16th International Ceramics Congress
Poster Presentations
C:P01 Siliciding of Synthetic Diamonds with SiO Gas
P.V. ISTOMIN, I.M. BELYAEV, E.I. ISTOMINA, A.V. NADUTKIN, V.E. GRASS, Yu.P. ISTOMINA, Institute of Chemistry of Federal Research Centre “Коmi Science Centre of the Ural Branch of the Russian Academy of Sciences”, Syktyvkar, Russia
C:P02 The Influence of Low-temperature Hydrothermal Synthesis Parameters on the Possibility of Obtaining Multi-doped ZrO2
Y.A. GARANIN1,2, R.I. SHAKIRZYANOV1,2, M.E. KALIYEKPEROV1, 1Engineering Profile Laboratory, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; 2Laboratory of Solid State Physics, Astana branch of the Institute of Nuclear Physics, Astana, Kazakhstan
C:P03 Gas-phase Synthesis of Nanocrystalline SiC
E.I. ISTOMINA, P.V. ISTOMIN, A.V. NADUTKIN, V.E. GRASS, I.M. BELYAEV, O.G. BAEVA, Yu.P. Istomina Institute of Chemistry FRC KomiSC UrB RAS, Syktyvkar, Russia
C:P04 Effect of Calcination Temperature on Characterization of Natural Hydroxyapatite Prepared from Bovine Bones
A. AZZI, A. GRAIRIA, A. MEBREK, H. REZZEG, Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria
C:P05 Turning Industrial Phosphogypsum Waste into Next-Generation Bioceramics for a Sustainable Future
E. JURSENE, A. PADARAUSKAS, I. GRIGORAVICIUTE, A. KAREIVA, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
C:P06 The High-pressure Sintered TiAl-Ti2B Composites
V. MAKSIMOVIĆ1, V. URBANOVICH2, J. MALETAŠKIĆ1, V. PAVKOV1, I. CVIJOVIĆ-ALAGIĆ1, 1Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia; 2SSPA “Scientific-Practical Materials Research Centre of NAS of Belarus”, Minsk, Belarus
C:P07 Everglass Database: Development of a Python-Based Tool for Visualization of Glass Properties and Modelling Applications
G. GORNI, M.J. PASCUAL, Ceramics and Glass Institute, CSIC, Madrid, Spain; A. EISENTRÄGER, J. KUHNERT, Fraunhofer ITWM, Kaiserslautern, Germany; R. COMESAÑA, J. POU, LaserON, CINTECX, University of Vigo, Vigo, Spain
C:P08 Eco-Friendly Ceramic 3D Printing via Selective Reaction Hardening of Alginic Acid–Based Low-Polymer Slurries
JEONGHONG HA, JUNGSUB KIM, JONG WAN KO, Korea Institute of Industrial Technology, Ulsan, South Korea
C:P09 3D Printing by PBF-LB/M to Obtain a Biodegradable Mg based Multi Material
D. RADUCANU1, V.D. COJOCARU1, R.E. HENDEA2, A. NOCIVIN3, D. STANCIU2, M.E. COJOCARU1, N. ZARNESCU1, 1POLITEHNICA University of Bucharest, Bucharest, Romania; 2ZIRCON DENT SRL, Cluj Napoca, Romania; 3OVIDIUS University of Constanta, Constanta, Romania
C:P10 Digital Light Processing 3D Printing Of Large-Scale And Crack-Free Ceramics With Perforated Internal Honeycomb Structures
SIQIAN WU1, RONG WANG1, LIUCHAO JIN1,2, XINGJIAN HUANG1, WUZHAO LI1, KUN ZHOU3, QI GE1, 1Shenzhen Key Laboratory for Additive Manufacturing of High-Performance Materials, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China; 2Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Hong Kong, China; 3Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore
C:P11 Binder-jetted Porous Al2O3 Scaffolds with Selective Metal Infiltration for Functionally Graded Metal-Ceramic Composites
KYUNG IL KIM, Korea Institute of Industrial Technology, Incheon, South Korea
C:P12 Numerical and Experimental Analysis of Slot-Die Coating Stability and Substrate Wettability for Slurry-Based Ceramic Additive Manufacturing
JEONGHONG HA, 3D Printing Manufacturing Process Center, Korea Institute of Industrial Technology (KITECH), Ulsan, Republic of Korea
C:P13 Joining Alumina to the Inconel®625 alloy by Hot Pressing (HP)
B. CONTRI, S. VALETTE, P. LEFORT, IRCER (European Ceramics Center), UMR CNRS 7315, University of Limoges, Limoges, France
C:P14 Magnetron-Sputtered MAX/MXene Thin Films: Wafer-Scale Uniformity for Gas Sensing Applications
A. KUMAR GANGWAR1,2, S. MUNIR1,2, R. VILLARROEL1,3, A. ROSENKRANZ1,2, R. ESPINOZA-GONZÁLEZ1,2, 1ANID - Millenium Science Initiative, Millenium Nuclei of Advanced MXenes for Sustainable Applications (AMXSA), Santiago, Chile; 2Departamento de Ingenieria Quimica, Biotecnologia y Materiales, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Santiago, Chile; 3Departamento de Física, Facultad de Ciencias Naturales, Matemática y Medio Ambiente, Universidad Tecnológica Metropolitana, Santiago, Chile
C:P15 Electrocatalytic Properties Evaluation of FeNiMoWCuN High Entropy Alloy Thin Films Fabricated by Magnetron Sputtering: Effect of Nitrogen Contents
BIH-SHOW LOU1,2, GAO-ZHENG DAI3, JYH-WEI LEE3,4,5,6, 1Chemistry Division, Center for General Education, Chang Gung University, Taoyuan, Taiwan; 2Department of Orthopaedic Surgery, New Taipei Municipal TuCheng Hospital, Chang Gung Memorial Hospital, Taiwan; 3Department of Materials Engineering, Ming Chi University of Technology, New Taipei, Taiwan; 4Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei, Taiwan; 5College of Engineering, Chang Gung University, Taoyuan, Taiwan; 6High Entropy Materials Center, National Tsing Hua University, Hsinchu, Taiwan
C:P16 Sol-Gel Derived ZrO₂–Al₂O₃–Nd₂O₃–Sm₂O₃ Coatings on Glass for Enhanced Photovoltaic Performance
S.I. YORDANOV, V.P. PETKOV, M.K. ALEKSANDROVA, S.R. UZUN, B.T. JIVOV, Bulgarian Academy of Science, Sofia, Bulgaria
C:P17 Influence of the Source of Yttrium on the Morphology of Precipitated Phases after Interaction with a CaO-Al2O3-SiO2 Melt at 1300 °C
C. PETITJEAN, P.J. PANTEIX, L. SAINT-JEAN, D. BONINA, M. VILASI, UMR 7198 - IJL- University of Lorraine, Nancy, France; J. BONNAL, Safran Engines; S. ARNAL, Safran Ceramics, France
