeon, Korea
C:P37 Unique All-Paper Dye-Sensitized Solar Cell Enabled by Carbon Nanotube Composite Paper
YI KOU1, TAKAHIDE OYA1,2, 1Graduate School of Engineering Science, Yokohama National University, Yokohama, Japan; 2Semiconductor and Quantum Integrated Electronics Research Center, Institute for Multidisciplinary Sciences, Yokohama National University, Yokohama, Japan
C:P38 A Study on the Thermodynamic Properties of CO2 for Storage and Transport
SEUNGMIN LEE, Korea Institute of Industrial Technology, Busan, Republic of Korea
C:P39 Study on Carbon Particle Capture in Methane/Hydrogen Flames Using Electric Fields
DAE GEUN PARK, Korea Institute of Industrial Technology, Cheonan-shi, Republic of Korea
C:P40 Engineered Interlayers as Robust Polysulfide Barriers in Lithium–Sulfur Batteries
DOOHUN KIM, JUN-WOO PARK, SE WON HAN, GEON-WOONG LEE, Korea Electrotechnology Research Institute, Changwon, Republic of Korea
C:P41 Oxygen-Functionalized SWCNT Scaffolds Enabling Ultra-Flexible 1 Ah Lithium–Sulfur Pouch Cells with Suppressed Polysulfide Shuttle
JUN-WOO PARK, DOOHUN KIM, SE WON HAN, GEON-WOONG LEE, JUNYOUNG HEO, DONG-HEE KIM, HAWON GU, GEUNMI KIM, SUHYEON LIM, JOOHYUN KIM, Korea Electrotechnology Research Institute, Changwon, Republic of Korea
C:P42 Cold Sintering of Geopolymer Powders
L. LATTANZI1, A. SIN1,2, J. MENA GARCIA3, C. RANDALL3, P. COLOMBO3,4, 1ITT Motion Technologies, Via Molini, 19, Barge (CN), Italy; 2UniTO-ITT Joint Lab, Torino, Italy; 3Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, USA; 4Department of Industrial Engineering, University of Padova, Padova, Italy
C:P43 Turning Aluminium Salt Slag into High-Performance NaP Zeolite for Sustainable SO2 Adsorption
I. PADILLA, M. ROMERO, A. LÓPEZ-DELGADO, "Eduardo Torroja" Institute for Construction Science, IETcc-CSIC, Madrid, Spain; J. CASAS, A. NIETO-MÁRQUEZ, Higher Technical School of Engineering and Industrial Design, Polytechnic University of Madrid (UPM), Madrid, Spain
C:P44 Development of Sustainable Geopolymeric Catalysts from Industrial Residues and Waste-Derived Activators
D. ELICHE-QUESADA1,2, S. LEÓN-GUTIÉRREZ1, P. DELGADO-PLANA1,2, L. PÉREZ-VILLAREJO1,2, J.A. CECILIA3, A. INFANTES-MOLINA3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3Department of Inorganic Chemistry, Crystallography, and Mineralogy, Faculty of Sciences, University of Málaga, Málaga, Spain
C:P45 Circular Economy Applied to the Development and Recovery of Functional Construction Materials in Aggressive Environment
D. ELICHE-QUESADA1,2, S. LEÓN -GUTIÉRREZ1, P. DELGADO-PLANA1,2, S. BUENO-RODRÍGUEZ, L. PÉREZ-VILLAREJO1,2, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
C:P46 Design and Synthesis of Alkaline-activated Materials with Tunable Porosity for Water Pollutant Adsorption
L. PÉREZ-VILLAREJO1,2, S. BUENO-RODRÍGUEZ1,2, D. ELICHE-QUESADA1,2, L. HEJJI1,2, Y. LUNA-GALIANO3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3University of Seville, Chemical and Environmental Engineering Department, Seville, Spain
C:P47 Scalable Dion-Jacobson Perovskite Oxide Nanosheets for High-k Dielectric Applications
JI-WON CHOI, Electronic and Hybrid Materials Research Center, Korea Institute of Science and Technology, Seoul & Nanoscience and Technology, KIST School, University of Science and Technology, Seoul, Republic of Korea
C:P48 Defect and Schottky Junction Engineering in Au-Decorated CuO Nanowires for Room-Temperature NO2 Sensing
