IC-1 - 10th International Conference
Advanced Inorganic Particulates and Fibre Composites for Structural and Thermal Management Applications
TUESDAY JUNE 16 AFTERNOON
Room: MAGIONE B
Chair: Mrityunjay SINGH, USA (Convener)
14.55 Welcome
Session IC-1.A Production and properties of reinforcements, preforms, and matrix materials
15.00 IC-1.A:IL01 Polymer Derived Ceramics and Composite Matrices for Ceramic Composites
RAVI KUMAR, Laboratory for High Performance Ceramics, Indian Institute of Technology Madras (IIT Madras), Chennai, India
15.30 IC-1.A:IL02 Efficiency of the Thermal-gradient Chemical Vapor Infiltration Process for CMCs Manufacturing: Practice and Theory
G.L. VIGNOLES, University of Bordeaux, LCTS, Pessac, France
16.00 IC-1.A:IL04 Synthesis of Zr-based Polymer Precursor for PIP Method using the Sol-Gel Method
SEA-HOON LEE, JAEIL SO, KEON-HO LEE, Korea Institute of Materials Science, Changwon, Republic of Korea
WEDNESDAY JUNE 17 MORNING
Room: MAGIONE B
Chair: Gerard L. VIGNOLES, France
Session IC-1.B Interfaces / Interphase
8.30 IC-1.B:IL05 Structure and Properties of CVD Fiber Coatings for SiC/SiC Composites
K. SCHÖNFELD, M. KRUG, C. STEINBORN, Fraunhofer IKTS, Dresden, Germany
9.00 IC-1.B:IL06 Synergistic Effect of Nanotubes and Graphenes in ceramic Composites: Role of Interfaces
C. BALÁZSI, K. BALÁZSI, HUN-REN Centre for Energy Research, Institute for Technical Physics and Materials Science, Budapest, Hungary
9.30 IC-1.B:IL07 Micromechanical and Microstructural Analysis of the Interphase in SiC/SiC
K. BOCK, K. POSTLER, D. KOCH, J. MOOSBURGER-WILL, Institute of Materials Resource Management, University of Augsburg, Augsburg, Germany
10.00 Break
Chair: Ravi KUMAR, India
Session IC-1.C Processing and fabrication of MMCS, CMCS, and C/C composites
10.20 IC-1.C:IL08 New Methods for the Manufacture of C/C-SiC Thrusters for Space Propulsion
B. HEIDENREICH, R. JEMMALI, R. PERRIER-GUSTIN, D. CEPLI, M. SMOLEJ, D. CEPLI, F. VOGEL, J. PEICHL, DLR, Institute of structures and design, Stuttgart, Germany; M. KURILOV, T. HÖRGER, DLR, Institute of Space Propulsion, Lampoldshausen, Germany
10.50 IC-1.C:IL09 Fabrication of Oxide/Oxide Composites
M. SINGLARD, IRT Saint Exupéry, Talence, France
11.20 IC-1.C:IL10 Fabrication of CVI-SiCf/SiC Composite for Heat Exchanger Applications
DAEJONG KIM, J.-B. KIM, H.-G. LEE, W.-J. KIM, B.-H. JEON, KAERI, Daejeon, South Korea; H.S. MOON, Sewon Hardfacing Co. Ltd., Mokpo, South Korea; G. BIANCHI, A. ORTONA, SUPSI, Manno, Switzerland; V. PAPAGEORGIOU, IHI BERNEX AG, Olten, Switzerland
11.50 IC-1.C:IL11 Advanced Manufacturing of Conical CMC Structures via Wet-laid Nonwoven Technology
F. KESSEL, M. FRIEß, O. HOHN, German Aerospace Center, Stuttgart, Germany
Session IC-1.G Applications
12.20 IC-1.G:IL35 CMCs at GE Aerospace: Engines and Beyond
J. WEAVER, B. DIX, D. DUNN, GE Aerospace, Niskayuna, NY, USA
12.50 IC-1.G:L36 Development of Oxide / Oxide Ceramic Matrix Composites (CMCs) for Exhaust Sections: From the Components Choice, Fabrication and Characterizations to the First Ground Tests