C:P18 Preparation of Porous Anode Electrode for Solid Oxide Fuel Cell
I-MING HUNG1,2, JU-YU HUNG1, D. MOHANTY1, 1Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan City, Taiwan; 2Hierarchical Green-Energy Materials (Hi-GEM) Research Center, National Cheng Kung University, Tainan, Taiwan
C:P19 Synthesis and Structural Characteristics of Nickel Ferrite Nanoparticles Obtained by Sol-gel by Spontaneous Combustion
A. ZAGREBOVA, Department of Nuclear Physics, New Materials and Technologies, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan
C:P20 Development of Ceramic Membranes for Carbon Dioxide Capture and Detection
R. MUCCILLO, Energy and Nuclear Research Institute, S. Paulo, Brazil
C:P21 Coating Behavior and Adhesion Strength of CVD Processed HfC-HfB2 Layers
BYUNG-HYUK JUN, SUBHIN PARK, JISU LEE, DAEJONG KIM, HYEON-GEUN LEE, Materials Safety Technology Research Division, Korea Atomic Energy Research Institute, Daejeon, Republic of Korea; HYUN JUN RYU, SANHA KIM, Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea
C:P22 Raman Spectroscopic Study of the Effects of Local Stresses on Recrystallization and Phase Transformations During Annealing in Ce-Doped ZrO2
N. VOLODINA, R. SHAKIRZYANOV, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; Yu. GARANIN, M. KALIYEKPEROV, A. KOZLOVSKIY, The Institute of Nuclear Physics, Almaty, Kazakhstan
C:P23 Microstructural and Thermophysical Effects of Y2O3 Doping in Al2O3 – ZrO2 – Y2O3 Ceramics under High-temperature Conditions
Sh.M. KHAMETOV, S.B. SADYKOVA, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan
C:P24 Microstructural Effects of MgO Doping on the Thermal and Radiation Stability of MgLi2ZrO4/Li2ZrO3 Ceramics
A.A. KHAMETOVA, A. KOZLOVSKIY, Astana Branch of the Institute of Nuclear Physics, Astana, Kazakhstan; and L.N. Gumilyov Eurasian National University, Astana, Kazakhstan
C:P25 Radiation-Induced Structural Evolution in Si3N4 Ceramics under 130 MeV Kr^15+ Ion Irradiation at Elevated Temperatures
A.T. ZHUMAZHANOVA, Astana Branch of the Institute of Nuclear Physics, Astana, Kazakhstan
C:P26 Study of Phase Transformations and their Role in Changing the Strength and Thermal Barrier Properties in High-entropy Oxide Ceramics Based on ZrO₂–TiO₂–Nd₂O₃–Ta₂O₃–Yb₂O₃–Y₂O₃ Compounds
I. ZHUMATAYEVA1, A. KOZLOVSKIY1,2, 1L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; 2Astana Branch of the Institute of Nuclear Physics, Astana, Kazakhstan
C:P27 Processing and Structure of High Entropy Electrolytes
M. BIESUZ, University of Trento Levent Karacasulu, University of Trento; A. SARKAR, Indian Institute of Technology Delhi, India
C:P28 Investigation of Novel High-Entropy Rare-Earth Aluminium Garnets
D. VISTORSKAJA, A. KATELNIKOVAS, A. KAREIVA, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Vilnius, Lithuania
C:P29 High-entropy Titanate Based Perovskite Oxides for Capacitive Energy Storage
A. PARYAB, V. SHVARTSMAN, D. LUPASCU, University of Duisburg-Essen, Essen, Germany
C:P30 High-Entropy Multi-Element Doping of LLZO for Room-Temperature Cubic Stabilization and Enhanced Li-Ion Conductivity
GYURI LEE, KYUNGSUN KIM, HAEJIN HWANG, Inha University, Incheon, South Korea
C:P31 Study of the Degradation Kinetics of Surface Layers of Zirconate-based Composite Ceramics under Heavy Ion Irradiation
A.L. KOZLOVSKIY, Institute of Nuclear Physics, Almaty, Kazakhstan; YE O. UNGARBAYEV, NAS Eurasian National University of L.N. Gumilyov, Astana, Kazakhstan; G.ZH. MOLDABAYEVA, Satbayev University, Almaty, Kazakhstan
C:P32 Vibrational Properties of Ti3C2T2 (T = Cl, Br) MXenes
M. RIABOV, H. ROUSSEL, T. OUISSE, H. PAZNIAK, UGA, CNRS, Grenoble INP, LMGP, Grenoble Cedex 1, France; A. CHAMPAGNE, ICMCB, CNRS, Pessac Cedex, Bordeaux, France
C:P33 All-In-One Epoxy/MXene Nanocomposites with Bead-Type Polymeric Imidazole Latent Curing Agent for Enhancing Storage Stability and Flame Retardancy
JAEWOO KIM, Korea Institute of Science and Technology (KIST), Seoul, South Korea
C:P34 Rapid and Selective Detection of Metal Ions with a Gold-MXene Plasmonic Interface for Water Quality
S. ALI1, O. GOGOTSI2, A. RAMANAVICIUS3, S. RAMANAVICIUS1, 1Department of Electrochemical Material Science, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania; 2Materials Research Center, Kyiv, Ukraine; 3Department of Nanotechnology, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania
C:P35 EMI Shielding and Rheological Properties of MXene-magnetic Particle Composites Dispersed in an Epoxy Matrix
B.W. LEE, YOUNG-SEOK KIM, Korea Electronics Technology Institute, South Korea; I.S. HWANG, J.W. LEE, B.G. CHO, NOROO Paint & Coatings, South Korea
C:P36 A Comprehensive Framework for Surface Energy Calculations: Bridging Theoretical and Experimental Predictions from Layered van der Waals Solids to MXenes
G. RIBEIRO PORTUGAL1, NINGJUN CHEN1, Y. GOGOTSI2,3, J. ROSEN1,3, 1Materials Design, Department of Physics, Chemistry and Biology (IFM), Linköping University, Sweden; 2A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, USA; 3Wallenberg Initiative Materials Science for Sustainability (WISE), Linköping University, Sweden
C:P37 Unique All-Paper Dye-Sensitized Solar Cell Enabled by Carbon Nanotube Composite Paper
YI KOU1, TAKAHIDE OYA1,2, 1Graduate School of Engineering Science, Yokohama National University, Yokohama, Japan; 2Semiconductor and Quantum Integrated Electronics Research Center, Institute for Multidisciplinary Sciences, Yokohama National University, Yokohama, Japan