MYUNG SIK CHOI, Department of Nano & Advanced Materials Science and Engineering, Kyungpook National University, Republic of Korea; JAE-HUN KIM, Department of Materials Science and Engineering, Inha University, Incheon, Republic of Korea
C:P49 Zeeman-type Spin Splittings in Strained ????-wave Altermagnets
YAHUI ZHAI, LONGJU YU, JIAN LV, WEI ZHANG, HONG JIAN ZHAO, Key Laboratory of Material Simulation Methods and Software of Ministry of Education, College of Physics, Jilin University, Changchun, China
C:P50 Performance Enhancement of InGaZnO Thin-Film Transistors by Contact Barrier Modulation Using Oxygen Defects
TAEYOUNG KIM, YOONSOK KIM, JUNTAE AHN, EUN KYU KIM, Department of Physics, Hanyang University, Seoul, Republic of Korea
C:P51 Development of Advanced Luminescent Glass-ceramic 3D Structures
M. MICHÁLKOVÁ1, M. GHADAMYARI2, A. CIBRÍNOVÁ2, J. KRAXNER2, R. KLEMENT2, D. GALUSEK1,2, 1Vitrum Laugaricio – Joint Glass Centre of the IIC SAS, TnU AD, FChPT STU and RONA, a.s., Trenčín, Slovak Republic; 2FunGlass – Centre for Functional and Surface Functionalized Glass, TnUAD, Trenčín, Slovakia
C:P52 Suppression of Via-Sidewall Damage in Glass Interposers via Femtosecond Burst-Mode Laser Drilling
JAEBEOM LEE, JIYONG PARK, Advanced Packaging Integration Center, Korea Institute of Industrial Technology, Incheon, Republic of Korea; Korea National University of Science and Technology (UST), Daejeon, Republic of Korea
C:P53 Fabricating Luminescent Ceramics Derived from Mesoporous Powders by Spark Plasma Sintering
BEIYING ZHOU, WAN JIANG, State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, Shanghai, P.R. China; Engineering Research Center of Advanced Glasses Manufacturing Technology, Ministry of Education, Donghua University, Shanghai, P.R. China
C:P54 Water-induced Plasticity in Hydrated Soda Lime Silicate Glass
R. MEGGIOLARO, L. KARACASULU, M. BIESUZ, University of Trento, Trento, Italy
C:P55 Ultrafine-Bubble-Assisted Zeolite Synthesis from Coal Ash
TAKAYUKI NURUYU1,2, AYAKA TSUTSUMIUCHI2, KENJI SHIDA1, SHINFUKU NOMURA3, MOTOHIDE MATSUDA1, 1Graduate School of Science and Technology, Kumamoto University, Kumamoto City, Japan; 2FKG Corporation Inc., Japan; 3Graduate School of Science and Engineering, Ehime University, Japan
C:P56 Toward Sustainable Porcelain Stoneware: Valorization of Local Raw Materials and Industrial Waste
S. CONTE, CNR-ISSMC, National Research Council, Institute of Science, Technology and Sustainability for Ceramics; F. COLOMBO, R. FANTINI, A.F. GUALTIERI, M. SISTI, R. ARLETTI, Department of Chemical and Geological Sciences, University of Modena and Reggio Emilia
C:P57 Analysis of Thermal Transformations and Characterization of Raw and Calcined Phosphogypsum from Djebel Onk Phosphate
A. GRAIRIA1,2, S. TLILI1, A. AZZI1, A. MEBREK1, W. GHENNAI1, 1Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria; 2Foundry Laboratory, Badji Mokhtar University, Annaba, Algeria
C:P58 Influence of the Nature of the Exogenous Siliceous Source on Mullite Formation from Hydrodesulfurisation (HDS) Catalyst Waste
M. ROMERO, R. CARRIZOSA, I. PADILLA, A. LÓPEZ-DELGADO, Eduardo Torroja Institute for Construction Sciences (IETcc-CSIC), Madrid, Spain; A. DE NONI Jr., Postgraduate Programme in Chemical Engineering, Federal University of Santa Catarina (UFSC), Florianópolis, Brazil
C:P59 Data Driven Classification of Ceramic Raw Materials and Secondary Wastes through Chemical Fingerprinting and PCA Mapping