N. EBERLING-FUX, J.-C. MALENFANT, A. PLANCKEEL, P. DISS, E. LESIZZA, Safran Ceramics, Mérignac, France
WEDNESDAY JUNE 17 AFTERNOON
Room: MAGIONE B
Chair: Csaba BALAZSI, Hungary
Session IC-1.C Processing and fabrication of MMCS, CMCS, and C/C composites
14.30 IC-1.C:IL12 Additive Manufactured C/C-SiC based on FFF - Advances and Challenges
N. LANGHOF, W. FREUDENBERG, J. BEST, S. SCHAFFÖNER, University of Bayreuth, Chair of Ceramic Materials Engineering, Bayreuth, Germany
15.00 IC-1.C:IL13 Integration, Joining, and Repair Technology Development of Ceramic Matrix Composites for Aerospace Applications
M.C. HALBIG1, M. SINGH2, A. ALMANSOUR1, 1NASA Glenn Research Center, Cleveland, OH, USA; 2Ohio Aerospace Institute, Cleveland, OH, USA
15.30 IC-1.C:L14 Role of Boron in the Si Melt-infiltrated Matrix of SiC/SiC Composites
G. CHOLLON, H. PLAISANTIN, J. ROGER, Laboratoire des Composites Thermostructuraux (LCTS), CNRS, Univ. Bordeaux, Safran Ceramics, CEA, UMR 5801, Pessac, France
15.50 Break
Chair: Michael C. HALBIG, USA
Session IC-1.D Ultrahigh Temperature Ceramic Composites (UHTCCs) and Laminated Composite Structures
16.20 IC-1.D:IL16 Processing and High Temperature Performance of UHTC-coated CMCs
H. ÜNSAL, M. HIČÁK, M. TATARKOVÁ, P. TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia; Ş. ATEŞ, TUBITAK Marmara Research Center, Materials Technologies, Gebze, Kocaeli, Turkey; Z. CHLUP, I. DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czech Republic; R. KUMAR, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, India
16.50 IC-1.D:IL19 Processing and Structural Optimization of Short Fibre-Reinforced UHTCMCs
M. MOR, A. VINCI, S. FAILLA, L. ZOLI, D. SCITI, CNR-ISSMC, Faenza, Italy
17.20 IC-1.D:IL17 Fabrication and Oxidation Resistance of Coated and Uncoated UHTCMCs
A. VINCI, ISSMC - CNR, Faenza, Italy; J.-E. FOERSTER, Embry-Riddle Aeronautical University, Daytona Beach, FL, USA; R. NARAPARAJU, German Aerospace Center (DLR), Cologne, Germany; D. SCITI, ISSMC - CNR, Faenza, Italy
17.50 IC-1.E:L26 Environmental Deposits Corrosion on Thermal Barrier Coatings in Jet Engines
WENJIA SONG, School of Materials Science and Engineering, Beihang University, Beijing, China
(rescheduled at the request of the Presenting Author)
FRIDAY JUNE 19 MORNING
Room: MAGIONE B
Chair: Nico LANGHOF, Germany
Session IC-1.E Property, modeling and characterization
8.30 IC-1.E:IL20 Design of Advanced Environmental Barrier Coatings
JIE ZHANG, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
9.00 IC-1.E:L21 Non-destructive Evaluation of Elastic Properties of C/C-SiC at Different Temperatures
S. HÖNIG, J. SCHUKRAFT, German Aerospace Center (DLR), Institute of Structures and Design (BT), Stuttgart, Germany; J. ROßDEUTSCHER, German Aerospace Center (DLR), Institute for Frontier Materials on Earth and in Space (FM), Cologne, Germany; T. LEBER, Thorsten Tonnesen RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany; D. KOCH, University of Augsburg, Institute of Materials Resource Management, Augsburg, Germany