C:P38 Novel Route for the Synthesis of Nd₂Fe₁₄B Permanent Magnet
Kh. NAZARETYAN, A.B. Nalbandyan Institute of Chemical Physics NAS RA, Yerevan, Armenia; A. QUESADA, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain; C.J. FERNÁNDEZ, Istituto dei Materiali per l’Elettronica e il Magnetismo-CNR, Parma; S. AYDINYAN, A.B. Nalbandyan Institute of Chemical Physics, Yerevan, Armenia and Tallinn University of Technology, Tallinn, Estonia
C:P39 Universal and Highly Efficient Degradation Performance of Novel Bi2(O,S)3/Mo(O,S)2 Nanocomposite Photocatalyst Under Visible Light
F. TADESSE BEKENA, DONG-HAU KUO, W. LAKEW KEBEDE, Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan; Department of Chemistry, Arsi University, Asella, Ethiopia
C:P40 Design and Synthesis of Alkaline-activated Materials with Tunable Porosity for Water Pollutant Adsorption
L. PÉREZ-VILLAREJO1,2, S. BUENO-RODRÍGUEZ1,2, D. ELICHE-QUESADA1,2, L. HEJJI1,2, Y. LUNA-GALIANO3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3University of Seville, Chemical and Environmental Engineering Department, Seville, Spain
C:P41 Enhancing Densification of Metakaolin-based Geopolymers via the Cold Sintering Process
S.D. ŠKAPIN1, A. JABR2, S. TOMINC3, N. DANEU1, J. KÖNIG1, V. DUCMAN3, L. KORAT BENSA3, R. BERMEJO2, M. SPREITZER1, 1Advanced Materials Department, “Jožef Stefan” Institute, Ljubljana, Slovenia; 2Department of Materials Science, Montanuniversitaet Leoben, Leoben, Austria; 3Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
C:P42 Cold Sintering of Geopolymer Powders
L. LATTANZI1, A. SIN1,2, J. MENA GARCIA3, C. RANDALL3, P. COLOMBO3,4, 1ITT Motion Technologies, Via Molini, 19, Barge (CN), Italy; 2UniTO-ITT Joint Lab, Torino, Italy; 3Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, USA; 4Department of Industrial Engineering, University of Padova, Padova, Italy
C:P43 Turning Aluminium Salt Slag into High-Performance NaP Zeolite for Sustainable SO2 Adsorption
I. PADILLA, M. ROMERO, A. LÓPEZ-DELGADO, "Eduardo Torroja" Institute for Construction Science, IETcc-CSIC, Madrid, Spain; J. CASAS, A. NIETO-MÁRQUEZ, Higher Technical School of Engineering and Industrial Design, Polytechnic University of Madrid (UPM), Madrid, Spain
C:P44 Development of Sustainable Geopolymeric Catalysts from Industrial Residues and Waste-Derived Activators
D. ELICHE-QUESADA1,2, S. LEÓN-GUTIÉRREZ1, P. DELGADO-PLANA1,2, L. PÉREZ-VILLAREJO1,2, J.A. CECILIA3, A. INFANTES-MOLINA3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3Department of Inorganic Chemistry, Crystallography, and Mineralogy, Faculty of Sciences, University of Málaga, Málaga, Spain
C:P45 Circular Economy Applied to the Development and Recovery of Functional Construction Materials in Aggressive Environment
D. ELICHE-QUESADA1,2, S. LEÓN -GUTIÉRREZ1, P. DELGADO-PLANA1,2, S. BUENO-RODRÍGUEZ, L. PÉREZ-VILLAREJO1,2, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
C:P46 Dielectric Properties of Colossal Permittivity Co-doped (Er, Pr, Ta) Titanium Dioxide
L.A.S. FERREIRA, R. MUCCILLO, E.N.S. MUCCILLO, Energy and Nuclear Research Institute (IPEN), Center of Science and Technology of Materials, São Paulo, SP, Brazil
C:P47 Design and Performance Analysis of a Piezoelectric Sensor for Dynamic Measurement Applications
Z. GHEMARI, S. BELKHIRI, University of M'sila, M'sila, Algeria
C:P48 Performance Enhancement of InGaZnO Thin-Film Transistors by Contact Barrier Modulation Using Oxygen Defects
TAEYOUNG KIM, YOONSOK KIM, JUNTAE AHN, EUN KYU KIM, Department of Physics, Hanyang University, Seoul, Republic of Korea
C:P49 Effect of Composition Control on the Mobility-Stability Trade-off in Hf-In-Zn-O Thin-Film Transistors
SANG JI KIM, TAE HO KIM, HYEON JI KIM, SANG YEOL LEE, Gachon University, Seongnam-si, South Korea
C:P50 CaAl2Si2O8 Study Doped with Eu3+ and Tb3+ Prepared by the Sol-gel Method
M.J. SOTO-MIRANDA, A. DE J. MORALES-RAMÍREZ, H.J. DORANTES-ROSALES, F. JUÁREZ-LÓPEZ, M. GARCÍA-HERNÁNDEZ, Instituto Politécnico Nacional, Unidad Profesional Adolfo López Mateos, Zacatenco, Alcaldía Gustavo A. Madero, Mexico City, Mexico
C:P51 Luminescence Characteristics of LaScO₃:Yb³⁺,Er³⁺ Prepared via Sol-Gel Method
J. JANUSKEVICIUS, Z. STANKEVICIUTE, A. KATELNIKOVAS, A. KAREIVA, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
C:P52 Suppression of Via-Sidewall Damage in Glass Interposers via Femtosecond Burst-Mode Laser Drilling
JAEBEOM LEE, JIYONG PARK, Advanced Packaging Integration Center, Korea Institute of Industrial Technology, Incheon, Republic of Korea; Korea National University of Science and Technology (UST), Daejeon, Republic of Korea
C:P53 Analysis of Thermal Transformations and Characterization of Raw and Calcined Phosphogypsum from Djebel Onk Phosphate
A. GRAIRIA1,2, S. TLILI1, A. AZZI1, A. MEBREK1, W. GHENNAI1, 1Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria; 2Foundry Laboratory, Badji Mokhtar University, Annaba, Algeria
C:P54 Influence of the Nature of the Exogenous Siliceous Source on Mullite Formation from Hydrodesulfurisation (HDS) Catalyst Waste
M. ROMERO, R. CARRIZOSA, I. PADILLA, A. LÓPEZ-DELGADO, Eduardo Torroja Institute for Construction Sciences (IETcc-CSIC), Madrid, Spain; A. DE NONI Jr., Postgraduate Programme in Chemical Engineering, Federal University of Santa Catarina (UFSC), Florianópolis, Brazil