M. BANDINI, S. ALBONETTI, A. ALLEGRI, Alma Mater Studiorum – Università di Bologna, Bologna, Italy; S. MARETTI, SACMI Imola S.C., Imola, (BO), Italy
C:P60 Influence of the CaO and Glass Phase Content on the Temperature Dependence of Young’s Modulus and Thermal Cycling Behavior of Silica Refractories
E. GREGOROVÁ, W. PABST, P. ŠPRINGER ŠIMONOVÁ, University of Chemistry and Technology, Prague (UCT Prague), Czech Republic; P. BEZDIČKA, Institute of Inorganic Chemistry, Czech Academy of Sciences, Řež, Czech Republic
C:P61 Interfacial Engineering in Carbon and SiC fiber Reinforced SiC Composites: Brittle Failure to Damage-Tolerant Behaviour via Dip-Coated hBN Interphase
E. SHRIYA, B.V. MANOJ KUMAR, Tribo-Ceramics Lab, Metallurgical and Materials Engineering Department, Indian Institute of Technology Roorkee, India
C:P62 Hungarian Centre for Heterogeneous Integration and Packaging (HChiP)
K. BALAZSI, C. BALAZSI, HUN-REN Centre for Energy Research, Budapest, Hungary
C:P63 Point-contact Enhanced Superconductivity in Trigonal PtBi2
O.E. KVITNITSKAYA1,2, L. HARNAGEA1,3, G. SHIPUNOV1, S. ASWARTHAM1, D.V. EFREMOV1, B. BÜCHNER1,4, Yu.G. NAIDYUK2, 1Leibniz Institute for Solid State and Materials Research, IFW Dresden, Dresden, Germany; 2B. Verkin Institute for Low Temperature Physics and Engineering, NAS of Ukraine, Kharkiv, Ukraine; 3I-HUB Quantum Technology Foundation, Indian Institute of Science Education and Research (IISER), Pune, India; 4Institute of Solid State and Materials Physics and Würzburg-Dresden Cluster of Excellence ct.qmat, Technische Universität Dresden, Dresden, Germany
C:P64 Enhancing Biomimetic Calcium Phosphate Deposition on 3D-Printed Al₂O₃/5%vol ZrO₂ Scaffolds via Atmospheric Pressure Plasma Jet Activation
R. CASTANEDA-BAUTA, Postgraduate Programme in Materials Science and Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; J.A. FERREIRA, Department of Biosystems Engineering, FZEA, USP, Brazil; F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP, Brazil
C:P65 Comparative Effects of Atmospheric Pressure Plasma Jet Activation and Phosphoric Acid Pretreatments on Biomimetic CaP Coating and Cellular Response in 3D-Printed Alumina Scaffolds
J.A. FERREIRA, Department of Biosystems Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; R. CASTANEDA-BAUTA, F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP
C:P66 PEG Linker-Assisted Heparin–Dopamine Functionalization for Enhanced Antithrombotic and Endothelialization Performance of Vascular Grafts
TAE HEE KIM, CHAE HWA KIM, Textile Innovation R&D Department, Korea Institute of Industrial Technology, Ansan, Korea
C:P67 Decellularized ECM-Incorporated Hybrid Nanofibers with Hierarchical Micro/Nano Structure for Biomedical Applications
CHAE HWA KIM, TAE HEE KIM, Textile Innovation R&D Department, Korea Institute of Industrial Technology, Ansan, Korea
C:P68 Ultrafast Multiplexed Photothermal Digital PCR Using Oligo(Phenylene-Ethynylene)
KYONG-CHEOL KO, Korea Preclinical Evaluation Center Korea Research Institute of Bioscience and Biotechnology (KRIBB), Daejeon, Republic of Korea
C:P69 Siderophore-Functionalized Nanodrug Platform for Targeted Photothermal Therapy of Multidrug-Resistant Bacteria: Preclinical Evaluation
JINYEONG KIM1, KYONG-CHEOL KO1, JAI EUN AN2, OH SEOK KWON2, 1Korea Research Institute of Bioscience and Biotechnology (KRIBB), Daejeon, Republic of Korea; 2SKKU Advanced Institute of Nanotechnology (SAINT), Republic of Korea