9.20 IC-1.E:L22 Flexural Behavior Analysis (DIC, AE, FEA) of a Sandwich Structure based on Geopolymer-matrix Composites.
D. HABANS1, P. REYNAUD1, É. PRUD’HOMME1, G. FANTOZZI1, T. CUTARD2, G. DUSSERRE2, N. GODIN1, 1INSA Lyon, Claude Bernard Lyon 1 University, CNRS, MATEIS, UMR5510, Villeurbanne, France; 2Institut Clement Ader (ICA), University of Toulouse, CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Campus Jarlard, Albi, France
9.40 Break
Chair: Peter MECHNICH, Germany
Session IC-1.F Composites for thermal management
10.10 IC-1.F:IL30 Additive Manufacturing of Oxide Fiber Composites
J. STILLER, D. NESTLER, Chemnitz University of Technology, Chemnitz, Germany
10.40 IC-1.F:L32 Advancements of High Temperature Coating for SiCf/SiC Composite
JINGYANG WANG, Institute of Metal Research, CAS, China Liaoning Academy of Materials, China
11.00 IC-1.F:IL32b Current Activated Reactive Ultrafast Joining (CARUJ) of Ceramics
D. SINGH, Applied Materials Division, Argonne National Laboratory, Lemont, IL, USA
11.30 IC-1.F:L33 Thermal Conductivity of Carbon Fiber-reinforced Copper Matrix Composites Fabricated by Powder Metallurgy
V. GAUTHIER-BRUNET, M. CHARTEAU, V. AUDURIER, A. JOULAIN, Institut PPRIME, Poitiers, FRANCE; J.-F. SILVAIN, ICMCB, Pessac, France
11.50 IC-1.F:L34 Engineering Segregated 3D Networks of MgO and BN Fillers for High-Performance Thermal Interface Materials
HYUNAE CHA, Korea Institute of Materials Science, Changwon-si, South Korea
FRIDAY JUNE 19 AFTERNOON
Room: MAGIONE B
Chair: Jie ZHANG, China
Session IC-1.E Property, modeling and characterization
14.30 IC-1.E:IL23 Topology Optimization of Complex Ceramic Components: Integrating Computational Design and Additive Manufacturing for Functional Performance
A. ORTONA, SUPSI-DTI-MEMTi, Lugano, Switzerland
15.00 IC-1.E:IL24 Densification, Microstructure and Properties of Nano-ceramics Fabricated under Ultrahigh Pressure
WEI JI, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China; ZHENGYI FU, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China
15.30 IC-1.E:IL25 Real time X-ray Tomography Imaging of Cracks Initiation and Propagation in CMCs at 1200°C
DONG (LILLY) LIU, Department of Engineering Science, University of Oxford, UK
16.00 Break
Chair: Mrityunjay SINGH, USA
16.30 IC-1.E:IL27 Thermal Aging of Oxide/Oxide CMC – Evolving Microstructural Features and their Relevance for Mechanical Properties
P. MECHNICH, G. ALKAN, F. FLUCHT, J. ROSSDEUTSCHER, German Aerospace Center (DLR) Institute for Frontier Materials on Earth and in Space, Cologne, Germany
17.00 IC-1.E:IL28 Prediction of Thermo-Mechanical Lifetime in Self-Healing Ceramic Particulate Composites via Combined Multiscale–Multiphysics Modeling and Machine Learning
S. ANUSUYA PONNUSAMI, Queen Mary University of London, UK; A. KUMTHEKAR, TU Delft, Netherlands; S. TURTELTAUB, TU Delft, Netherlands
17.30 IC-1.E:IL29 Designing Slurry Formulations for SiC/SiC Minicomposites: A Bayesian Optimization Approach to Maximize the SiC Content