C:P55 Ultrafine-Bubble-Assisted Zeolite Synthesis from Coal Ash
TAKAYUKI NURUYU1,2, AYAKA TSUTSUMIUCHI2, KENJI SHIDA1, SHINFUKU NOMURA3, MOTOHIDE MATSUDA1, 1Graduate School of Science and Technology, Kumamoto University, Kumamoto City, Japan; 2FKG Corporation Inc., Japan; 3Graduate School of Science and Engineering, Ehime University, Japan
C:P56 Toward Sustainable Porcelain Stoneware: Valorization of Local Raw Materials and Industrial Waste
S. CONTE, CNR-ISSMC, National Research Council, Institute of Science, Technology and Sustainability for Ceramics; F. COLOMBO, R. FANTINI, A.F. GUALTIERI, M. SISTI, R. ARLETTI, Department of Chemical and Geological Sciences, University of Modena and Reggio Emilia
C:P57 Influence of the CaO and Glass Phase Content on the Temperature Dependence of Young’s Modulus and Thermal Cycling Behavior of Silica Refractories
E. GREGOROVÁ, W. PABST, P. ŠPRINGER ŠIMONOVÁ, University of Chemistry and Technology, Prague (UCT Prague), Czech Republic; P. BEZDIČKA, Institute of Inorganic Chemistry, Czech Academy of Sciences, Řež, Czech Republic
C:P58 Study of the Effect of Composition Variation on the Mechanical Properties of ZrO2-MgO-Al2O3 Ceramics
M.E. KALIYEKPEROV, R.I. SHAKIRZYANOV, Laboratory of Solid State Physics, The Institute of Nuclear Physics, Almaty, Kazakhstan
C:P59 Effect of Hexagonal BN Particle Size and Volume Fraction on the Machinability of Si3N4 Ceramic Substrates
HEE YEON JEON, JEONG HYUN KIM, KYUNG-SHIK YOON, HYEON SEONG KIM, JAE MIN PARK, YOUNG-IN LEE, Seoul National University of Science and Technology, Seoul, Republic of Korea
C:P60 Implementation of Superconducting Materials in the Design of the Synchronous Machine
S. BELKHIRI, Z. GHEMARI, University of M'sila, M'sila, Algeria
C:P61 Prediction of SJTM Observables in Putative PDW State in Cuprates
M. GOPE, S. CHATURVEDI, P. CHOUBEY, Department of Physics, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, India
C:P62 Point-contact Enhanced Superconductivity in Trigonal PtBi2
O.E. KVITNITSKAYA1,2, L. HARNAGEA1,3, G. SHIPUNOV1, S. ASWARTHAM1, D.V. EFREMOV1, B. BÜCHNER1,4, Yu.G. NAIDYUK2, 1Leibniz Institute for Solid State and Materials Research, IFW Dresden, Dresden, Germany; 2B. Verkin Institute for Low Temperature Physics and Engineering, NAS of Ukraine, Kharkiv, Ukraine; 3I-HUB Quantum Technology Foundation, Indian Institute of Science Education and Research (IISER), Pune, India; 4Institute of Solid State and Materials Physics and Würzburg-Dresden Cluster of Excellence ct.qmat, Technische Universität Dresden, Dresden, Germany
C:P63 Enhancing Biomimetic Calcium Phosphate Deposition on 3D-Printed Al₂O₃/5%vol ZrO₂ Scaffolds via Atmospheric Pressure Plasma Jet Activation
R. CASTANEDA-BAUTA, Postgraduate Programme in Materials Science and Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; J.A. FERREIRA, Department of Biosystems Engineering, FZEA, USP, Brazil; F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP, Brazil
C:P64 Nitrides Reinforced Polyvinylpyrrolidone Scaffolds for Wound Healing
S. CHETTRI1,2, QINGYU YANG1, V. GADDH1, D. SEETHARAMAN2, H. ENGQVIST1, WEI XIA1, 1Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden; 2Department of Physics, Sri Sathya Sai Institute of Higher Learning, Andhra Pradesh, India
C:P65 GLAD-Engineered Thin Films for Surface Plasmon Resonance Biosensors
S. KARCZ, D. GROCHALA, A. PALECZEK, M. KOCON, T. MACHNIK, J. MRZYGŁOD, A. MAREK, A. RYDOSZ, AGH University of Krakow, Krakow, Poland
C:P66 Nanocomposite Based on Strontium-doped Hydroxyapatite and Boron Nitride Nanotubes for Bioapplications as Drug Delivery Systems
K. DE PAULA AMARAL, L. ARANTES FERNANDES VIEIRA, E. MARTINS BARROS DE SOUSA, Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, Brazil
C:P67 Development of a Tricalcium Silicate and Zinc Oxide-Based Restorative Endodontic Cement: Study of Physicochemical Properties and Biocompatibility
T.B. WERMUTH, G.A.A. BETINELLI, A.V. BERNARDES, F.R. PEREIRA, O.R.K. MONTEDO, S. ARCARO, Graduate Program in Materials Science and Engineering (PPGCEM), Universidade do Extremo Sul Catarinense (UNESC), Criciúma, Santa Catarina, Brazil; M.J.P.M. RIBEIRO, Research Unit in Materials, Energy and Environment for Sustainability, Polytechnic Institute of Viana do Castelo (IPVC), Viana do Castelo, Portugal
C:P68 Combining Hydroxyapatite/BNNT Nanocomposite with Carboxymethyl Cellulose for Biomedical Applications
L.A.F. VIEIRA, E.M.B. DE SOUSA, R.G. DE SOUSA, Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, Minas Gerais Belo Horizonte, Brazil; Universidade Federal de Minas Gerais – UFMG, Departamento de Engenharia Química, Belo Horizonte, MG, Brazil
C:P69 Comparative Effects of Atmospheric Pressure Plasma Jet Activation and Phosphoric Acid Pretreatments on Biomimetic CaP Coating and Cellular Response in 3D-Printed Alumina Scaffolds
J.A. FERREIRA, Department of Biosystems Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; R. CASTANEDA-BAUTA, F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP
C:P70 The Effect of Ionizing Radiation on the Structural Stability of ZnFe2O4 Nanocomposites
K.B. KALIYEKPEROVA, A.L. KOZLOVSKIY, Laboratory of Solid State Physics, The Institute of Nuclear Physics, Almaty, Kazakhstan
P.V. ISTOMIN, I.M. BELYAEV, E.I. ISTOMINA, A.V. NADUTKIN, V.E. GRASS, Yu.P. ISTOMINA, Institute of Chemistry of Federal Research Centre “Коmi Science Centre of the Ural Branch of the Russian Academy of Sciences”, Syktyvkar, Russia
C:P02 The Influence of Low-temperature Hydrothermal Synthesis Parameters on the Possibility of Obtaining Multi-doped ZrO2
Y.A. GARANIN1,2, R.I. SHAKIRZYANOV1,2, M.E. KALIYEKPEROV1, 1Engineering Profile Laboratory, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; 2Laboratory of Solid State Physics, Astana branch of the Institute of Nuclear Physics, Astana, Kazakhstan
C:P03 Gas-phase Synthesis of Nanocrystalline SiC
E.I. ISTOMINA, P.V. ISTOMIN, A.V. NADUTKIN, V.E. GRASS, I.M. BELYAEV, O.G. BAEVA, Yu.P. Istomina Institute of Chemistry FRC KomiSC UrB RAS, Syktyvkar, Russia
C:P04 Effect of Calcination Temperature on Characterization of Natural Hydroxyapatite Prepared from Bovine Bones
A. AZZI, A. GRAIRIA, A. MEBREK, H. REZZEG, Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria
C:P05 Turning Industrial Phosphogypsum Waste into Next-Generation Bioceramics for a Sustainable Future
E. JURSENE, A. PADARAUSKAS, I. GRIGORAVICIUTE, A. KAREIVA, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
C:P06 The High-pressure Sintered TiAl-Ti2B Composites
V. MAKSIMOVIĆ1, V. URBANOVICH2, J. MALETAŠKIĆ1, V. PAVKOV1, I. CVIJOVIĆ-ALAGIĆ1, 1Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia; 2SSPA “Scientific-Practical Materials Research Centre of NAS of Belarus”, Minsk, Belarus
C:P07 Everglass Database: Development of a Python-Based Tool for Visualization of Glass Properties and Modelling Applications
G. GORNI, M.J. PASCUAL, Ceramics and Glass Institute, CSIC, Madrid, Spain; A. EISENTRÄGER, J. KUHNERT, Fraunhofer ITWM, Kaiserslautern, Germany; R. COMESAÑA, J. POU, LaserON, CINTECX, University of Vigo, Vigo, Spain
C:P08 Eco-Friendly Ceramic 3D Printing via Selective Reaction Hardening of Alginic Acid–Based Low-Polymer Slurries
JEONGHONG HA, JUNGSUB KIM, JONG WAN KO, Korea Institute of Industrial Technology, Ulsan, South Korea
C:P09 3D Printing by PBF-LB/M to Obtain a Biodegradable Mg based Multi Material
D. RADUCANU1, V.D. COJOCARU1, R.E. HENDEA2, A. NOCIVIN3, D. STANCIU2, M.E. COJOCARU1, N. ZARNESCU1, 1POLITEHNICA University of Bucharest, Bucharest, Romania; 2ZIRCON DENT SRL, Cluj Napoca, Romania; 3OVIDIUS University of Constanta, Constanta, Romania
C:P10 Digital Light Processing 3D Printing Of Large-Scale And Crack-Free Ceramics With Perforated Internal Honeycomb Structures
SIQIAN WU1, RONG WANG1, LIUCHAO JIN1,2, XINGJIAN HUANG1, WUZHAO LI1, KUN ZHOU3, QI GE1, 1Shenzhen Key Laboratory for Additive Manufacturing of High-Performance Materials, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China; 2Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Hong Kong, China; 3Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore
C:P11 Binder-jetted Porous Al2O3 Scaffolds with Selective Metal Infiltration for Functionally Graded Metal-Ceramic Composites
KYUNG IL KIM, Korea Institute of Industrial Technology, Incheon, South Korea
C:P12 Numerical and Experimental Analysis of Slot-Die Coating Stability and Substrate Wettability for Slurry-Based Ceramic Additive Manufacturing
JEONGHONG HA, 3D Printing Manufacturing Process Center, Korea Institute of Industrial Technology (KITECH), Ulsan, Republic of Korea
C:P13 Joining Alumina to the Inconel®625 alloy by Hot Pressing (HP)
B. CONTRI, S. VALETTE, P. LEFORT, IRCER (European Ceramics Center), UMR CNRS 7315, University of Limoges, Limoges, France
C:P14 Magnetron-Sputtered MAX/MXene Thin Films: Wafer-Scale Uniformity for Gas Sensing Applications
A. KUMAR GANGWAR1,2, S. MUNIR1,2, R. VILLARROEL1,3, A. ROSENKRANZ1,2, R. ESPINOZA-GONZÁLEZ1,2, 1ANID - Millenium Science Initiative, Millenium Nuclei of Advanced MXenes for Sustainable Applications (AMXSA), Santiago, Chile; 2Departamento de Ingenieria Quimica, Biotecnologia y Materiales, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Santiago, Chile; 3Departamento de Física, Facultad de Ciencias Naturales, Matemática y Medio Ambiente, Universidad Tecnológica Metropolitana, Santiago, Chile
C:P15 Electrocatalytic Properties Evaluation of FeNiMoWCuN High Entropy Alloy Thin Films Fabricated by Magnetron Sputtering: Effect of Nitrogen Contents
BIH-SHOW LOU1,2, GAO-ZHENG DAI3, JYH-WEI LEE3,4,5,6, 1Chemistry Division, Center for General Education, Chang Gung University, Taoyuan, Taiwan; 2Department of Orthopaedic Surgery, New Taipei Municipal TuCheng Hospital, Chang Gung Memorial Hospital, Taiwan; 3Department of Materials Engineering, Ming Chi University of Technology, New Taipei, Taiwan; 4Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei, Taiwan; 5College of Engineering, Chang Gung University, Taoyuan, Taiwan; 6High Entropy Materials Center, National Tsing Hua University, Hsinchu, Taiwan
C:P16 Sol-Gel Derived ZrO₂–Al₂O₃–Nd₂O₃–Sm₂O₃ Coatings on Glass for Enhanced Photovoltaic Performance
S.I. YORDANOV, V.P. PETKOV, M.K. ALEKSANDROVA, S.R. UZUN, B.T. JIVOV, Bulgarian Academy of Science, Sofia, Bulgaria
C:P17 Influence of the Source of Yttrium on the Morphology of Precipitated Phases after Interaction with a CaO-Al2O3-SiO2 Melt at 1300 °C
C. PETITJEAN, P.J. PANTEIX, L. SAINT-JEAN, D. BONINA, M. VILASI, UMR 7198 - IJL- University of Lorraine, Nancy, France; J. BONNAL, Safran Engines; S. ARNAL, Safran Ceramics, France
C:P18 Preparation of Porous Anode Electrode for Solid Oxide Fuel Cell
I-MING HUNG1,2, JU-YU HUNG1, D. MOHANTY1, 1Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan City, Taiwan; 2Hierarchical Green-Energy Materials (Hi-GEM) Research Center, National Cheng Kung University, Tainan, Taiwan