K. POSTLER, J. MOOSBURGER-WILL, N. MEYER, N. JAIN, D. KOCH, Universität Augsburg, Augsburg, Germany
Room: MAGIONE B
Chair: Mrityunjay SINGH, USA (Convener)
14.55 Welcome
Session IC-1.A Production and properties of reinforcements, preforms, and matrix materials
15.00 IC-1.A:IL01 Polymer Derived Ceramics and Composite Matrices for Ceramic Composites
RAVI KUMAR, Laboratory for High Performance Ceramics, Indian Institute of Technology Madras (IIT Madras), Chennai, India
15.30 IC-1.A:IL02 Efficiency of the Thermal-gradient Chemical Vapor Infiltration Process for CMCs Manufacturing: Practice and Theory
G.L. VIGNOLES, University of Bordeaux, LCTS, Pessac, France
16.00 IC-1.A:IL04 Synthesis of Zr-based Polymer Precursor for PIP Method using the Sol-Gel Method
SEA-HOON LEE, JAEIL SO, KEON-HO LEE, Korea Institute of Materials Science, Changwon, Republic of Korea
WEDNESDAY JUNE 17 MORNING
Room: MAGIONE B
Chair: Gerard L. VIGNOLES, France
Session IC-1.B Interfaces / Interphase
8.30 IC-1.B:IL05 Structure and Properties of CVD Fiber Coatings for SiC/SiC Composites
K. SCHÖNFELD, M. KRUG, C. STEINBORN, Fraunhofer IKTS, Dresden, Germany
9.00 IC-1.B:IL06 Synergistic Effect of Nanotubes and Graphenes in ceramic Composites: Role of Interfaces
C. BALÁZSI, K. BALÁZSI, HUN-REN Centre for Energy Research, Institute for Technical Physics and Materials Science, Budapest, Hungary
9.30 IC-1.B:IL07 Micromechanical and Microstructural Analysis of the Interphase in SiC/SiC
K. BOCK, K. POSTLER, D. KOCH, J. MOOSBURGER-WILL, Institute of Materials Resource Management, University of Augsburg, Augsburg, Germany
10.00 Break
Chair: Ravi KUMAR, India
Session IC-1.C Processing and fabrication of MMCS, CMCS, and C/C composites
10.20 IC-1.C:IL08 New Methods for the Manufacture of C/C-SiC Thrusters for Space Propulsion
B. HEIDENREICH, R. JEMMALI, R. PERRIER-GUSTIN, D. CEPLI, M. SMOLEJ, D. CEPLI, F. VOGEL, J. PEICHL, DLR, Institute of structures and design, Stuttgart, Germany; M. KURILOV, T. HÖRGER, DLR, Institute of Space Propulsion, Lampoldshausen, Germany
10.50 IC-1.C:IL09 Fabrication of Oxide/Oxide Composites
M. SINGLARD, IRT Saint Exupéry, Talence, France
11.20 IC-1.C:IL10 Fabrication of CVI-SiCf/SiC Composite for Heat Exchanger Applications
DAEJONG KIM, J.-B. KIM, H.-G. LEE, W.-J. KIM, B.-H. JEON, KAERI, Daejeon, South Korea; H.S. MOON, Sewon Hardfacing Co. Ltd., Mokpo, South Korea; G. BIANCHI, A. ORTONA, SUPSI, Manno, Switzerland; V. PAPAGEORGIOU, IHI BERNEX AG, Olten, Switzerland
11.50 IC-1.C:IL11 Advanced Manufacturing of Conical CMC Structures via Wet-laid Nonwoven Technology
F. KESSEL, M. FRIEß, O. HOHN, German Aerospace Center, Stuttgart, Germany
Session IC-1.G Applications
12.20 IC-1.G:IL35 CMCs at GE Aerospace: Engines and Beyond
J. WEAVER, B. DIX, D. DUNN, GE Aerospace, Niskayuna, NY, USA
12.50 IC-1.G:L36 Development of Oxide / Oxide Ceramic Matrix Composites (CMCs) for Exhaust Sections: From the Components Choice, Fabrication and Characterizations to the First Ground Tests