C:P19 Synthesis and Structural Characteristics of Nickel Ferrite Nanoparticles Obtained by Sol-gel by Spontaneous Combustion
A. ZAGREBOVA, Department of Nuclear Physics, New Materials and Technologies, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan
C:P20 Development of Ceramic Membranes for Carbon Dioxide Capture and Detection
R. MUCCILLO, Energy and Nuclear Research Institute, S. Paulo, Brazil
C:P21 Coating Behavior and Adhesion Strength of CVD Processed HfC-HfB2 Layers
BYUNG-HYUK JUN, SUBHIN PARK, JISU LEE, DAEJONG KIM, HYEON-GEUN LEE, Materials Safety Technology Research Division, Korea Atomic Energy Research Institute, Daejeon, Republic of Korea; HYUN JUN RYU, SANHA KIM, Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea
C:P22 Raman Spectroscopic Study of the Effects of Local Stresses on Recrystallization and Phase Transformations During Annealing in Ce-Doped ZrO2
N. VOLODINA, R. SHAKIRZYANOV, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; Yu. GARANIN, M. KALIYEKPEROV, A. KOZLOVSKIY, The Institute of Nuclear Physics, Almaty, Kazakhstan
C:P23 Microstructural and Thermophysical Effects of Y2O3 Doping in Al2O3 – ZrO2 – Y2O3 Ceramics under High-temperature Conditions
Sh.M. KHAMETOV, S.B. SADYKOVA, L.N. Gumilyov Eurasian National University, Astana, Kazakhstan
C:P24 Microstructural Effects of MgO Doping on the Thermal and Radiation Stability of MgLi2ZrO4/Li2ZrO3 Ceramics
A.A. KHAMETOVA, A. KOZLOVSKIY, Astana Branch of the Institute of Nuclear Physics, Astana, Kazakhstan; and L.N. Gumilyov Eurasian National University, Astana, Kazakhstan
C:P25 Radiation-Induced Structural Evolution in Si3N4 Ceramics under 130 MeV Kr^15+ Ion Irradiation at Elevated Temperatures
A.T. ZHUMAZHANOVA, Astana Branch of the Institute of Nuclear Physics, Astana, Kazakhstan
C:P26 Study of Phase Transformations and their Role in Changing the Strength and Thermal Barrier Properties in High-entropy Oxide Ceramics Based on ZrO₂–TiO₂–Nd₂O₃–Ta₂O₃–Yb₂O₃–Y₂O₃ Compounds
I. ZHUMATAYEVA1, A. KOZLOVSKIY1,2, 1L.N. Gumilyov Eurasian National University, Astana, Kazakhstan; 2Astana Branch of the Institute of Nuclear Physics, Astana, Kazakhstan
C:P27 Processing and Structure of High Entropy Electrolytes
M. BIESUZ, University of Trento Levent Karacasulu, University of Trento; A. SARKAR, Indian Institute of Technology Delhi, India
C:P28 Investigation of Novel High-Entropy Rare-Earth Aluminium Garnets
D. VISTORSKAJA, A. KATELNIKOVAS, A. KAREIVA, Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Vilnius, Lithuania
C:P29 High-entropy Titanate Based Perovskite Oxides for Capacitive Energy Storage
A. PARYAB, V. SHVARTSMAN, D. LUPASCU, University of Duisburg-Essen, Essen, Germany
C:P30 High-Entropy Multi-Element Doping of LLZO for Room-Temperature Cubic Stabilization and Enhanced Li-Ion Conductivity
GYURI LEE, KYUNGSUN KIM, HAEJIN HWANG, Inha University, Incheon, South Korea
C:P31 Study of the Degradation Kinetics of Surface Layers of Zirconate-based Composite Ceramics under Heavy Ion Irradiation
A.L. KOZLOVSKIY, Institute of Nuclear Physics, Almaty, Kazakhstan; YE O. UNGARBAYEV, NAS Eurasian National University of L.N. Gumilyov, Astana, Kazakhstan; G.ZH. MOLDABAYEVA, Satbayev University, Almaty, Kazakhstan
C:P32 Vibrational Properties of Ti3C2T2 (T = Cl, Br) MXenes
M. RIABOV, H. ROUSSEL, T. OUISSE, H. PAZNIAK, UGA, CNRS, Grenoble INP, LMGP, Grenoble Cedex 1, France; A. CHAMPAGNE, ICMCB, CNRS, Pessac Cedex, Bordeaux, France
C:P33 All-In-One Epoxy/MXene Nanocomposites with Bead-Type Polymeric Imidazole Latent Curing Agent for Enhancing Storage Stability and Flame Retardancy
JAEWOO KIM, Korea Institute of Science and Technology (KIST), Seoul, South Korea
C:P34 Rapid and Selective Detection of Metal Ions with a Gold-MXene Plasmonic Interface for Water Quality
S. ALI1, O. GOGOTSI2, A. RAMANAVICIUS3, S. RAMANAVICIUS1, 1Department of Electrochemical Material Science, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania; 2Materials Research Center, Kyiv, Ukraine; 3Department of Nanotechnology, State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania
C:P35 EMI Shielding and Rheological Properties of MXene-magnetic Particle Composites Dispersed in an Epoxy Matrix
B.W. LEE, YOUNG-SEOK KIM, Korea Electronics Technology Institute, South Korea; I.S. HWANG, J.W. LEE, B.G. CHO, NOROO Paint & Coatings, South Korea
C:P36 A Comprehensive Framework for Surface Energy Calculations: Bridging Theoretical and Experimental Predictions from Layered van der Waals Solids to MXenes
G. RIBEIRO PORTUGAL1, NINGJUN CHEN1, Y. GOGOTSI2,3, J. ROSEN1,3, 1Materials Design, Department of Physics, Chemistry and Biology (IFM), Linköping University, Sweden; 2A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, USA; 3Wallenberg Initiative Materials Science for Sustainability (WISE), Linköping University, Sweden
C:P37 Unique All-Paper Dye-Sensitized Solar Cell Enabled by Carbon Nanotube Composite Paper
YI KOU1, TAKAHIDE OYA1,2, 1Graduate School of Engineering Science, Yokohama National University, Yokohama, Japan; 2Semiconductor and Quantum Integrated Electronics Research Center, Institute for Multidisciplinary Sciences, Yokohama National University, Yokohama, Japan
C:P38 Novel Route for the Synthesis of Nd₂Fe₁₄B Permanent Magnet
Kh. NAZARETYAN, A.B. Nalbandyan Institute of Chemical Physics NAS RA, Yerevan, Armenia; A. QUESADA, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain; C.J. FERNÁNDEZ, Istituto dei Materiali per l’Elettronica e il Magnetismo-CNR, Parma; S. AYDINYAN, A.B. Nalbandyan Institute of Chemical Physics, Yerevan, Armenia and Tallinn University of Technology, Tallinn, Estonia
C:P39 Universal and Highly Efficient Degradation Performance of Novel Bi2(O,S)3/Mo(O,S)2 Nanocomposite Photocatalyst Under Visible Light
F. TADESSE BEKENA, DONG-HAU KUO, W. LAKEW KEBEDE, Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan; Department of Chemistry, Arsi University, Asella, Ethiopia
C:P40 Design and Synthesis of Alkaline-activated Materials with Tunable Porosity for Water Pollutant Adsorption
L. PÉREZ-VILLAREJO1,2, S. BUENO-RODRÍGUEZ1,2, D. ELICHE-QUESADA1,2, L. HEJJI1,2, Y. LUNA-GALIANO3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3University of Seville, Chemical and Environmental Engineering Department, Seville, Spain
C:P41 Enhancing Densification of Metakaolin-based Geopolymers via the Cold Sintering Process
S.D. ŠKAPIN1, A. JABR2, S. TOMINC3, N. DANEU1, J. KÖNIG1, V. DUCMAN3, L. KORAT BENSA3, R. BERMEJO2, M. SPREITZER1, 1Advanced Materials Department, “Jožef Stefan” Institute, Ljubljana, Slovenia; 2Department of Materials Science, Montanuniversitaet Leoben, Leoben, Austria; 3Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
C:P42 Cold Sintering of Geopolymer Powders
L. LATTANZI1, A. SIN1,2, J. MENA GARCIA3, C. RANDALL3, P. COLOMBO3,4, 1ITT Motion Technologies, Via Molini, 19, Barge (CN), Italy; 2UniTO-ITT Joint Lab, Torino, Italy; 3Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, USA; 4Department of Industrial Engineering, University of Padova, Padova, Italy
C:P43 Turning Aluminium Salt Slag into High-Performance NaP Zeolite for Sustainable SO2 Adsorption
I. PADILLA, M. ROMERO, A. LÓPEZ-DELGADO, "Eduardo Torroja" Institute for Construction Science, IETcc-CSIC, Madrid, Spain; J. CASAS, A. NIETO-MÁRQUEZ, Higher Technical School of Engineering and Industrial Design, Polytechnic University of Madrid (UPM), Madrid, Spain
C:P44 Development of Sustainable Geopolymeric Catalysts from Industrial Residues and Waste-Derived Activators
D. ELICHE-QUESADA1,2, S. LEÓN-GUTIÉRREZ1, P. DELGADO-PLANA1,2, L. PÉREZ-VILLAREJO1,2, J.A. CECILIA3, A. INFANTES-MOLINA3, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain; 3Department of Inorganic Chemistry, Crystallography, and Mineralogy, Faculty of Sciences, University of Málaga, Málaga, Spain
C:P45 Circular Economy Applied to the Development and Recovery of Functional Construction Materials in Aggressive Environment
D. ELICHE-QUESADA1,2, S. LEÓN -GUTIÉRREZ1, P. DELGADO-PLANA1,2, S. BUENO-RODRÍGUEZ, L. PÉREZ-VILLAREJO1,2, 1Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain; 2Center for Advanced Studies in Earth Sciences, Energy and Environment (CEACTEMA), University of Jaén, Jaén, Spain
C:P46 Dielectric Properties of Colossal Permittivity Co-doped (Er, Pr, Ta) Titanium Dioxide
L.A.S. FERREIRA, R. MUCCILLO, E.N.S. MUCCILLO, Energy and Nuclear Research Institute (IPEN), Center of Science and Technology of Materials, São Paulo, SP, Brazil
C:P47 Design and Performance Analysis of a Piezoelectric Sensor for Dynamic Measurement Applications
Z. GHEMARI, S. BELKHIRI, University of M'sila, M'sila, Algeria
C:P48 Performance Enhancement of InGaZnO Thin-Film Transistors by Contact Barrier Modulation Using Oxygen Defects
TAEYOUNG KIM, YOONSOK KIM, JUNTAE AHN, EUN KYU KIM, Department of Physics, Hanyang University, Seoul, Republic of Korea
C:P49 Effect of Composition Control on the Mobility-Stability Trade-off in Hf-In-Zn-O Thin-Film Transistors
SANG JI KIM, TAE HO KIM, HYEON JI KIM, SANG YEOL LEE, Gachon University, Seongnam-si, South Korea
C:P50 CaAl2Si2O8 Study Doped with Eu3+ and Tb3+ Prepared by the Sol-gel Method
M.J. SOTO-MIRANDA, A. DE J. MORALES-RAMÍREZ, H.J. DORANTES-ROSALES, F. JUÁREZ-LÓPEZ, M. GARCÍA-HERNÁNDEZ, Instituto Politécnico Nacional, Unidad Profesional Adolfo López Mateos, Zacatenco, Alcaldía Gustavo A. Madero, Mexico City, Mexico
C:P51 Luminescence Characteristics of LaScO₃:Yb³⁺,Er³⁺ Prepared via Sol-Gel Method
J. JANUSKEVICIUS, Z. STANKEVICIUTE, A. KATELNIKOVAS, A. KAREIVA, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
C:P52 Suppression of Via-Sidewall Damage in Glass Interposers via Femtosecond Burst-Mode Laser Drilling
JAEBEOM LEE, JIYONG PARK, Advanced Packaging Integration Center, Korea Institute of Industrial Technology, Incheon, Republic of Korea; Korea National University of Science and Technology (UST), Daejeon, Republic of Korea
C:P53 Analysis of Thermal Transformations and Characterization of Raw and Calcined Phosphogypsum from Djebel Onk Phosphate
A. GRAIRIA1,2, S. TLILI1, A. AZZI1, A. MEBREK1, W. GHENNAI1, 1Research Center in Industrial Technologies CRTI, Cheraga, Algiers, Algeria; 2Foundry Laboratory, Badji Mokhtar University, Annaba, Algeria
C:P54 Influence of the Nature of the Exogenous Siliceous Source on Mullite Formation from Hydrodesulfurisation (HDS) Catalyst Waste
M. ROMERO, R. CARRIZOSA, I. PADILLA, A. LÓPEZ-DELGADO, Eduardo Torroja Institute for Construction Sciences (IETcc-CSIC), Madrid, Spain; A. DE NONI Jr., Postgraduate Programme in Chemical Engineering, Federal University of Santa Catarina (UFSC), Florianópolis, Brazil
C:P55 Ultrafine-Bubble-Assisted Zeolite Synthesis from Coal Ash