N. EBERLING-FUX, J.-C. MALENFANT, A. PLANCKEEL, P. DISS, E. LESIZZA, Safran Ceramics, Mérignac, France
WEDNESDAY JUNE 17 AFTERNOON
Room: MAGIONE B
Chair: Csaba BALAZSI, Hungary
Session IC-1.C Processing and fabrication of MMCS, CMCS, and C/C composites
14.30 IC-1.C:IL12 Additive Manufactured C/C-SiC based on FFF - Advances and Challenges
N. LANGHOF, W. FREUDENBERG, J. BEST, S. SCHAFFÖNER, University of Bayreuth, Chair of Ceramic Materials Engineering, Bayreuth, Germany
15.00 IC-1.C:IL13 Integration, Joining, and Repair Technology Development of Ceramic Matrix Composites for Aerospace Applications
M.C. HALBIG1, M. SINGH2, A. ALMANSOUR1, 1NASA Glenn Research Center, Cleveland, OH, USA; 2Ohio Aerospace Institute, Cleveland, OH, USA
15.30 IC-1.C:L14 Role of Boron in the Si Melt-infiltrated Matrix of SiC/SiC Composites
G. CHOLLON, H. PLAISANTIN, J. ROGER, Laboratoire des Composites Thermostructuraux (LCTS), CNRS, Univ. Bordeaux, Safran Ceramics, CEA, UMR 5801, Pessac, France
15.50 Break
Chair: Michael C. HALBIG, USA
Session IC-1.D Ultrahigh Temperature Ceramic Composites (UHTCCs) and Laminated Composite Structures
16.20 IC-1.D:IL16 Processing and High Temperature Performance of UHTC-coated CMCs
H. ÜNSAL, M. HIČÁK, M. TATARKOVÁ, P. TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia; Ş. ATEŞ, TUBITAK Marmara Research Center, Materials Technologies, Gebze, Kocaeli, Turkey; Z. CHLUP, I. DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czech Republic; R. KUMAR, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, India
16.50 IC-1.D:IL19 Processing and Structural Optimization of Short Fibre-Reinforced UHTCMCs
M. MOR, A. VINCI, S. FAILLA, L. ZOLI, D. SCITI, CNR-ISSMC, Faenza, Italy
17.20 IC-1.D:IL17 Fabrication and Oxidation Resistance of Coated and Uncoated UHTCMCs
A. VINCI, ISSMC - CNR, Faenza, Italy; J.-E. FOERSTER, Embry-Riddle Aeronautical University, Daytona Beach, FL, USA; R. NARAPARAJU, German Aerospace Center (DLR), Cologne, Germany; D. SCITI, ISSMC - CNR, Faenza, Italy
17.50 IC-1.E:L26 Environmental Deposits Corrosion on Thermal Barrier Coatings in Jet Engines
WENJIA SONG, School of Materials Science and Engineering, Beihang University, Beijing, China
(rescheduled at the request of the Presenting Author)
FRIDAY JUNE 19 MORNING
Room: MAGIONE B
Chair: Nico LANGHOF, Germany
Session IC-1.E Property, modeling and characterization
8.30 IC-1.E:IL20 Design of Advanced Environmental Barrier Coatings
JIE ZHANG, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
9.00 IC-1.E:L21 Non-destructive Evaluation of Elastic Properties of C/C-SiC at Different Temperatures
S. HÖNIG, J. SCHUKRAFT, German Aerospace Center (DLR), Institute of Structures and Design (BT), Stuttgart, Germany; J. ROßDEUTSCHER, German Aerospace Center (DLR), Institute for Frontier Materials on Earth and in Space (FM), Cologne, Germany; T. LEBER, Thorsten Tonnesen RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany; D. KOCH, University of Augsburg, Institute of Materials Resource Management, Augsburg, Germany