TAKAYUKI NURUYU1,2, AYAKA TSUTSUMIUCHI2, KENJI SHIDA1, SHINFUKU NOMURA3, MOTOHIDE MATSUDA1, 1Graduate School of Science and Technology, Kumamoto University, Kumamoto City, Japan; 2FKG Corporation Inc., Japan; 3Graduate School of Science and Engineering, Ehime University, Japan
C:P56 Toward Sustainable Porcelain Stoneware: Valorization of Local Raw Materials and Industrial Waste
S. CONTE, CNR-ISSMC, National Research Council, Institute of Science, Technology and Sustainability for Ceramics; F. COLOMBO, R. FANTINI, A.F. GUALTIERI, M. SISTI, R. ARLETTI, Department of Chemical and Geological Sciences, University of Modena and Reggio Emilia
C:P57 Influence of the CaO and Glass Phase Content on the Temperature Dependence of Young’s Modulus and Thermal Cycling Behavior of Silica Refractories
E. GREGOROVÁ, W. PABST, P. ŠPRINGER ŠIMONOVÁ, University of Chemistry and Technology, Prague (UCT Prague), Czech Republic; P. BEZDIČKA, Institute of Inorganic Chemistry, Czech Academy of Sciences, Řež, Czech Republic
C:P58 Study of the Effect of Composition Variation on the Mechanical Properties of ZrO2-MgO-Al2O3 Ceramics
M.E. KALIYEKPEROV, R.I. SHAKIRZYANOV, Laboratory of Solid State Physics, The Institute of Nuclear Physics, Almaty, Kazakhstan
C:P59 Effect of Hexagonal BN Particle Size and Volume Fraction on the Machinability of Si3N4 Ceramic Substrates
HEE YEON JEON, JEONG HYUN KIM, KYUNG-SHIK YOON, HYEON SEONG KIM, JAE MIN PARK, YOUNG-IN LEE, Seoul National University of Science and Technology, Seoul, Republic of Korea
C:P60 Implementation of Superconducting Materials in the Design of the Synchronous Machine
S. BELKHIRI, Z. GHEMARI, University of M'sila, M'sila, Algeria
C:P61 Prediction of SJTM Observables in Putative PDW State in Cuprates
M. GOPE, S. CHATURVEDI, P. CHOUBEY, Department of Physics, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, India
C:P62 Point-contact Enhanced Superconductivity in Trigonal PtBi2
O.E. KVITNITSKAYA1,2, L. HARNAGEA1,3, G. SHIPUNOV1, S. ASWARTHAM1, D.V. EFREMOV1, B. BÜCHNER1,4, Yu.G. NAIDYUK2, 1Leibniz Institute for Solid State and Materials Research, IFW Dresden, Dresden, Germany; 2B. Verkin Institute for Low Temperature Physics and Engineering, NAS of Ukraine, Kharkiv, Ukraine; 3I-HUB Quantum Technology Foundation, Indian Institute of Science Education and Research (IISER), Pune, India; 4Institute of Solid State and Materials Physics and Würzburg-Dresden Cluster of Excellence ct.qmat, Technische Universität Dresden, Dresden, Germany
C:P63 Enhancing Biomimetic Calcium Phosphate Deposition on 3D-Printed Al₂O₃/5%vol ZrO₂ Scaffolds via Atmospheric Pressure Plasma Jet Activation
R. CASTANEDA-BAUTA, Postgraduate Programme in Materials Science and Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; J.A. FERREIRA, Department of Biosystems Engineering, FZEA, USP, Brazil; F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP, Brazil
C:P64 Nitrides Reinforced Polyvinylpyrrolidone Scaffolds for Wound Healing
S. CHETTRI1,2, QINGYU YANG1, V. GADDH1, D. SEETHARAMAN2, H. ENGQVIST1, WEI XIA1, 1Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden; 2Department of Physics, Sri Sathya Sai Institute of Higher Learning, Andhra Pradesh, India
C:P65 GLAD-Engineered Thin Films for Surface Plasmon Resonance Biosensors
S. KARCZ, D. GROCHALA, A. PALECZEK, M. KOCON, T. MACHNIK, J. MRZYGŁOD, A. MAREK, A. RYDOSZ, AGH University of Krakow, Krakow, Poland
C:P66 Nanocomposite Based on Strontium-doped Hydroxyapatite and Boron Nitride Nanotubes for Bioapplications as Drug Delivery Systems
K. DE PAULA AMARAL, L. ARANTES FERNANDES VIEIRA, E. MARTINS BARROS DE SOUSA, Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, Brazil
C:P67 Development of a Tricalcium Silicate and Zinc Oxide-Based Restorative Endodontic Cement: Study of Physicochemical Properties and Biocompatibility
T.B. WERMUTH, G.A.A. BETINELLI, A.V. BERNARDES, F.R. PEREIRA, O.R.K. MONTEDO, S. ARCARO, Graduate Program in Materials Science and Engineering (PPGCEM), Universidade do Extremo Sul Catarinense (UNESC), Criciúma, Santa Catarina, Brazil; M.J.P.M. RIBEIRO, Research Unit in Materials, Energy and Environment for Sustainability, Polytechnic Institute of Viana do Castelo (IPVC), Viana do Castelo, Portugal
C:P68 Combining Hydroxyapatite/BNNT Nanocomposite with Carboxymethyl Cellulose for Biomedical Applications
L.A.F. VIEIRA, E.M.B. DE SOUSA, R.G. DE SOUSA, Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, Minas Gerais Belo Horizonte, Brazil; Universidade Federal de Minas Gerais – UFMG, Departamento de Engenharia Química, Belo Horizonte, MG, Brazil
C:P69 Comparative Effects of Atmospheric Pressure Plasma Jet Activation and Phosphoric Acid Pretreatments on Biomimetic CaP Coating and Cellular Response in 3D-Printed Alumina Scaffolds
J.A. FERREIRA, Department of Biosystems Engineering, Faculty of Animal Science and Food Engineering (FZEA), University of Sao Paulo (USP), Brazil; R. CASTANEDA-BAUTA, F. CAIXETA NUNES, Postgraduate Programme in Materials Science and Engineering, FZEA, USP, Brazil; C. ALVES Jr., Postgraduate Programme in Materiais Science and Engineering, Federal Rural University of Semiarid, Brazil; E. MJA PALLONE, Postgraduate Programme in Materials Science and Engineering, Department of Biosystems Engineering, FZEA, USP
C:P70 The Effect of Ionizing Radiation on the Structural Stability of ZnFe2O4 Nanocomposites
K.B. KALIYEKPEROVA, A.L. KOZLOVSKIY, Laboratory of Solid State Physics, The Institute of Nuclear Physics, Almaty, Kazakhstan