9.20 IC-1.E:L22 Flexural Behavior Analysis (DIC, AE, FEA) of a Sandwich Structure based on Geopolymer-matrix Composites.
D. HABANS1, P. REYNAUD1, É. PRUD’HOMME1, G. FANTOZZI1, T. CUTARD2, G. DUSSERRE2, N. GODIN1, 1INSA Lyon, Claude Bernard Lyon 1 University, CNRS, MATEIS, UMR5510, Villeurbanne, France; 2Institut Clement Ader (ICA), University of Toulouse, CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Campus Jarlard, Albi, France
9.40 Break
Chair: Peter MECHNICH, Germany
Session IC-1.F Composites for thermal management
10.10 IC-1.F:IL30 Additive Manufacturing of Oxide Fiber Composites
J. STILLER, D. NESTLER, Chemnitz University of Technology, Chemnitz, Germany
10.40 IC-1.F:L32 Advancements of High Temperature Coating for SiCf/SiC Composite
JINGYANG WANG, Institute of Metal Research, CAS, China Liaoning Academy of Materials, China
11.00 IC-1.F:IL32b Current Activated Reactive Ultrafast Joining (CARUJ) of Ceramics
D. SINGH, Applied Materials Division, Argonne National Laboratory, Lemont, IL, USA
11.30 IC-1.F:L33 Thermal Conductivity of Carbon Fiber-reinforced Copper Matrix Composites Fabricated by Powder Metallurgy
V. GAUTHIER-BRUNET, M. CHARTEAU, V. AUDURIER, A. JOULAIN, Institut PPRIME, Poitiers, FRANCE; J.-F. SILVAIN, ICMCB, Pessac, France
11.50 IC-1.F:L34 Engineering Segregated 3D Networks of MgO and BN Fillers for High-Performance Thermal Interface Materials
HYUNAE CHA, Korea Institute of Materials Science, Changwon-si, South Korea
FRIDAY JUNE 19 AFTERNOON
Room: MAGIONE B
Chair: Jie ZHANG, China
Session IC-1.E Property, modeling and characterization
14.30 IC-1.E:IL23 Topology Optimization of Complex Ceramic Components: Integrating Computational Design and Additive Manufacturing for Functional Performance
A. ORTONA, SUPSI-DTI-MEMTi, Lugano, Switzerland
15.00 IC-1.E:IL24 Densification, Microstructure and Properties of Nano-ceramics Fabricated under Ultrahigh Pressure
WEI JI, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China; ZHENGYI FU, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China
15.30 IC-1.E:IL25 Real time X-ray Tomography Imaging of Cracks Initiation and Propagation in CMCs at 1200°C
DONG (LILLY) LIU, Department of Engineering Science, University of Oxford, UK
16.00 Break
Chair: Mrityunjay SINGH, USA
16.30 IC-1.E:IL27 Thermal Aging of Oxide/Oxide CMC – Evolving Microstructural Features and their Relevance for Mechanical Properties
P. MECHNICH, G. ALKAN, F. FLUCHT, J. ROSSDEUTSCHER, German Aerospace Center (DLR) Institute for Frontier Materials on Earth and in Space, Cologne, Germany
17.00 IC-1.E:IL28 Prediction of Thermo-Mechanical Lifetime in Self-Healing Ceramic Particulate Composites via Combined Multiscale–Multiphysics Modeling and Machine Learning
S. ANUSUYA PONNUSAMI, Queen Mary University of London, UK; A. KUMTHEKAR, TU Delft, Netherlands; S. TURTELTAUB, TU Delft, Netherlands
17.30 IC-1.E:IL29 Designing Slurry Formulations for SiC/SiC Minicomposites: A Bayesian Optimization Approach to Maximize the SiC Content
K. POSTLER, J. MOOSBURGER-WILL, N. MEYER, N. JAIN, D. KOCH, Universität Augsburg, Augsburg, Germany